Cloned Starview Fix 11/04/2008

Can someone tell me what the difference is between updating your box with a BIN file as compared to entering codes into Nagravision?

Aslo, with the latest downtime, would I have to update via a BIN file or via Codes.

I see some people here offering BIN files and some offering codes and I'm a little confused as to the method of update.

I have a Clone SV box.

JH

 

You have a clone, therefore, there is no updated firmware available yet to allow autoroll after the latest changes. For now, you will have to continue entering codes manually, until there is a new firmware update.

 

JUST TO LET YOU ALL KNOW OUT THERE IS NO CLONE SAFE STARVIEW 1 FIRMWARE OUT THERE ANYWHERE THERE IS A FAKE FILE RENAMED AS CLONE SAFE THAT IS ALL IT IS THE V4.00 RENAMED AND THE TUT HAS ALSO BEEN EDITED TO BRING THE AUTHOR OF THE NEW FIXED V4.01 DOWN SO YOU ALL KNOW NOW IF YOU USE THIS FILE YOUR BOX WILL DIE IF YOU PUT ON A CLONE BOX

How do you take off the fake firmware V4.00 if you have already put this new fake fixed firmware on a clone starview,

 

just flash it with 2,57 fixed again

i have the new firmware on at the mo, but i have a couple of boxes and have done jtag many times, so i am beta testing, but the more time goes on its looking more like it is going to kill boxes, i have read through some of the symptoms and my box is now "glichy" freezing for less than a second at times, also have noticed that in aspect ratio, it nows has full screen & letterbox, used to have ratios, so can anyone confirm if the genuine new files has this as well

 

Please somebodey help me. I have a starview box which went down on Wednesday night. I have changing the codes but still it is not working. What else can i do for it to work. Please somebody help.
Thank you

 

do a factory reset
then rescan for channels
then turn key emu on
go to ss1 let it update and fail
go in nagravision and enter ALL service provider keys both 00 & 01

 

I,ve the clone fix on begining on this thread and it does work,i installed using the gt loader and turned on emu and pressed 'set default key' came on straight away..

Thanks

pchezuk...

 

nobody is disputing if it works, cos it does but the debate is if it was written for the genuine it will brick you r box, maybe not today maybe not tomorrow but some day soon, unless you are competant at soldering, i would suggest taking it off whilst your box is running, one suggestion would be go back to 2.57, and if your desperarate for codes load it back on to get the code then take it back off.
i will post any news on the firmware that is on my box as soon as it happens, but it is freezing slightly which was one of the symptoms last time,
if you dont know how to jtag, i would recommend taking it off, but it your box and your choice

 

Cheer's for the advice,will turn off for now and risk it for the man utd v arsenal match,was gonna upgrade to box2 anyway but if it goes tits up will let you let know.

thanks
pchezuk...

 

cheers dazzalam.i have just flashed with the old 2.57 fix and will wait for yourself,fergusrb,scouser etc to come up with a proper fix before i do it again

 

Thanx very much working fine

 

Hi there my starviw box(clone) went down on wednesday, when i install the channels its says updating and just stays blank. I have been in nagravision but I need ALL service provider keys both 00 & 01. Can soemone tell me where to get them from or someone tell me them. Thanks in advance

 

Check out the link at the bottom of my post, kept up to date as fast as they are available, you will need to know your current/correct ptovider.

 

do I only enter my own provider which is telewest or ntl and cable aswell

 

Only Telepest

 

if you know which one to enter,you only need enter that 1, if your not sure out in all 3, or try them one at a time, then you will know for future

 

thanks ill give it a try

 

ONCE AGAIN - There is no new firmware update for the clone SV. This file on rapidshare is simply a renamed version of the CryptStar-v1.4 file that was released for the GENUINE SV. How do I know, just from a quick look over the 2 files in a hex editor, they are exactly the same. Also, take a look at the output from running a Linux command, diff, first against 2 obviously different files, the cryptstar bin and the gtrom loader, and then the cryptstar bin and the clone safeautoroll.bin .
The first one tells you that the files are different, the second gives no output because the files are the same;

user@hostname:~/sat_stuff> diff CryptStar-v1.4-Core400.bin GTRom_v4.00.exe
Files CryptStar-v1.4-Core400.bin and GTRom_v4.00.exe differ
user@hostname:~/sat_stuff> diff CryptStar-v1.4-Core400.bin clone\ safeautoroll.bin

YOU HAVE BEEN WARNED: Do not download any new firmware for clone SV until announced here by someone like scouser.
Don't believe me, don't use linux, download Windoze software and see for yourself.