I read a thread in the DVD Shink forum, and that did not help me. I am posting in the newbie forum because I do not know where it is DVD shrink or Nero so hopefully someone will be able to help me in here. I am using DVD shrink and burning with nero 6. I am very new to this, so please be patient. I did check out the guides and they weren't much help for my issue. I get an error, very similiar to the one posted in the DVD shrink forum. I tried what was suggested (checking the ide, setting the transfer mode to DMA, etc) and had no luck. DVD shrink work fine during the analysis and backup. When it's time to write the cd, it goes through what i'm guessing is the "check" but then it will not write. I get this error. Serial removed Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero API version: 6.3.1.11 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <LITE-ON DVDRW SOHW-1613S>Version: AS04 - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : IOMEGA ZIP 100 atapi Port 0 ID 1 DMA: Off CdRomPeripheral : LITE-ON DVDRW SOHW-1613S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1613S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 255MB (261132kB) Free physical memory: 58MB (59960kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.1.2005 NeroAPI 2:28:09 PM #1 Phase 112 File APIProgress.cpp, Line 269 DVD-Video files reallocation started 2:28:09 PM #2 Phase 114 File APIProgress.cpp, Line 269 DVD-Video files reallocation completed (no file modified) 2:28:09 PM #3 Phase 111 File APIProgress.cpp, Line 269 DVD-Video files sorted 2:28:10 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 2:28:10 PM #5 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1613S running 2:28:10 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:28:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:28:10 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:28:10 PM #9 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-At-Once, using DVD media 2:28:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2286175 (508:02.25, 4465MB) 2:28:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 2:28:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1613S, Media type: DVD-R Disc Manufacturer: MXL RG - 02 Disc Application Code: 64, Disc Physical Code: 193 2:28:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 2:28:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [LITE-ON DVDRW SOHW-1613S] -------------------------------------------------------------- 2:28:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1613S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286176 | lead-out | 1 | 0x00 | 0x41 2:28:49 PM #16 Phase 24 File APIProgress.cpp, Line 269 Caching of files started 2:28:49 PM #17 Text 0 File Burncd.cpp, Line 4206 Cache writing successful. 2:28:49 PM #18 Phase 25 File APIProgress.cpp, Line 269 Caching of files completed 2:28:49 PM #19 Phase 36 File APIProgress.cpp, Line 269 Burn process started at 4x (5,540 KB/s) 2:28:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:28:49 PM #21 Text 0 File DVDR.cpp, Line 1664 Recording mode: Sequential Recording Mode 2:28:49 PM #22 Text 0 File Mmc.cpp, Line 20125 Set BUFE: supported -> ON , SMART-BURN : ON 2:28:49 PM #23 Text 0 File DVDR.cpp, Line 1805 Start write address at LBA 0 DVD high compatibility mode: Yes 2:28:49 PM #24 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:29:16 PM #25 Text 0 File Cdrdrv.cpp, Line 1293 14:29:16.609 - LITE-ON DVDRW SOHW-1613S\H1 T0 : Queue again later 2:43:30 PM #26 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1613S> start writing Lead-Out at LBA 2286176 (22E260h), lenght 0 blocks 2:43:30 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 2:43:30 PM #28 Text 0 File DVDR.cpp, Line 2015 EndDAO: Last written address was 2286175 2:44:02 PM #29 SCSI -1194 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x04 2:44:02 PM #30 CDR -1194 File ThreadedTransferInterface.cpp, Line 1701 PMA update failure 2:44:02 PM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701 Could not perform end of Disc-at-once 2:44:02 PM #32 Text 0 File DVDR.cpp, Line 2015 EndDAO: Last written address was -1 2:44:02 PM #33 Phase 38 File APIProgress.cpp, Line 269 Burn process failed at 4x (5,540 KB/s) 2:44:02 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 2:44:02 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 4/2/2004 9:32:20 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) I am using a LITE-ON DVD-+R-+RW with Maxell DVD media. Please help, this is very frustrating.
It's possible to get this error message and for the burn to still be successful. Have you tried to play the burned disk? PMA is the program memory area where info about the areas written on the disk is temporarily stored. This info is then written as the table of contents to the "lead-in" area of the disk when the recording session closes. This error seems to pop up for some reason more often for Lite-On and BenQ burners. Everytime I've gotten this error the disk has been OK and played back without problems. The most likely cause seems to be media related, so changing media or updating firmware may solve the problem if it persists.
As laddyboy said it is likely the media or , Maxell should be good. You could try a burn with DVD Decrypter as a comparison or run through Nero's Test Drive tool. Check your ASPI layer. There are a few to pick from, which is best, depends on your set up. http://aspi.radified.com/ http://ahead.de/en/ASPI_Driver.html http://cd-rw.org/articles/archive/aspisetup.cfm You may just need to clean up Nero. http://ahead.de/en/Clean_Tools.html
Thank you guys so much for your help. I tried compressing and decoding with dvd shrink and burning with decrypter, and it worked like a charm. You guys are good.
