I'm looking for the settings for MMDS in carlow. I have DM600 -t The correct Ariel, down converter and power supply, I just need the settings or terrestrial.xml can anyone here help?
Go to manual scan and type 234000 or 250000 for the frequency. Set constellation to 64qam and bandwidth to 8mhz. Let all other options at auto, Enable network search, ONIT and BAT and start the scan.
No joy, I get the following:- Done The transponder scan has finished and found 0 New Transponders 0 New TV Services 0 0 new Radios services 0 new Data services 1 transponders with 0 Services scanned.
If I go to "Signalfind" I get the following:- SNR 100% Lock = No AGC 37% Sync = No Ber 0 Region "Unknown" Transponder 226500
Connect the TV output side of the power inserter to the aerial input of your TV and scan for the analogue channels. If you get no mmds channels the aerial is not working or misaligned.
A sat box cannot handle the mmds signal. Beside that sky via satellite is not hacked. A sat box give you not much.
I understand that, but as there is no signal for MMDS, I will have to see what is on offer through the Sat. Someone told me that a DM600 pointing to the right Sat should give me several movie channels with the right CAM installed.
Did you install the mmds aerial by yourself or it is a upc/chorus installation? Check the direction of the mmds aerials in the neighbourhood.
I installed it myself but I'm sure that its lined up right as the guy across the road is pointing the same way, but he is about 5 or 6 mts higher than my house.
It will have to wait until after Xmas now, can't do it now too much to do for Xmas. Will let you know how I get on when I turn the aerial 90 deg. Thanks And Happy Xmas to you.