Hello everyone! I am new at this. I had a friend that used to reset my receiver all the time. he moved away and I am trying to do it myself. I have the proloader, the latest files but when I hook up my receiver to my computer via a serial-usb adapter, the proloader does not detect my receiver when i run the auto detect feature. it says: no available com port. Any suggestions? Thank you all!
Loading Instructions for Coolsat 6000 C/P THANKS TO FURFACE Open a new file on your computer and name it FTA files. First you need to go to the Files Only section in the 6000 Forum You will need Proloader 2.4 save to FTA file. http://forums.f2atv.com/showthread.php?t=28159 You will need bin 100 (unzip) the original factory bin. Save to FTA file. http://forums.f2atv.com/showthread.php?t=35637 You will need the new current active bin which is Bin 144 today. http://forums.f2atv.com/showthread.php?t=127450 You will need to unzip the 144 Bin file and save in FTA file. Note the proloader will require the unzipped stb file for it to work. You now have all the tools to load your receiver and are ready to Continue; Loading New File To Coolsat 6000 * Power Off receiver using switch on back of unit & disconnect from TV * Connect receiver to PC using supplied cable & and plug in AC power cord * Turn receiver power switch back on. * Open up Coolsat Pro Loader File * Using browse option, locate and select **Coolsat 6000-100-STB file **This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%. TOPCAT'S EXPLANATION> Click HERE * When complete, power off the receiver. * Disconnect the receiver from PC * Reconnect the receiver to your TV and turn power switch on. * Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK * When factory set is complete (language option screen appears), power off receiver and disconnect from TV. * Reconnect receiver to PC and switch power back on * Open up Coolsat Pro Loader File * Using browse option, locate and select from your folder the new STB file. eg. Coolsat 6000-144-STB Once again, you will see the new files loading to 100% and old files erasing to 100%. * When complete, power off the Coolsat and disconnect from PC * Reconnect to TV and switch power back on. * Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK * When Factory Set is complete, return to main menu. * In main menu select Installation, then Auto Scan. You will then need to select (example) 91.0W Nimiq as the satellite, and then select OK to run the scan. * Once complete, exit from Main Menu. * Watch TV J *Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch is turned OFF!!! __________________