Clone starview with 0 on display???

Thats it

 

Cheers mate your a legend!!!

Getting quite good at these things now!!!


Have a good one!

 

No problem, maybe you can go around doing them, save us

 

Whats up Giggsy ?

 

hey my box just went off today...... any one help me?? i dont have a clue??

 

Youre in the wrong thread but here you go:

go to this page courtesy of celtic71 http://forums.afterdawn.com/thread_view.cfm/528527#3197503 and to in put codes manually do this To input keys manually :
press menu
press 1570. (this takes you into secret menu)
Press OK on "nagravision"
Make sure your cable provider is listed at top N*L or T***WEST C&W CHO**S ect
Go down to "Key Number" and check its on 00
Go down again to "Key Data" and input the correct keys
Press OK to store
Go back up "Key Number" and change to 01 using the > button on the remote control
Go back down again to "Key Data" and input the correct keys
Press OK to store
Press "Exit" , Check the bottom option and make sure "Key EMU" is On
Press Ok again
Then "Exit and "Exit" again back to the main tv screen
Then go to a paid channel and should update .

 

sc0use ferg celt are you around

 

Yep Martin

 

could you pop here and see if you can throw any light on it please

 

On the way

 

cheers sc0user

 

I have exactly the same problem a 0 at the front of the box and constant rebooting of the box, what the easiest way to fix this?

Also when plugging in the scart lead it shows a scrambled view, this is without the cable wire being in the box.

Any thoughts?

 

hi that was the same problem as me you will find the fix here let us know how you go on

http://forums.afterdawn.com/thread_view.cfm/531363#3216144

 

can i just check the symtops, as soon as i turn this thing on, it just goes straight to a 0 on screen, doenst do anything else at all.

alos am i removing the first cap to confirm that is the problem because i dont understand y we remove it if we only go and put it back?

thanks

N

 

from what i am led to believe removing the c21 it corrects the offset scouser celtic or ferg will no better
i followed the instuctions and it now works fine well apart from the cap the cap that was removed was a 16v i dont think you can get 10v 1000 at maplins but check what voltage of the cap that is in your box

 

hi,

But what about the symtoms are they the same, just a 0 on the front display, none resposive box, will not even attempt to reflash?

thnks

N

 

A reflash wont help , follow the instructions that Martin gave you and you will get it back working

 

Guys i did as instructed and the box is now up and running.

Just like to say thanks to everybody in the forum, without your help i would have been spending another 100 quid or so on a replacement.

N

 

Good to see you sorted