can any one help???

You dont need to unlock hdd. If you have softmod, DO NOT UNLOCK HDD. Otherwise, your xbox will not boot again.

did you set to use f and g drive?

do you have softmod or hardmod?

 

how do you set to use the drives because it takes so long to move the options i dont know actuall wot buttons to push how do ou change an option

i think its a soft mod not sure but the chip is just clipped onto the board and has got a couple of wires to the board and one to the on/off switch

 

do you problem when using XMBC? is it slow like evox?

Goto settings on Evox, Scan for "use F drive" then hit A button to set "YES" then SAVE.

Then reboot. and go back to settings again. Check for F drive free spaces.

 

no xbmc works fine

is the "use f drive in the hard drive settings?"

 

yes it is in the settings of Evox.

 

ok i went to system utils then to settings/info then down to the sub heading hardrive and should the use f drive option here or do i have to press A on the f drive option

 

in the hard drive sub heading there is no use f drive

 

ok Use F drive is almost at the end in the settings.

 

ok when i seclect it do i have to reboot it from the beginng of evox or can i just reset the xbox?

 

select it and set it to YES then SAVE it and reboot. Then go back to settings and look for f drive Free space

 

omg i finally got to "use f drive" and it said yes already

 

what about the free space? it is in the middle of settings

 

C drive 1.2......sumthing
it says f drive 0
g drive 0
x 732..........
y 726........
z 758...... etc


and on the system info on xbmc it says that thoes drives are unavaliable

 

shit. You need to format the F drive. JUst the F drive. Do not format other drives.

Do you have any autoinstaller disk like Slayer, etc..

 

no i dont. is formating the f drive hard ?

 

I think you have one.
The xbox's hdd already have 5 partitions: C, E, X, Y, Z.
NOw you add the 6th partition (F drive). So you just need to format F partition.

 

if i format it will all the infomatoin be lost and will i have to load on all new stuff like the dashboards and apptications?

 

That is whY I said. Do not format the whole hdd. Just format the partition F only. Then you will be ok.

You need to autoinstaller disk. I'm not sure if XBMC can do it.

 

go back to XBMC then goto settings try to find format option. then list what are in there.

 

theres the sub headings system, autorun, cache, fornt LED and LCD