Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 07:48:21 ahead WinASPI: File 'C:\Program\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 13:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 3 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0100 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L120AVV207-0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B200M0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-504A atapi Port 3 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 3 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off === CDRom-Device-Map === PLEXTOR DVDR PX-504A F: CDRom0 HL-DT-ST DVD-ROM GDR8161B G: CDRom1 TSSTcorp CD/DVDW TS-H552U H: CDRom3 SCSIVAX DVD/CD-ROM I: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 1 BUFE : 0 Physical memory : 1278MB (1309424kB) Free physical memory: 813MB (832516kB) Memory in use : 36 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.8.2006 ISO-kompilering 11:17:16 #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:17:16 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 11:17:16 #3 Text 0 File Reader.cpp, Line 124 Reader running 11:17:16 #4 Text 0 File Writer.cpp, Line 113 Writer H: TSSTcorp CD/DVDW TS-H552U running 11:17:16 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 11:17:16 #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 11:17:16 #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2047967 (455:06.17, 3999MB) 11:17:16 #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD DVD) 11:17:16 #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 11:17:16 #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:17:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2047968 (2047968) = #2047968/455:6.18 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2047968 blocks [H: TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 11:17:16 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [H: TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4194238464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2047968 | lead-out | 1 | 0x41 | 0x00 11:17:16 #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:17:16 #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 11:17:17 #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 11:17:17 #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 11:17:17 #17 Phase 32 File dlgbrnst.cpp, Line 1724 Simulation started at 2x (2 770 KB/s) 11:17:18 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:17:18 #19 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 11:17:18 #20 Text 0 File MMC.cpp, Line 21541 Set BUFE: Super Link -> ON 11:17:18 #21 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 11:17:18 #22 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:17:21 #23 Text 0 File Cdrdrv.cpp, Line 1195 11:17:21.281 - H: TSSTcorp CD/DVDW TS-H552U : Queue again later 11:42:43 #24 Text 0 File WriterStatus.cpp, Line 116 <H: TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2047968 (1F3FE0h), length 0 blocks 11:42:43 #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:42:43 #26 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 2047967 11:43:21 #27 Phase 33 File dlgbrnst.cpp, Line 1724 Simulation completed successfully at 2x (2 770 KB/s) 11:43:23 #28 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 2x (2 770 KB/s) 11:43:23 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:43:23 #30 CDR -1066 File ThreadedTransferInterface.cpp, Line 1753 Invalid field in command H: TSSTcorp CD/DVDW TS-H552U 11:43:23 #31 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1753 Invalid track info 11:43:23 #32 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 2x (2 770 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2005-08-19 03:00:00 File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 07:48:21 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-07-24 19:46:22 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@TNARIPPER, This is NOT so, you can use NeroVision as per my example in this thread http://forums.afterdawn.com/thread_jump.cfm/356114/2104525 @yosal, This original version of Nero7 was buggy, uninstall, run this clean tool,http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then insatll this version, 7.0.8.2 from here http://www.filehippo.com/download_nero_7_premium/?845 in my opinion ALL versions after this one are buggy as well You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
I THINK YOU GUYS R CRAZY ABOUT THE TWO CLASHING, NERO AND ROXIO THAT IS I HAVE THREE PC'S WITH BOTH ON IT NEVER A PROB.
WHAT ISNT SO GWENDOLIN R SAYING THAT WONT WORK? PLEASE TELL ME YOU R. LOL BEEN DOING IT FOR ALONG TIME NOW JUST BECAUSE I HAVE A NEWBIE STATUS DONT MEAN SQUAT. IVE BURNED, RIPPED, AUTHORED THOUSANDS OF MOVIES
gwendolin is using nero to do so, but she to has to convert to dvd format. u cant burn avi to dvd and watch on your tv . thats what the nero does just 1 of many dude
TNARIPPER , First thing, read the forum rules, you do NOT post in caps, combine your replies to one post, dont spread over 4 and lastly, I refute your statement that you have to convert AVI files before you burn with Nero, if you cared to check out my simple guide you would see that no prior conversion is needed. You seem to have a good deal of bad attitude so I will refer this to a mod.
help please - from Gwen?? I posted before about avi files suddenly increasing in size when one is moving things around on Vision Exp. I followed your recent advice, uninstalled, cleaned up, re -installed back to ver 7 0 8 2 and it is still happening. I tried to work on a 1.2GB .avi film file from the net - which plays OK on my screen - and Nero just jumped to 4.8GB and I just can't see how to get round it. I have just now tried a) restarting computer then b) shifting the file to another hard drive and then renaming it - it still is unworkably large. This file is obviously a rip back to SVCD standard from a .mpg DVD - timing is 2h 09 mins - could this be a reason? Brian
Sounds like your video quality setting is set to automatic so it is streching the video to take up the entire disc. Towards the bottom left corner, push the "More" button and select the DVD-Video tab. You can adjust the quality settings from here. Also if set to automatic you should just be able to import another video file and it will automaticly reduce quality to fit everything on the disc.
