So im gonna explode of anger. It was once possible to burn. But that was some time ago. I dont know why i cant burn now.. Please help! =============================== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22.7.2004 15:33:44 Nero version: 6.3.1.20 Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.20 Adapter driver: <xmasscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : ExcelStor Technology J68 IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-W548E IdeChnDr Port 1 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2500A E: CDRom0 TEAC CD-W548E F: CDRom1 AXV CD/DVD-ROM G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 58MB (60284kB) Memory in use : 88 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.2.2007 UDF/ISO compilation 18:50:44 #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 18:50:44 #2 Phase 114 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed (no file modified) 18:50:44 #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 18:50:44 #4 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 18:50:44 #5 Text 0 File Reader.cpp, Line 126 Reader running 18:50:44 #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 18:50:44 #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 18:50:44 #8 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 18:50:44 #9 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 777679 (172:49.04, 1518MB) 18:50:44 #10 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 18:50:44 #11 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 18:50:44 #12 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:50:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 777680 (777680) = #777680/172:49.5 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 777680 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 18:50:44 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1592688640, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 777680 | lead-out | 1 | 0x00 | 0x41 18:50:44 #15 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 18:50:44 #16 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 18:50:44 #17 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 18:50:44 #18 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 2.4x (3.324 KB/s) 18:50:44 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18:50:44 #20 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 8:26,188 (506188ms) -> OK 18:50:44 #21 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 18:50:44 #22 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON 18:50:44 #23 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 18:50:44 #24 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:50:44 #25 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0B 0xDD 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 18:50:44 #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 18:50:44 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 18:50:44 #28 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 18:50:45 #29 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 14.10.2002 22:00:00 (Adapter driver for rec) File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5248 bytes, created 23.12.2003 0:15:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
your burner has old firmware update to 1.0B: LINK some of your drives are not on DMA.... follow the DMA guide: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues using too much memory ..... shut down unnecessary programs .... you have the minimum requirements of RAM so no multitasking while burning/encoding/transcoding! you are using crappy media.... use better media Made in Japan... look for the MIJ on the label of the box or spindle or just buy Verbatim which is top notch but made in Taiwan/Singapore and the only non MIJ disk allowed near my burner! these drivers are not a windows system files or a windows core files and are deemed to be 40-49% dangerous according to File.net and should be removed. It is not known what these drivers do and this is the first time I ever saw these files! burning too slow is just as bad as burning too fast.... I would burn at 4x with better media! use the best version and most stablest of Nero 6 (6.6.0.18)... your version could be buggy: Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! install package one: http://www.filehippo.com/download_nero_burning_rom/?539 then install package two: http://www.nero.com/nero6/eng/Patch_for_NVE3.html reboot and you're good to go! try again after following these recommendations. good luck!
Thank you! Upgraded firmware, bought better dvds, and did well just about everything you asked! And you know what? It worked! Thank You!