Coolsat 5000 Questions PART 2

I got one posted, but breck has a lot faster access to the site than I do. I can't keep up with him.

 

I had just hooked up the fusion when the fix came out. Guess I will try it tomorrow. don't want to miss the playoff's.

 

The fix for the v/s seem to work. I still get scramble channel on the C/S 5.

 

Yes you did and I think I answered but it got lost somewhere.

The box would'nt accept the cs bins. The error message is WRONG VERION or something like that. I tried with all cs 4/5/6 k bins, so...

Thanks for asking, breck.

 

Is it a Sunsat 5.0 or 6.0?

 

Sunsat v6.0 Magicbox

 

I wanted to see if there were any other 6000 clones that had updates we could try. Haven't found any others.

 

Thanks for the notice, I was wondering why all was fine here but my machine was cutting out more than i was watching.

 

Weekend is approaching

 

SSSSSSSSSSSSSSHHHHHHHHHHHHHHHHHH!!!!!!!!!!! maybe they won't notice.

 

Here is my setting for 148, I did last try last night and still its not working
148:
LNB Power: ON
LNB Type: Single
Frequency: 11.250
22KHz: OFF
Diseqc: 1.0/1.1
Committed: 1
Uncommited : 6

I get all bars green and and scan with blind scan option. Still not Indian chennals.
Please help

 

where can i find the fix or new bin for the freezing issue on the viewsat ultra

 

bindepot.ca

 

not sure if im missing something. is cs5k down? not been here for a while and checked bindepot and they show 'DISCONTINUED' for all cs models! i had 173 working for a while. do i need to do anything else?
thanx

 

Hi gang!! Need more help from anyone please. This has me puzzled. Some of you will know I am having the same problem. For anyone else here we go. I have 3 dual feed lnb's. 2 legacy, 1 old dir. tv lnb. Not sure if it is a legacy. 2 dishes, 1 is a 500 with the legacy lnb's. 1 is an old dir tv dish with the single lnb, at 91 nimiq 1,3. The 500 is at 110,119. That is the dishes. The switches, 2 chieta heavy duty from maxx electronics. From there 2 cables into the house, 1 from each switch. Cables go to 1 v/s ultra 1 to the c/s 5000. Now the settings.
The c/s 5000.
sat 91 nimiq 1,3
Lnb power on
Lnb type single
freq 11250
22 off
diseq 1.0
comm 3
leg off
The 110 and the 119 are the same except, the comitted are 110 2 and 119 1. This post is getting long, sorry. Now the problem, The v/s ultra is set the same way, When the ultra is on a 119 sat chanel the c/s 5 will only get the 119 channels. 91 and 110 come out as unknown network or in the upper right hand corner it will say 119!! If the ultra is on one of the 110 sat channels the c/s will be fine for the 91 and 110 channels BUT for the 119 channels I have to use the power button on the remote, and the 119 channels come in fine. When the ultra is on the 91 sat channels, everything on the c/s 5 works great. I know this was a long post, but bear with me!! When the responses come I will tell you what happened when I got my hands on a v/s extreme!!!!

 

Not sure what button you pushed but the files are on bindepot.

 

Everything looks good but why is comitted 1 and uncommitted 6? Are you using a 8x1 DiSEqC switch? And if not DiSEqC should be 1.0


Let me know i will help

 

Hi Blnk, read back a couple of post please.

 

That sounds like 1 of 2 problems, when a sat locks on a diff number other than your pointed to there is either a power conflict within the lnb or the lnb setting is incorrect causing 1 to dominte the DiSEqC's power. Or your system is not grounded properly and when the stb calls for power the DiSEqC switch has voltage still on the previos lnb causing erratic switching. Either way check your lnb settings and make sure they are correct. If your system is not grounded then ground the system at one simutaneous point in the set-up, such as the switches or grounding blocks. Keep us posted

 

Whats up Bill, how's the wind doing by you?? LOL