Big Problem with my Max V

Scouser - I've just been on Awsatellites and I can't seem to find any PSU's.

 

You won't as he does not advertise this particular service, either call or email him. Contact details are on their page here

 

I just remembered that even if I get the PSU board, how will it work considering that the new board will not have those three black cables that provide the power from the plug. Won't I need to replace those and not the PSU because those black wires are seperate or am I wrong.

 

Ask him if comes with it, if not he may be able to source it

 

OK Scouser. I'll email him, hopefully he has it. Thanks mate. He sorted the PSU at a good price and is a useful contact in future. Thanks.

 

No worries he is a decent bloke

 

Scouser - He doesn't do them. Do you know where I could get any of those three black cables froms. Thanks

 

Is Scouser or Hiteck here. Does anyone know where I can get those three black cable wires. Without them, the box is useless.

 

Which three black wires are you talking about mate?.

 

Do you know the three black wires from where the power comes from. The ones where they are connected to the PSU by connector (two wires) and the other wire is screwed on the board. One of the wires is burnt or has been accidentally soldered by the moron at the shop.

When I put the power cord in the Max V, there were cracker sounds and I could see white sparkles. There was a minor smell but I'm guessing it's the wire that has been burnt cos I've changed the C14 and the C10.

Do you know what I'm talking about? Do you know where the power cord goes in at the back of the Max V and where the power goes to, it's those three balck wires. Thanks.

 

Do you know what I'm talking about HiTeck?

 

Yes, cant you just put a fresh piece of wire in or cut back the mains lead and re-fit the plug and the earth wire to the board?. (cant quite remember how it is fitted).

 

I'm slightly confused. Anyway if you do remember, let me know. I'll be waiting.