burning speed issues

i have nero burner 6 and my comp has a pentium 4 processor 3.00ghz and 512 mb of ram. my issue is when burning a film to back up my collection from my hard drive it often takes over 4 hours to put on disc. i have no idea what i am doing wrong as i havent changed anything but it was quicker than this when i first used it. any help with resolving this will be gratefully recieved. am new to this so please be clear if i have to make any changes. thank you everyone in advance

 

Can you post a Nero Burn Log? Nero makes a copy every time you burn.

They are usually located in
C:\Program Files\Ahead\Nero\NeroHistory.log.

That will probably tell us exactly whats wrong.

If you post a log, be sure to remove your Nero serial number from the log. It will be near the top and start with 1a23 or something similar. Also you only need to post one log, preferrably the last one you did that had the problem.

 

hope this will be of some help its got me baffled thanks
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 158MB (162024kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2005
NeroAPI
15:13:47 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

15:13:47 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

15:13:47 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

15:13:48 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:13:48 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:13:48 #6 Text 0 File Reader.cpp, Line 118
Reader running

15:13:48 #7 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

15:13:48 #8 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

15:13:48 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

15:13:48 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

15:13:48 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

15:14:22 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2269087 (504:14.37, 4431MB)

15:14:22 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

15:14:22 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

15:14:22 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

15:14:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2269088 (2269088) = #2269088/504:14.38
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269088 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

15:14:22 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4647092224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2269088 | lead-out | 1 | 0x00 | 0x41

15:14:22 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

15:14:22 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

15:14:22 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

15:14:22 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

15:14:22 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:14:22 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

15:14:22 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

15:14:22 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

15:14:22 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:14:22 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:14:22 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:14:22 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:14:22 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

15:14:24 #31 Text 0 File Cdrdrv.cpp, Line 1294
15:14:24.375 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

15:42:15 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2269088 (229FA0h), lenght 0 blocks

15:42:15 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

15:42:16 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2269087

15:42:50 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:42:50 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

15:42:50 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

15:42:51 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

15:42:51 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[08.07.2005]------------------------------------
15:13:48 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 163MB (167896kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2005
NeroAPI
16:24:28 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

16:24:28 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

16:24:28 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

16:24:28 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:24:28 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:24:29 #6 Text 0 File Reader.cpp, Line 118
Reader running

16:24:29 #7 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

16:24:29 #8 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

16:24:29 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

16:24:29 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

16:24:29 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

16:25:35 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1571807 (349:17.32, 3069MB)

16:25:35 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

16:25:35 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

16:25:35 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

16:25:35 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1571808 (1571808) = #1571808/349:17.33
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1571808 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

16:25:35 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3219062784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1571808 | lead-out | 1 | 0x00 | 0x41

16:25:35 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

16:25:35 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

16:25:35 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

16:25:35 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

16:25:35 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:25:35 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

16:25:35 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

16:25:35 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

16:25:35 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:25:35 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:25:35 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:25:35 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:25:35 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

16:25:36 #31 Text 0 File Cdrdrv.cpp, Line 1294
16:25:36.953 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

16:45:08 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 1571808 (17FBE0h), lenght 0 blocks

16:45:08 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:45:08 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 1571807

16:45:43 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:45:43 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

16:45:43 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

16:45:44 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

16:45:44 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[08.07.2005]------------------------------------
16:24:28 Robot error messages from:
====== *** NeroAPI, History File *** ======
tits
home
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 304MB (311916kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.7.2005
===== Disc-Copy over image - 1st step : Copy to image ...

19:01:02 #1 Text 0 File Reader.cpp, Line 118
Reader running

19:01:02 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

19:01:02 #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2269360 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

19:01:02 #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2269360 = 2269360, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

19:01:02 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

19:01:02 #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2269359 (504:18.09, 4432MB)

19:01:02 #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

19:01:02 #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

19:01:02 #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:01:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2269360 (2269360) = #2269360/504:18.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269360 blocks [ Image Recorder ]
--------------------------------------------------------------

19:01:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4647956480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2269360 | lead-out | 1 | 0x00 | 0x41

19:01:02 #12 Phase 120 File dlgbrnst.cpp, Line 1845
Creating the image for burning

19:01:02 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:13:10 #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2269360 (22A0B0h), lenght 0 blocks

19:13:10 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:13:11 #16 Phase 121 File dlgbrnst.cpp, Line 1845
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

19:13:24 #1 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:13:24 #2 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:13:31 #3 Text 0 File Reader.cpp, Line 118
Reader running

19:13:31 #4 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

19:13:32 #5 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 352989184
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=504:18.10 ( 2269360)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\john\My Documents\TempImage.nrg>

19:13:32 #6 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

19:13:53 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2269359 (504:18.09, 4432MB)

19:13:53 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

19:13:53 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

19:13:53 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

19:13:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2269360 (2269360) = #2269360/504:18.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269360 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

19:13:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4647649280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2269360 | lead-out | 1 | 0x00 | 0x41

19:13:53 #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2x (2,770 KB/s)

19:13:53 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:13:53 #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 28:03,451 (1683451ms) -> OK

19:13:53 #16 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

19:13:53 #17 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

19:13:53 #18 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

19:13:53 #19 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:13:53 #20 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:13:53 #21 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:13:53 #22 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:13:53 #23 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

19:13:55 #24 Text 0 File Cdrdrv.cpp, Line 1294
19:13:55.546 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

19:41:46 #25 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2269360 (22A0B0h), lenght 0 blocks

19:41:46 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:41:46 #27 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2269359

19:42:20 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:42:20 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:42:21 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

19:42:21 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

19:42:21 #32 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.11
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 232MB (237604kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.7.2005
NeroAPI
01:12:03 #1 Text 0 File Reader.cpp, Line 118
Reader running

01:12:03 #2 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

01:12:03 #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

01:12:04 #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

05:05:28 #5 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2338287 (519:37.12, 4566MB)

05:05:28 #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

05:05:28 #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A
Medium not present

05:05:28 #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[12.07.2005]------------------------------------
01:12:03 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.11
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 219MB (224988kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.7.2005
NeroAPI
05:06:18 #1 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

05:06:18 #2 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

05:06:18 #3 Text 0 File Reader.cpp, Line 118
Reader running

05:06:18 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

05:06:18 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

05:06:18 #6 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

05:06:25 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2338287 (519:37.12, 4566MB)

05:06:25 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

05:06:25 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A
Medium not present

05:06:25 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[12.07.2005]------------------------------------
05:06:18 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.11
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 137MB (141000kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.7.2005
NeroAPI
10:48:59 #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

10:49:00 #2 Text 0 File Reader.cpp, Line 118
Reader running

10:49:00 #3 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

10:49:00 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:49:00 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:49:00 #6 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

10:49:01 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1913823 (425:17.48, 3737MB)

10:49:01 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

10:49:01 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

10:49:01 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:49:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1913824 (1913824) = #1913824/425:17.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1913824 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

10:49:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3919511552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1913824 | lead-out | 1 | 0x00 | 0x41

10:49:03 #13 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

10:49:03 #14 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

10:49:03 #15 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

10:49:03 #16 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

10:49:03 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:49:03 #18 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

10:49:03 #19 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

10:49:03 #20 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

10:49:03 #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:49:03 #22 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

10:49:03 #23 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

10:49:08 #24 Text 0 File Cdrdrv.cpp, Line 1294
10:49:08.750 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

11:12:47 #25 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 1913824 (1D33E0h), lenght 0 blocks

11:12:47 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:12:47 #27 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 1913823

11:13:22 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

11:13:22 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

11:13:22 #30 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[12.07.2005]------------------------------------
10:49:00 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 170MB (174564kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.7.2005
NeroAPI
17:45:18 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

17:45:18 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

17:45:18 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

17:45:18 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

17:45:18 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

17:45:18 #6 Text 0 File Reader.cpp, Line 118
Reader running

17:45:18 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

17:45:18 #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

17:45:18 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

17:45:18 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

17:45:18 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

17:45:51 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2228079 (495:07.54, 4351MB)

17:45:51 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

17:45:51 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

17:45:51 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

17:45:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2228080 (2228080) = #2228080/495:7.55
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2228080 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

17:45:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4563107840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2228080 | lead-out | 1 | 0x00 | 0x41

17:45:51 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

17:45:51 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

17:45:51 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

17:45:51 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

17:45:51 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:45:51 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

17:45:51 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

17:45:51 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

17:45:51 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:45:51 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

17:45:51 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

17:45:51 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

17:45:51 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

17:45:53 #31 Text 0 File Cdrdrv.cpp, Line 1294
17:45:53.250 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

18:13:15 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2228080 (21FF70h), lenght 0 blocks

18:13:15 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:13:15 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2228079

18:13:50 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:13:50 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:13:50 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

18:13:51 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

18:13:51 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[13.07.2005]------------------------------------
17:45:18 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 175MB (179900kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.7.2005
NeroAPI
18:39:34 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

18:39:34 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

18:39:34 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

18:39:34 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:39:34 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:39:34 #6 Text 0 File Reader.cpp, Line 118
Reader running

18:39:34 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

18:39:34 #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

18:39:34 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

18:39:34 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

18:39:34 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

18:40:29 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1203983 (267:33.08, 2351MB)

18:40:29 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

18:40:29 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: INFOSM - ART01
Disc Application Code: 64, Disc Physical Code: 193

18:40:29 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

18:40:29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1203984 (1203984) = #1203984/267:33.9
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1203984 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

18:40:29 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2465759232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1203984 | lead-out | 1 | 0x00 | 0x41

18:40:29 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

18:40:29 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

18:40:29 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

18:40:29 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

18:40:29 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:40:29 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

18:40:29 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

18:40:29 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

18:40:29 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:40:29 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:40:29 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:40:29 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:40:29 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

18:40:31 #31 Text 0 File Cdrdrv.cpp, Line 1294
18:40:31.218 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

18:48:10 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 1203984 (125F10h), lenght 0 blocks

18:48:10 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:48:11 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 1203983

18:48:25 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:48:25 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:48:25 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 4x (5,540 KB/s)

18:48:26 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

18:48:26 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[13.07.2005]------------------------------------
18:39:34 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 225MB (230780kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.7.2005
NeroAPI
19:18:51 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

19:18:51 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

19:18:51 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

19:18:51 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:18:51 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:18:51 #6 Text 0 File Reader.cpp, Line 118
Reader running

19:18:51 #7 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

19:18:51 #8 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

19:18:51 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

19:18:51 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

19:18:51 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

19:20:11 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2269087 (504:14.37, 4431MB)

19:20:11 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

19:20:11 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

19:20:11 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

19:20:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2269088 (2269088) = #2269088/504:14.38
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269088 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

19:20:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4647092224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2269088 | lead-out | 1 | 0x00 | 0x41

19:20:11 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

19:20:11 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

19:20:11 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

19:20:11 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

19:20:11 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:20:11 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

19:20:11 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

19:20:11 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

19:20:11 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:20:11 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:20:11 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:20:11 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:20:11 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

19:20:12 #31 Text 0 File Cdrdrv.cpp, Line 1294
19:20:12.937 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

19:48:04 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2269088 (229FA0h), lenght 0 blocks

19:48:04 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:48:04 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2269087

19:48:38 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:48:38 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

19:48:38 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

19:48:39 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

19:48:39 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[13.07.2005]------------------------------------
19:18:51 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 222MB (227916kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.7.2005
NeroAPI
22:34:53 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

22:34:53 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

22:34:53 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

22:34:53 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:34:53 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:34:53 #6 Text 0 File Reader.cpp, Line 118
Reader running

22:34:53 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

22:34:53 #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

22:34:53 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

22:34:54 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

22:34:54 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

22:35:54 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

22:35:54 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

22:35:54 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

22:35:54 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

22:35:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

22:35:54 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41

22:35:54 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

22:35:54 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

22:35:54 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

22:35:54 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

22:35:54 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:35:54 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

22:35:54 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

22:35:54 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

22:35:54 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:35:54 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:35:54 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:35:54 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:35:54 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

22:35:57 #31 Text 0 File Cdrdrv.cpp, Line 1294
22:35:57.546 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

23:04:00 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

23:04:00 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

23:04:00 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2286143

23:04:22 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

23:04:22 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

23:04:22 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

23:04:23 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

23:04:23 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[13.07.2005]------------------------------------
22:34:53 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 217MB (222276kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.7.2005
NeroAPI
18:19:10 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

18:19:10 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

18:19:10 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

18:19:10 #4 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:19:10 #5 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:19:10 #6 Text 0 File Reader.cpp, Line 118
Reader running

18:19:10 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

18:19:10 #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

18:19:10 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

18:19:10 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

18:19:10 #11 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

18:19:38 #12 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 694031 (154:13.56, 1355MB)

18:19:38 #13 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

18:19:38 #14 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

18:19:38 #15 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

18:19:38 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 694032 (694032) = #694032/154:13.57
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 694032 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

18:19:38 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1421377536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
694032 | lead-out | 1 | 0x00 | 0x41

18:19:38 #18 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

18:19:38 #19 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

18:19:38 #20 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

18:19:38 #21 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

18:19:38 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:19:38 #23 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

18:19:38 #24 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

18:19:38 #25 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

18:19:38 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:19:38 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:19:38 #28 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:19:38 #29 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:19:38 #30 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

18:19:39 #31 Text 0 File Cdrdrv.cpp, Line 1294
18:19:39.828 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

18:28:43 #32 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 694032 (A9710h), lenght 0 blocks

18:28:43 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:28:43 #34 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 694031

18:29:11 #35 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:29:11 #36 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

18:29:11 #37 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2x (2,770 KB/s)

18:29:12 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

18:29:12 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[14.07.2005]------------------------------------
18:19:10 Robot error messages from:
====== *** NeroAPI, History File *** ======
tits
home
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 156MB (159948kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.7.2005
ISO compilation
22:35:21 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:35:21 #2 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:35:21 #3 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:35:22 #4 Text 0 File Reader.cpp, Line 118
Reader running

22:35:22 #5 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

22:35:22 #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

22:35:22 #7 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

22:35:49 #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2071599 (460:21.24, 4046MB)

22:35:49 #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

22:35:49 #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

22:35:49 #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

22:35:49 #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2071600 (2071600) = #2071600/460:21.25
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2071600 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

22:35:49 #13 Text 0 File Burncd.cpp, Line 3896
Can only write at 2x (2,770 KB/s) instead of 8x (11,080 KB/s) to current disc.

22:35:58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4242636800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2071600 | lead-out | 1 | 0x00 | 0x41

22:35:59 #15 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

22:36:20 #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

22:36:20 #17 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

22:36:20 #18 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2x (2,770 KB/s)

22:36:20 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:36:20 #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 25:40,664 (1540664ms) -> OK

22:36:20 #21 Text 0 File DVDR.cpp, Line 1899
Recording mode: Sequential Recording Mode

22:36:20 #22 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON

22:36:20 #23 Text 0 File DVDR.cpp, Line 2040
Start write address at LBA 0
DVD high compatibility mode: Yes

22:36:20 #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:36:20 #25 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:36:20 #26 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:36:20 #27 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

22:36:20 #28 Text 0 File DVDR.cpp, Line 4546
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM
Booktype setting not supported for the loaded disc type

22:36:25 #29 Text 0 File Cdrdrv.cpp, Line 1294
22:36:25.000 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

23:01:56 #30 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2071600 (1F9C30h), lenght 0 blocks

23:01:56 #31 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

23:01:56 #32 Text 0 File DVDR.cpp, Line 2282
EndDAO: Last written address was 2071599

23:02:31 #33 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

23:02:31 #34 Text 0 File DVDR.cpp, Line 5231
Booktype counter: 500, Booktype selected in EEPROM, command version 2

23:02:31 #35 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:02:31 #36 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:02:31 #37 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
tits
home
1A20-030E-0300-1349-1215-9547

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.96 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-55GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 290MB (297052kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.7.2005
CD-ROM (ISO)
23:34:28 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

23:34:28 #2 Phase 90 File dlgbrnst.cpp, Line 1845
Buffer Underrun Protection activated

23:34:29 #3 Text 0 File Reader.cpp, Line 118
Reader running

23:34:29 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

23:34:29 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Track-at-once, using CD-R/RW media

23:35:07 #6 Phase 40 File dlgbrnst.cpp, Line 1845
Aborted by user

23:35:07 #7 Text 0 File DlgWaitCD.cpp, Line 245
Disc check failed: Medium not allowed (Wrong CD)

23:35:07 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

23:35:07 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-2510A
Medium not present

23:35:07 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-R. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

 

Oops! you posted two burn logs so you need to edit out the serial number on the second log.

Burn time is about 28 minutes which is correct for 2X burn speed.

What I see here is that Nero was opened at 15:13:47 and completed the burn at 15:42:50.

What is going on before you start Nero?