Cannot gain access to secret menu

well at least you know this,try it tomorrow,
meanwhie heres what you do:

To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected

If you need drivers go here

http://www.gilsson.com/usb_drivers_download.htm

Follow my advice to step 7. Locate your USB Adapter (port *)

Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.

 

Cheers desb will let you know how i get on, nice one for all the help

 

I would like to say a very big thank you to you all im now up and running
I owe you all one massive beer, again thanks so much

 

Well done

 

Hi all, just got one little niggle. When go onto s*y prem there is a voice over stating what is on the screen. How do i get rid? Thanks

 

press the audio button on the remote and turn it off.

 

Thanks so much, sorry i know i must sound like a pleb! Cheers

 

no problem. once it works.