Hey everyone, Every disk im burning right now, shows up like this: http://img19.imageshack.us/img19/7241/rawrtg4.jpg There is that little circle line there, and the DVD is at least 3g. When I try to play it, it freezes up. Does anybody know if this is a program problem, Burner hardware problem, or the DVD Disk itself? This just started happening when i switched to a new spindle of DVDs, but 1 out of 4 or so would work. [/url]
Hi tydytao Might just be the discs themselves. Which brand are you using like Sony +R 16x? To rule out the burner a couple of things to try: °If you have another burner - try that one and see if you have the same problem. °Try another brand of media - like Verbatim or made in Japan Sony, Fuji or Maxell.
Hello Binkie, This is a WINDATA DVD. The spindle i used before was also Windata, but the top of it wasnt the same. I dont have another burner, nor any other disks ATM. I wanted to find out what it can be before i go out and buy something. Thank you for the help.
Not a problem there tydytao Windata uses different manufacturers some good some bad so this batch may be made by one of the iffy manufacturers. Can be hit or miss on who you get so try the ones listed above.
hello again, I just tried burning something else, after a couple days, and this error message turned up. is this related to my problem or is it something else? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 2, 3, 2 Recorder: <_NEC DVD+RW ND-1100A> Version: 1.90 - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 2 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 2 ID 1 DMA: On DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 DMA: On DiskPeripheral : ST3160023A atapi Port 3 ID 1 DMA: On CdRomPeripheral : FK2731M UYC185I 2.0B vaxscsi Port 4 ID 0 DMA: Off CdRomPeripheral : GE3049V AYF305C 1.0 dtscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG DVD-ROM SD-616T E: CDRom0 _NEC DVD+RW ND-1100A F: CDRom1 FK2731M UYC185I G: CDRom2 GE3049V AYF305C I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1046956kB) Free physical memory: 576MB (590428kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.12.2006 NeroAPI 3:11:50 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 3:11:50 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 3:11:50 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:11:50 PM #4 SPTI -1065 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03cc9e00: Len x6 3:11:50 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 3:11:50 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 3:11:50 PM #7 Text 0 File Writer.cpp, Line 113 Writer F: _NEC DVD+RW ND-1100A running 3:11:50 PM #8 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 3:11:50 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:11:50 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:11:50 PM #11 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 3:11:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 3:11:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO 3:11:51 PM #14 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R 3:11:51 PM #15 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:11:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: _NEC DVD+RW ND-1100A] -------------------------------------------------------------- 3:11:51 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: _NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 3:11:51 PM #18 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:11:51 PM #19 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:11:51 PM #20 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:11:51 PM #21 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 3:11:51 PM #22 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:11:51 PM #23 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 2.4x (3,324 KB/s) 3:11:51 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:11:51 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x03cd4600: Len x804 3:11:51 PM #26 SPTI -1065 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03cc9e00: Len x6 3:11:51 PM #27 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 3:17:50 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 08 55 A0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x00bc0000: Len x10000 0x00 00 01 BA 44 37 AC D0 DC 6B 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 7B 48 07 D1 D7 41 F6 BA 85 0x8B 3E D2 88 6D 4D 30 F0 91 32 9B 2F C4 71 04 EB 3:17:50 PM #29 CDR -1135 File Writer.cpp, Line 302 Write error F: _NEC DVD+RW ND-1100A 3:17:50 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:17:50 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:17:51 PM #32 SPTI -1135 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 3:17:51 PM #33 SPTI -1176 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03 3:17:51 PM #34 SPTI -1065 File SCSIPassThrough.cpp, Line 291 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03cc9e00: Len x6 3:17:51 PM #35 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error F: _NEC DVD+RW ND-1100A 3:17:51 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 3:17:51 PM #37 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 2.4x (3,324 KB/s) 3:17:51 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 3:17:51 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:00:00 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 2:16:52 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi tydytao May be related. Your NEC is an older one but it can use a firmware update so let's try that 1st. The latest is 1.93. The log only show the media as +R - still using the Windata or which ones are you using? Nero API version: 7.2.3.2 Nero can use an update too - the latest is 7.5.0.9a. May or may not help this issue but 7.5.0.9a is a better version. File 'Drivers\CDRALW2K.SYS Nero and Roxio don't always play well so if the above fails may want to uninstall it and run the zap tool. Give that a go and keep us posted.
I'm still using the same media. I'll update the Nero version. Thanks. I also ran the Roxio Zap. It's been uninstalled for a while. Thanks, i'll post back after i try more burnings. Hi tydytao The log only show the media as +R - still using the Windata or which ones are you using? Nero API version: 7.2.3.2 Nero can use an update too - the latest is 7.5.0.9a. May or may not help this issue but 7.5.0.9a is a better version. File 'Drivers\CDRALW2K.SYS Nero and Roxio don't always play well so if the above fails may want to uninstall it and run the zap tool. Give that a go and keep us posted.
Ok - since it's been uninstalled then the zap tool should just rid of that Roxio driver shown in the log. Let's us know how it goes. edit to add: Update the firmware for the burner too.
Alright I just tried a different media, the only other one i have. It's a Hypermedia DVD+RW It looks like the same type of error comming up: Is media still a possibility of the problem? Or is it more torwards my Drive now?
Well neither Kypermedia or Windata are great but combined w/ this being an older burner - only supports +R at 4x & +RW at 2.4x I'd get a new one. Good ones are so much cheaper now. Newer drives support all format like +/- R/RW and -/+ R Dual Layer going to a max burn speed of 18x depending on the format. In this new log you're also getting this - Reset occurred & KEY_UNIT_ATTENTION o it's probably on it's last legs and might just be the reason you have those rings in the ones that did burn. At some point update Nero to the latest version. But 1st do a clean install - looks like you still have some of Nero 6 left Using interface version: 6.3.1.4 Uninstall Nero, run the Clean Tool. Reboot. Now run a registry cleaner like the free ccleaner. Use the issues and cleaner options. Reinstall Nero. Until you get another drive may want to also give ImgBurn a try. It's free. To burn these dvd's use the build mode and add the files or video_ts folder.
Good burners would be LiteOn, Plextor (most expensive), Pioneer or another NEC. If you're in the US check out newegg.com - all but the Plextor can be had for around $30-$35.
Not a problem tydytao Keep us posted or if you need some more help picking out a drive just let us know!
And MOST of all get yourself some decent media. Taiyo Yudens , Verbatims, Made in Japan Sonys, Maxells.
alright garmoon. I'm a little on the poor side, so i stay away from the expensive brands Binkie-i'm looking torwards LiteOn. What's the difference between lightscribe drives and non lightscribe drives?
Actually tydytao the good stuff is just as much as the bad stuff Best Buy has Verbatim on sale 50 for 12.99. But for your current burner I wouldn't use them cause they're usually 16x and may be hit or miss on your burner. A new one different story. LighScribe just means it will etch a picture/image on lightscribe media which is more then 'regular' media. I have it on 1 drive but have never used it. I prefer the inkjet printable discs that I use an Epson to on. Which model #'s were you looking at?
Hmm really. Ive never seen much DVDs 50 for 12.99. I'll give it a look, thanks. I was looking at SOHW-1673SU EZ Dub and the LH-20A1H. I'm more torwards the LH-20A1H Do internal drives work better than external drive or vice versa?
Internal and external are about the same. Just have more flexiblity like moving the external to a different pc. Wow- now that's the 1st I've seen an 20x burner! Personally I would look at 18x or 16x ones - 20x is brand new to the market and may still need a little work. I could be off base her though. Yeah on the media just check the weekly sales - usually something good on sale for good prices. I buy most of media online Taiyo Yuden (best) from supermediastore.com but when the Verbatim's go on sale pick up a pack of those 2.
