coolsat 6000 down

MY coolsat 6000 is still down and I need someone to help me get it up and running again. But I think I may have messed up everything on the box cause I went to channel 8282 and changed all the nagravisions 1,2,3,4. Can someone out there help walk me through the steps needed to reprogram the entire box or maybe send me the new program so that I can download it into my box. Thanks

 

Dish Network 0101

Last Updated: 2007/08/02 7:30 PM PDT

86: 40 0F 21 0F 2D F5 C8 F1 A6 50 C6 DA F1 15 1E CC

96: D6 50 4C 5D 34 A7 38 DE 45 B5 13 FD 27 C5 88 08


Bell ExpressVu 0901

Last Updated: 2007/08/02 4:49 AM PDT

86: 17 62 8C D3 8C 15 A2 70 CD 9E 87 4F D4 9E A6 3E

96: 79 D1 F2 EC 76 60 52 5C E5 24 E1 97 8B BC EC 26


There are the new keys I will the how to below:

1. Either Enter 8282 on your remote, or you can hit the “Mute” button on your remote and then hit the “Exit” button.
2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV.
3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, and then hit the Right Arrow to change slots.
4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.)
5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00)
in this line.
6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line.
7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line.
8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line.
9. Now hit the Exit button.
10. When the next screen pops up asking if you want to save changes, Use your
arrows and select “Yes” and hit the “OK” button.
11. Now, change your channel, and watch TV.



If you have to do and factory reset let me know and I will post the how to.

Good luck

 

hey
I think I have to do a factory reset. Please help me. Thanks.

 

Loading Instructions for Coolsat 6000

C/P THANKS TO FURFACE

Open a new file on your computer and name it FTA files.
First you need to go to the Files Only section in the 6000 Forum

You will need Proloader 2.4 save to FTA file.
http://forums.f2atv.com/showthread.php?t=28159

You will need bin 100 (unzip) the original factory bin. Save to FTA file.
http://forums.f2atv.com/showthread.php?t=35637

You will need the new current active bin which is Bin 145 today.
http://forums.f2atv.com/showthread.php?t=127450

You will need to unzip the 145 Bin file and save in FTA file.
Note the proloader will require the unzipped stb file for it to work.

You now have all the tools to load your receiver and are ready to
Continue;
Loading New File To Coolsat 6000

* Power Off receiver using switch on back of unit & disconnect from TV
* Connect receiver to PC using supplied cable & and plug in AC power cord
* Turn receiver power switch back on.
* Open up Coolsat Pro Loader File
* Using browse option, locate and select **Coolsat 6000-100-STB file

**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%.

TOPCAT'S EXPLANATION> Click HERE

* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the new STB file.

eg. Coolsat 6000-145-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.

* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When Factory Set is complete, return to main menu.
* In main menu select Installation, then Auto Scan. You will then need to select (example) 91.0W Nimiq as the satellite, and then select OK to run the scan.
* Once complete, exit from Main Menu.
* Watch TV J

*Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch is turned OFF!!!
__________________

 

I am going to be gone until tomorrow nite.

Good luck

 

Thanks alot for all your help. I'm going to try this I really hope this works.

Nite Nite

 

HEY BILLO,

If you're out there tonight I still need your help...Still don't have my coolsat running.

I need to know what program to open the bin 100 with.

 

Is it still zipped? If so unzit it and then start following the instructions above.

 

Hey Bill,

My computer (com port 1)is having trouble recognizing the reciever.
The reciever is on and the cable is secure.
Is there parameters on com port 1.
What do you think?

 

Can you assign it to another port?

 

Having the same trouble. And i'm not able to assign it to any other port. only recoginze it in com 1

 

Is it not reconigized when you use the auto detect?

 

Mine does not reconigized when I use the auto detect.
It says, "Connect your receiver and turn it on ..." and I think it's flipping from com1 and com3.

???

 

Ok now it works! The cable wasn't all the way in... dumdass!

I did all the factory resetting and went all good, but still have scramble channels...
Do I need to do anything to the dish settings or motor settings or anything else?

I'm on BEV...

Tks

 

I was using the wrong cable .
Your suppose to use R322 cable.
thanks again

 

After you get the bin installed, put it on a channel and let it set, maybe as long as ten minutes for it to roll the keys. If all the setting are correct it will pick up the new keys.

 

Hey Billo,

Is your coolsat 6000 down again today???????? Do you have the new bin keys?

 

Here's the latest:


Dish Network (0101)

(Last Update: Thu. Aug 16, 2007 4:00 PM EST)

86: BF 0D 6F DA DB 69 4D 31 F5 70 2B 40 A8 F8 28 03

96: 63 75 F2 E9 83 31 B5 6F 33 60 5B 1F 36 2D 48 7D


Bell ExpressVu (0901)

(Last Update: Thu. Aug 16, 2007 7:08 PM EST)

86: 5E 11 CE 7A 0F 82 8D DC 58 E6 27 F6 4B 49 92 CD

96: 4B 1F B2 B8 78 F0 74 CE 9A D1 E0 9E CA 09 41 40

 

i am new to this and hate to ask but i know how to load the bin but how do i load the keys since i cant find the new bin any help would be great thanks

 

Go to channel 8282 - this is the key edit page.

Then go to 1 if you have dish network or 2 for expressvu

You need to edit the 4 lines.
The 10, 11, 20, 21 stay the same - the lines to the right of that need to be changed.

Line 86 = line 10 and 11
Line 96 = line 20 and 21

eg.

86: 17 62 8C D3 8C 15 A2 70 CD 9E 87 4F D4 9E A6 3E

96: 79 D1 F2 EC 76 60 52 5C E5 24 E1 97 8B BC EC 26

is actually

86:
17 62 8C D3 8C 15 A2 70
CD 9E 87 4F D4 9E A6 3E

96:
79 D1 F2 EC 76 60 52 5C
E5 24 E1 97 8B BC EC 26

Just move up and down - left and right to access the correct lines
To enter letters, hit the OK button where you want to change the character and a little screen will open to select the one you want.
For numbers, you can hit the number on your key pad to be quicker.

When the codes are all entered correctly, hit EXIT, then hit SAVE & YES

You will also have to go to MENU>INSTALLATION>AUTOROLL and turn off the autoroll for whatever dish keys you are using. Autoroll right now is changing your codes and scrambling your key.

When the new bin file comes out, you can have the autoroll on.

Hope this helps...