Burning Problems: Nero 7.0.1.2; PLEXTOR DVDR PX-760SA

Hello all!

At first, I'm no expert. I would be glad if someone can help me with the following problem:

I had problems burning DVDs with my new PLEXTOR DVDR PX-760A. The burning interrupted after 6-12% and I got the following error message:

11:26:52 #130 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: PLEXTOR DVDR PX-760A

After some research I tried several suggested things, such as:
-turned DVD high compatibility mode off
-made a firmware update: from 1.04 to 1.05
-tried different DVD types (Verbatim; DVD-R, DVD+R)

After the firmware update, the simulation funktioned/completed, but the simulated burning needed a lot of time, more than normal, I think.
(The previous simulations also needed many time. However, they don't fail anymore.)

Here is my last burning log:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1614C SW10 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 71MB (73208kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2006
ISO compilation
10:48:17 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:48:22 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

10:48:22 #3 Text 0 File Reader.cpp, Line 124
Reader running

10:48:22 #4 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

10:48:22 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:48:26 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

10:48:28 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1968783 (437:30.33, 3845MB)

10:48:28 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)

10:48:28 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:48:28 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:48:28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1968784 (1968784) = #1968784/437:30.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1968784 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

10:48:28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4032069632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1968784 | lead-out | 1 | 0x41 | 0x00

10:48:28 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:48:28 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

10:48:38 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

10:48:38 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

10:48:38 #17 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started

10:48:39 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:50:45 #19 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 1968784 (1E0A90h), length 0 blocks

10:50:45 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:50:45 #21 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 25,6x (35.338 KB/s)

10:50:46 #22 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 16x (22.160 KB/s)

10:50:47 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:50:47 #24 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

10:50:47 #25 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

10:50:47 #26 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

10:50:47 #27 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:49:18 #28 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 1968784 (1E0A90h), length 0 blocks

11:49:19 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:49:19 #30 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1968783

11:49:19 #31 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

11:49:19 #32 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 16x (22.160 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


I have read in another thread here at afterdawn that the turned-off DMA can be the problem. I followed the instructions of Alcohol (uninstall drivers and restart PC) but they did not function (still turned-off).

What else can I do?

 

Nero doesn't see the Via controllers correctly, it seems to me, so they will usually show DMA off for them.

You might try turning off the Speed check and burning at 4x.

The log doesn't show any errors and states simulation was finished successfully. If it then shows an error burning, I would try a slower speed first.

You might also try burning the project to your hard drive to see if it finishes correctly that way. Then burn the image using NeroBurning ROM.

 

http://forums.afterdawn.com/thread_view.cfm/260038

Use that guide to turn your DMA back on. Plus heres a link to download the lastest Nero.

http://ww2.nero.com/nero7/enu/nero7-up.php

Just use that link but before your download it use nero's own cleantool to uninstall your version first.

Good luck

 

What do you mean with "tunrning off the Speed?" Do you mean that I shall remove the automatic max speed when burning and use 4x instead?
(Sorry, my English is limited... I come from Germany.)


I tried to burn an image and my old error occurred again (Reset occurred). Here is the log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1614C SW10 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 283MB (290376kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2006
Burn DVD Image
20:08:57 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

20:08:57 #2 Text 0 File Reader.cpp, Line 124
Reader running

20:08:57 #3 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

20:08:57 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 6258688
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=00:40.56 ( 3056) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\Eigene Dateien\QA#5Image.nrg>

20:08:57 #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

20:08:57 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 3055 ( 0:40.55, 5MB)

20:08:57 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

20:08:57 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

20:08:57 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:08:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 3056 (3056) = #3056/0:40.56
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3056 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

20:08:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6258688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3056 | lead-out | 1 | 0x41 | 0x00

20:08:57 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:08:57 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

20:08:57 #14 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

20:08:57 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

20:08:57 #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 16x (22.160 KB/s)

20:08:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:08:57 #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

20:08:57 #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

20:08:57 #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

20:08:57 #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:08:57 #22 Text 0 File Cdrdrv.cpp, Line 1197
20:08:57.484 - E: PLEXTOR DVDR PX-760A : Queue again later

20:09:51 #23 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x05180000: Len x10000
0x69 6E 6B 20 85 20 67 65 69 73 74 69 67 20 75 6D
0x6E 65 62 65 6C 74 20 67 65 77 65 73 65 6E 2E 20
0x54 68 65 20 73 65 63 72 65 74 20 64 6F 6F 72 20

20:09:54 #24 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x04e0e400: Len x10000
0x69 6E 6B 20 85 20 67 65 69 73 74 69 67 20 75 6D
0x6E 65 62 65 6C 74 20 67 65 77 65 73 65 6E 2E 20
0x54 68 65 20 73 65 63 72 65 74 20 64 6F 6F 72 20

20:09:54 #25 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: PLEXTOR DVDR PX-760A

20:09:54 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:09:54 #27 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31

20:09:58 #28 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

20:09:58 #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 16x (22.160 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


What can I do that Nero sees the Via controllers correctly? Here is some additional information from the Nero Info Tool:


Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel

Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver

Attached Devices

Adapter 2
---------
Description : Secondary IDE Channel

Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver

Attached Devices

Adapter 3
---------
Description : VIA Serial ATA RAID Controller

Driver
Description : system32\drivers\viasraid.sys
Company : VIA Technologies inc,.ltd
Version : 5.1.2600.220
Description : VIA SATA RAID DRIVER FOR WINXP

Attached Devices
Description : ID 0 (0): SAMSUNG SP1614C SW10
Type : Disk Drive
Description : ID 2 (0): PLEXTOR DVDR PX-760A 1.05
Type : CD-Rom Drive
Autorun : On

Adapter 4
---------
Description : WinXP Promise FastTrak 378 (tm) Controller

Driver
Description : system32\DRIVERS\fasttx2k.sys
Company : Promise Technology, Inc.
Version : 1.00.1.37
Description : Promise Driver for Windows XP

Attached Devices
Description : ID 4 (0): Promise RAID Console 1.00
Type : Disk Drive

Adapter 5
---------
Description : D347PRT SCSI Controller

Driver
Description : System32\Drivers\d347prt.sys
Company :
Version : 3.47.0.0 built by: WinDDK
Description : SCSI miniport

Attached Devices

Adapter 6
---------
Description : VIA USB erweiterter Hostcontroller

Driver
Description : system32\DRIVERS\usbehci.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : EHCI eUSB Miniport Driver

Attached Devices
Description : LEXAR JUMPDRIVE SPORT USB Device
Type : Disk Drive

Hardware Information
--------------------
CPU : AMD Athlon 64 Processor 3200+ 2000 MHz
Bus Speed : 200 MHz
Motherboard : ASUSTeK A8V Deluxe
System : To To Be Filled By O.E.M.
BIOS : AMI 1008.003
Memory : 512 MB
Sound : Realtek AC97 Audio
Video : NVIDIA GeForce 6800 GT

ASPI Information
----------------
System ASPI : ASPI is not installed

Nero ASPI : ASPI is installed and working properly

wnaspi32.dll : 2.0.1.74 164112 bytes November 02, 2004

 

I tried the guide already (see my first post above) and it did not function. Perhaps this is another case. It seems that DMA is not installed. Could that be? If so, what I have to do?

 

Update your Nero from here

http://www.filehippo.com/download_nero_7_premium/

As the version you are currently using, 7.0.1.2 is known to be "bug free" then there is no need to run any clean tools


and as previously advised

Slow your burn to 4X

 

I have tried to burn with 6x (have no slower one found) and the burning failed again. Here is the log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1614C SW10 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 134MB (137848kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2006
ISO compilation
11:10:43 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:10:43 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

11:10:43 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:10:43 #4 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

11:10:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:10:43 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

11:10:43 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 3071 ( 0:40.71, 5MB)

11:10:43 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

11:10:43 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:10:43 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:10:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3072 (3072) = #3072/0:40.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3072 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

11:10:43 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6291456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3072 | lead-out | 1 | 0x41 | 0x00

11:10:43 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:10:43 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

11:10:43 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

11:10:43 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

11:10:43 #17 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 6x (8.310 KB/s)

11:10:43 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:10:43 #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

11:10:43 #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

11:10:43 #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

11:10:43 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:10:54 #23 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 3072 (C00h), length 0 blocks

11:10:54 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:10:54 #25 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 3071

11:10:54 #26 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

11:10:54 #27 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 6x (8.310 KB/s)

11:10:55 #28 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8.310 KB/s)

11:10:55 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:10:55 #30 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

11:10:55 #31 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

11:10:55 #32 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

11:10:55 #33 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30BFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 3FF00 h
Start sector number of the next Border-In: 46EA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 03 FF 00 00 04 6E A0 - 00 00 00 00 00 00 00 00 ..ÿ...n.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:10:56 #34 Text 0 File Cdrdrv.cpp, Line 1197
11:10:56.234 - E: PLEXTOR DVDR PX-760A : Queue again later

11:11:40 #35 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04f50000: Len x10000
0x65 6E 74 75 72 65 2C 20 73 69 64 65 62 61 72 3F
0x29 2C 20 77 68 6F 73 65 20 6C 6F 63 61 6C 20 6C
0x65 61 64 65 72 20 69 6E 20 43 6C 65 61 72 77 6F

11:11:43 #36 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x057afa00: Len x10000
0x65 6E 74 75 72 65 2C 20 73 69 64 65 62 61 72 3F
0x29 2C 20 77 68 6F 73 65 20 6C 6F 63 61 6C 20 6C
0x65 61 64 65 72 20 69 6E 20 43 6C 65 61 72 77 6F

11:11:43 #37 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: PLEXTOR DVDR PX-760A

11:11:43 #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:11:43 #39 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31

11:11:47 #40 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

11:11:48 #41 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8.310 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



In another thread in this forum a member had similiar problems with the same DVD-recorder:

http://forums.afterdawn.com/thread_view.cfm/422049

I discovered that I had no ASPI layer/no ASPI drivers in the windows directories. So, I tried the suggested ForceASPI. Nero-Info now sees Windows ASPI(s), but the burning at 6x still fails:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1614C SW10 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 140MB (143836kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2006
ISO compilation
11:23:31 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:23:31 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

11:23:31 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:23:31 #4 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

11:23:31 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:23:32 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

11:23:32 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 3071 ( 0:40.71, 5MB)

11:23:32 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

11:23:32 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:23:32 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:23:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3072 (3072) = #3072/0:40.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3072 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

11:23:32 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6291456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3072 | lead-out | 1 | 0x41 | 0x00

11:23:32 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:23:32 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

11:23:32 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

11:23:32 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

11:23:32 #17 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 6x (8.310 KB/s)

11:23:32 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:23:32 #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

11:23:32 #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

11:23:32 #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

11:23:32 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:23:40 #23 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 3072 (C00h), length 0 blocks

11:23:41 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:23:41 #25 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 3071

11:23:41 #26 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

11:23:41 #27 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 6x (8.310 KB/s)

11:23:42 #28 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8.310 KB/s)

11:23:42 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:23:42 #30 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

11:23:42 #31 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

11:23:42 #32 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

11:23:42 #33 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30BFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 3FF00 h
Start sector number of the next Border-In: 46EA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 03 FF 00 00 04 6E A0 - 00 00 00 00 00 00 00 00 ..ÿ...n.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:23:43 #34 Text 0 File Cdrdrv.cpp, Line 1197
11:23:43.093 - E: PLEXTOR DVDR PX-760A : Queue again later

11:24:29 #35 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0a4b0000: Len x10000
0x65 6E 74 75 72 65 2C 20 73 69 64 65 62 61 72 3F
0x29 2C 20 77 68 6F 73 65 20 6C 6F 63 61 6C 20 6C
0x65 61 64 65 72 20 69 6E 20 43 6C 65 61 72 77 6F

11:24:32 #36 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x057b1000: Len x10000
0x65 6E 74 75 72 65 2C 20 73 69 64 65 62 61 72 3F
0x29 2C 20 77 68 6F 73 65 20 6C 6F 63 61 6C 20 6C
0x65 61 64 65 72 20 69 6E 20 43 6C 65 61 72 77 6F

11:24:32 #37 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: PLEXTOR DVDR PX-760A

11:24:32 #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:24:33 #39 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31

11:24:37 #40 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

11:24:37 #41 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8.310 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


I also discovered that I have no driver for the DMA-Controller installed. That's why I think, I'm unable to turn the DMA on.?. Under the properties of the Primary and Secondary IDE-Channels also stands that DMA is not usable (if I translate it correctly). Do I need to install the DMA-Controller (probably yes)? Where can I download it?

I have not tried the Nero-Update yet!

 

What I see there is

Go into nero and select file, options, then expert features and turn off the enable short lead out.

See if that helps, because it seems that is where the failed burn is happening.

 

At first, I have updated my Via drivers and hoped that would change my burning problem, but that did not help.

Regarding the "short lead out" feature, that is strange. I had already disabled this feature. I checked this again : enabled and disabled. I burned a small file each. The enabled burning failed. The disabled burning succeeded!!!

However, the burning duration in general seems very long... Could it be because my recorder is connected to a Serial ATA connector (SATA2) instead on a IDE connector. Here is my last log:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 2 ID 4 DMA: Off
DiskPeripheral : SAMSUNG SP1614C SW10 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viamraid Port 4 ID 2 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 164MB (168676kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2006
ISO compilation
18:55:23 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:55:23 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

18:55:23 #3 Text 0 File Reader.cpp, Line 124
Reader running

18:55:23 #4 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

18:55:23 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

18:55:23 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

18:55:24 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 3071 ( 0:40.71, 5MB)

18:55:24 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

18:55:24 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

18:55:24 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:55:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3072 (3072) = #3072/0:40.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3072 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

18:55:24 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6291456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3072 | lead-out | 1 | 0x41 | 0x00

18:55:24 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:55:24 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

18:55:24 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

18:55:24 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

18:55:24 #17 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 6x (8.310 KB/s)

18:55:24 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:55:24 #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

18:55:24 #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

18:55:24 #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

18:55:24 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:55:28 #23 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 3072 (C00h), length 0 blocks

18:55:28 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:55:28 #25 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 3071

18:55:28 #26 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

18:55:28 #27 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 6x (8.310 KB/s)

18:55:29 #28 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8.310 KB/s)

18:55:29 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:55:29 #30 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

18:55:29 #31 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON

18:55:29 #32 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: No

18:55:29 #33 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30BFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 3FF00 h
Start sector number of the next Border-In: 46EA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 03 FF 00 00 04 6E A0 - 00 00 00 00 00 00 00 00 ..ÿ...n.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:55:30 #34 Text 0 File Cdrdrv.cpp, Line 1197
18:55:30.203 - E: PLEXTOR DVDR PX-760A : Queue again later

18:56:03 #35 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 3072 (C00h), length 0 blocks

18:56:03 #36 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:56:03 #37 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 3071

18:56:07 #38 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out

18:56:57 #39 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 6x (8.310 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Okay... I still have problems burning DVDs... I tried to burn a DVD+R and the "Reset occurred" again! Here is the log:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.05 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 2 ID 4 DMA: Off
DiskPeripheral : SAMSUNG SP1614C SW10 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viamraid Port 4 ID 2 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 145MB (149500kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.12.2006
ISO compilation
14:40:26 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:40:26 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

14:40:26 #3 Text 0 File Reader.cpp, Line 124
Reader running

14:40:26 #4 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running

14:40:26 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

14:40:26 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

14:40:27 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 29663 ( 6:35.38, 57MB)

14:40:27 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

14:40:27 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

14:40:27 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:40:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 29664 (29664) = #29664/6:35.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 29664 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

14:40:27 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 60751872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
29664 | lead-out | 1 | 0x41 | 0x00

14:40:27 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:40:27 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

14:40:27 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

14:40:27 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

14:40:27 #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8.310 KB/s)

14:40:27 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:40:27 #19 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.?_......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

14:40:27 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

14:40:28 #21 Text 0 File Cdrdrv.cpp, Line 1197
14:40:28.953 - E: PLEXTOR DVDR PX-760A : Queue again later

14:40:49 #22 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04f10000: Len x10000
0xFD 75 69 73 BF 10 19 A2 71 C6 3E 9F DE 3F B1 86
0x9B D8 9E AD 95 3D D4 B5 86 E6 B0 D4 77 12 1E 20
0xBA 6A 67 B7 F3 51 1B D2 C0 A9 BB 58 18 5C 48 70

14:40:52 #23 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0572d000: Len x10000
0xFD 75 69 73 BF 10 19 A2 71 C6 3E 9F DE 3F B1 86
0x9B D8 9E AD 95 3D D4 B5 86 E6 B0 D4 77 12 1E 20
0xBA 6A 67 B7 F3 51 1B D2 C0 A9 BB 58 18 5C 48 70

14:40:52 #24 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: PLEXTOR DVDR PX-760A

14:40:53 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:41:10 #26 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8.310 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26.01.2005 01:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

What can I do?

 

Any ideas?

 

Can anyone help again?

 

I can't tell that much about your system, but it appears you have your hard drive and burner on the same port. Do you have a way of putting the burner on a separate channel?

Maybe something about the Promise controller or other controller setup is causing problems.

 

Just because I like repeating myself, once again...Update your Nero from here http://www.filehippo.com/download_nero_7_premium/

DMA needs to be on, heres a guide to turn back on

http://forums.afterdawn.com/thread_view.cfm/260038

 

I assume you have the 760SA?

Maybe some ideas here:

http://plextor.com/english/support/px-760sa motherboard compatability listing.html

http://club.cdfreaks.com/showthread.php?t=195240&highlight=760SA

http://club.cdfreaks.com/showthread.php?t=196165&highlight=760SA

 

@MysticE,

The log shows that it is a

A different burner I believe!!

 

Hello all!

Thanks for the replies!

I have two Serail ATA ports and two Raid Serial ATA ports. Can I use the Raid Serial ATA ports? I have an English manual, but as I understand it , the ports are only for hard drives, aren't they?

What do you mean with Promise controller? I'm not an expert in computer hardware.

Sorry, I know that an Nero update is an option. However, my internet connection (56K modem) and my old laptop (where the modem is inside; I can continusely use the laptop only for a maximum of 1 hour before it will be to hot and turns off. ) hinder me to download large files... I will try this from a friends computer...when he and I have time!



I like to repeat myself again as well... (1. and 5. post) I already know this thread and tried it, but it did not funtion!

Ohh, sorry... Yes my drive is a 760SA. I did not notice my error here.
Thanks! I will check your threads.

I don't understand why the log shows that???

 

If the Promise Raid Console is an external device, you might try disconnecting it. I thought it was probably a controller card. If it is a controller, are the 2 drives attached to it?

Since I don't have 2 devices connected to my SATA connector, I can't tell how the ports are numbered. As far as I know, you can only put one device on one SATA connector, so yours is probably correct for your configuration.

Did you install any of the software that came with the Plextor? It seems to have some technology that might be doing some of the same things as Nero.

I don't see a SA version of the Burner mentioned, but it might be sold in Europe or somewhere else.

http://www.plextor.com/english/products/DriveComparison.htm

 

What is the Promise Raid Console? Do you mean this from my last log? As I said I'm an "idiot" in hardware...

=== Scsi-Device-Map ===
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 2 ID 4 DMA: Off
DiskPeripheral : SAMSUNG SP1614C SW10 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A 1.05 viamraid Port 4 ID 2 DMA: Off

My two devices - the hard drive and the DVD recorder - are attached on two different Serial ATA connectors (SATA1 and SATA2) on my Motherboard (Asus A8V Deluxe).

I installed Plextor Tools, yes. Really? OK, I check this. However, I need some time to do this...

The SA version is sold here.