I'm having an issue on burning. I have no problem writing images or backing up my music files to my hard drive but when it comes to burning it onto a cd, it gives me problems. My simulation mode is not on. I 've tried all poss ways of buring using alcohol Clone and Nero burning by using a data cd, audio cd, vcd, svcd, and also burning an image. All three programs I have mentioned above is installed on my computer. (Just wondering, installing all three programs won't mess with the burner, right?) Are there solutions for these problems? Thanx for your time and help
What kind of problems ?? Does it try to burn ? Is your burner being recognized ? You have Nero , what does the Info Tool say ? When you start a thread it makes it so much easier for someone to help you IF you describe the problem and give info on what you done and what errors you are getting -- Smiles.. !!
Sry about that... I'm trying to burn a cd but I'm having trouble doing it. My cd burner is recognized because I can rip images and songs but I can't write it to a cd, so I have all these files I have ripped on my harddrive. I can't really do a system restore because I need the files that contains in my harddrive. I have clone nero and alcohol 120 install currently. I know it's not simulating....cuz I had that problem before... Anymore info I need to give you? Well hope there is a solution to this Thanx for your help and time... I appreciate it!
sry, feel like a complete idiot. Anyways I'll keep it simple. Let's just say that I have an image on my computer and I want to write the image to a cd. I can either use clone nero or alcohol 120%. But the problem is all three programs won't write. I mean it goes through all the writing process and it gets to 100% and the cd pops out and says that your cd is complete. But when I put it back, it's blank. Nothing's been written on it. Same thing when I try burning some backed up music files or important data files. Can't burn it. I know I"m not simulating cuz I had that problem before. Oh and I don't know if this'll help but I believe it's a USB 2.0 So, Anything else I need to tell you? If so please do so. And THANX AGAIN...
Hey Is my Log Error. Do you have any clue on what I should do to fix this error? Thanx for your help and time. ****************************************************** Jay Park Jay Products Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.42 (Nero Express) Recorder: <QSI CDRW/DVD SBW-241> Version: VS03 - HA 1 TA 0 - 5.5.10.42 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <QSI CDRW/DVD SBW-241>Version: VS03 - HA 1 TA 0 - 5.5.10.42 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-241 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 446MB (457712kB) Free physical memory: 206MB (211632kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 30.9.2004 CD-ROM (ISO) 8:20:03 PM #1 Text 0 File Isodoc.cpp, Line 7589 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:20:03 PM #2 Phase 88 File dlgbrnst.cpp, Line 1655 ExacLink activated 8:20:03 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 8:20:03 PM #4 Text 0 File Writer.cpp, Line 125 Writer QSI CDRW/DVD SBW-241 running 8:20:03 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 8:20:03 PM #6 Text 0 File Burncd.cpp, Line 3745 Turn on Track-At-Once, using CD-R/RW media 8:20:03 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 94448 (94448) = #94448/20:59.23 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 8:20:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 225 Last possible write address on media: 359848 (79:59.73) Last address to be written: 94447 (21:01.22) 8:20:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 230 Write in overburning mode: FALSE 8:20:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700 Recorder: QSI CDRW/DVD SBW-241; CDR code: 00 97 34 22; OSJ entry from: Mitsubishi Chemical ATIP Data: Special Info [hex] 1: C0 00 98, 2: 61 22 16 (LI 97:34.22), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 8:20:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder QSI CDRW/DVD SBW-241 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 193736704 8:20:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 1. 8:20:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 94448 (94448) = #94448/20:59.23 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 94446 blocks [QSI CDRW/DVD SBW-241] -------------------------------------------------------------- 8:20:27 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 8:20:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 8:20:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 24x (3,600 KB/s) 8:20:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 8:20:28 PM #18 Text 0 File Mmc.cpp, Line 18419 Set BUFE: ExacLink -> ON 8:23:15 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 8:23:26 PM #20 Text 0 File Mmc.cpp, Line 13417 <QSI CDRW/DVD SBW-241> start Close Session 8:24:07 PM #21 Text 0 File Mmc.cpp, Line 13445 Fixation : Second step for unclosed Sessions 8:24:47 PM #22 Phase 37 File dlgbrnst.cpp, Line 1655 Burn process completed successfully at 24x (3,600 KB/s) 8:24:49 PM #23 Phase 78 File dlgbrnst.cpp, Line 1655 Data verification started 8:24:52 PM #24 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 6405 Cannot mount the written CD "QSI CDRW/DVD SBW-241" (H:1, T:0) 8:24:52 PM #25 Phase 81 File dlgbrnst.cpp, Line 1655 Data verification failed 8:24:52 PM #26 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 12:02:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ******************************************************
Here, I found the log. Are there any ways of fixing this? I used the old nero 5 and I got this log...whew some progress... couldn't even get a log before... Anyways thanx ****************************************************** Jay Park Jay Products Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.42 (Nero Express) Recorder: <QSI CDRW/DVD SBW-241> Version: VS03 - HA 1 TA 0 - 5.5.10.42 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <QSI CDRW/DVD SBW-241>Version: VS03 - HA 1 TA 0 - 5.5.10.42 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-241 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 446MB (457712kB) Free physical memory: 206MB (211632kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 30.9.2004 CD-ROM (ISO) 8:20:03 PM #1 Text 0 File Isodoc.cpp, Line 7589 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:20:03 PM #2 Phase 88 File dlgbrnst.cpp, Line 1655 ExacLink activated 8:20:03 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 8:20:03 PM #4 Text 0 File Writer.cpp, Line 125 Writer QSI CDRW/DVD SBW-241 running 8:20:03 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 8:20:03 PM #6 Text 0 File Burncd.cpp, Line 3745 Turn on Track-At-Once, using CD-R/RW media 8:20:03 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 94448 (94448) = #94448/20:59.23 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 8:20:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 225 Last possible write address on media: 359848 (79:59.73) Last address to be written: 94447 (21:01.22) 8:20:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 230 Write in overburning mode: FALSE 8:20:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700 Recorder: QSI CDRW/DVD SBW-241; CDR code: 00 97 34 22; OSJ entry from: Mitsubishi Chemical ATIP Data: Special Info [hex] 1: C0 00 98, 2: 61 22 16 (LI 97:34.22), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 8:20:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder QSI CDRW/DVD SBW-241 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 193736704 8:20:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 1. 8:20:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 94448 (94448) = #94448/20:59.23 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 94446 blocks [QSI CDRW/DVD SBW-241] -------------------------------------------------------------- 8:20:27 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 8:20:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 8:20:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 24x (3,600 KB/s) 8:20:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 8:20:28 PM #18 Text 0 File Mmc.cpp, Line 18419 Set BUFE: ExacLink -> ON 8:23:15 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 8:23:26 PM #20 Text 0 File Mmc.cpp, Line 13417 <QSI CDRW/DVD SBW-241> start Close Session 8:24:07 PM #21 Text 0 File Mmc.cpp, Line 13445 Fixation : Second step for unclosed Sessions 8:24:47 PM #22 Phase 37 File dlgbrnst.cpp, Line 1655 Burn process completed successfully at 24x (3,600 KB/s) 8:24:49 PM #23 Phase 78 File dlgbrnst.cpp, Line 1655 Data verification started 8:24:52 PM #24 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 6405 Cannot mount the written CD "QSI CDRW/DVD SBW-241" (H:1, T:0) 8:24:52 PM #25 Phase 81 File dlgbrnst.cpp, Line 1655 Data verification failed 8:24:52 PM #26 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 12:02:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
