Copy Error

Nero 7 Ultra Edition.
When i try to copy a CD, I get an error.
Something about cannot start disk at once.
Here is the log file.

desgnr

1C82-***serial number removed by creaky***

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 53073H6 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 51023H2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP CD-Writer+ 9100 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S E: CDRom0
HP CD-Writer+ 9100 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 319MB (327656kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.8.2007
===== Disc-Copy over image - 1st step : Copy to image ...

8:45:07 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:45:08 AM #2 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:45:08 AM #3 Phase 48 File dlgbrnst.cpp, Line 1760
Analyzing disc

8:45:09 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1916
The CD is copyrighted

8:45:13 AM #5 Text 0 File CDCopy.cpp, Line 2132
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 148 147 ( 0:03.72)
Track 2: 148 450 ( 0:08.00) 354233 354232 ( 78:45.07)

8:45:13 AM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 298 = 298, data (TRM_DATA_RAW_MODE2, block size 2352)
02. 450 - 354233 = 353783, data (TRM_DATA_RAW_MODE2, block size 2352)

8:45:13 AM #7 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using CD-R/RW media

8:45:13 AM #8 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 354232 ( 78:45.07)

8:45:13 AM #9 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

8:45:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:45:14 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (1 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #0 + 148 (148) = #148/0:1.73
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 148 blocks [Image Recorder]
1: TRM_DATA_MODE2_2336 (2 - Data (mode 2))
2 indices, index0 (302) not provided
original disc pos #450 + 353783 (353783) = #354233/78:43.8
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 353783 blocks [Image Recorder]
--------------------------------------------------------------

8:45:14 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 696128, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 696128 1401600 827838688, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 148 | -2 | 0x00
0 | 1 | 1 | 0x41 | 148 | 148 | 0x00
148 | 2 | 0 | 0x41 | 353783 | 353931 | 0x00
450 | 2 | 1 | 0x41 | 353783 | 354233 | 0x00
354233 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:45:14 AM #13 Phase 120 File dlgbrnst.cpp, Line 1760
Creating the image for burning

8:45:14 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:45:14 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #450): write at #450

8:49:27 AM #16 Text 0 File WriterStatus.cpp, Line 113
<Image Recorder> start writing Lead-Out at LBA 354233 (567B9h), length 0 blocks

8:49:30 AM #17 Phase 121 File dlgbrnst.cpp, Line 1760
Creating Image completed successfully

8:49:37 AM #18 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:49:45 AM #19 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:49:45 AM #20 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed



===== Disc-Copy over image - 2nd step : Burn the image ...

8:49:54 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:49:55 AM #2 Text 0 File Burncd.cpp, Line 3163
LITE-ON DVDRW SOHW-1673S
Buffer underrun protection activated

8:49:57 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x20
Finalized = 1
First/Last Track = 1 / 2
1: ISRC = ''
Blocksize = 2336
TrackMode = 'TRM_DATA_MODE2_2336'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 350400, NextTrackFilePos = 696128
2: ISRC = ''
Blocksize = 2336
TrackMode = 'TRM_DATA_MODE2_2336'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 696128, Index1FilePos = 1401600, NextTrackFilePos = 827838688
CUES:
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\desgnr\My Documents\TempImage.nrg>

8:49:58 AM #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using CD-R/RW media

8:51:35 AM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 354232 ( 78:45.07)

8:51:35 AM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

8:51:35 AM #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: LITE-ON DVDRW SOHW-1673S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

8:51:35 AM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

8:51:35 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (1 - CD-ROM Mode 2/XA, ISO 9660)
2 indices, index0 (150) provided
original disc pos #0 + 148 (148) = #148/0:1.73
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 148 blocks [E: LITE-ON DVDRW SOHW-1673S]
1: TRM_DATA_MODE2_2336 (2 - CD-ROM Mode 2/XA, CD-ROM Mode 1)
2 indices, index0 (302) provided
original disc pos #450 + 353783 (353783) = #354233/78:43.8
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 353783 blocks [E: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------

8:51:35 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 700896, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 700896 1411200 833508816, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 148 | -150 | 0x00
0 | 1 | 1 | 0x41 | 148 | 0 | 0x00
148 | 2 | 0 | 0x41 | 353783 | 148 | 0x00
450 | 2 | 1 | 0x41 | 353783 | 450 | 0x00
354233 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:51:35 AM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:51:35 AM #12 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 48x (7,200 KB/s)

8:51:35 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:51:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #450): write at #450

8:51:35 AM #15 Text 0 File MMC.cpp, Line 17584
StartDAO : CD-Text - Off

8:51:36 AM #16 Text 0 File MMC.cpp, Line 22250
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

8:51:36 AM #17 SPTI -1067 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1067)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x00
CDB Data: 0x5D 00 00 00 00 00 00 00 30 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 26
Buffer x06089780: Len x30
0x41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00
0x41 01 01 21 00 00 02 00 41 02 00 21 00 00 03 49
0x41 02 01 21 00 00 08 00 41 AA 01 34 00 4E 2D 08

8:51:36 AM #18 Text 0 File MMC.cpp, Line 17812
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 03 49
41 02 01 21 00 00 08 00
41 aa 01 34 00 4e 2d 08

8:51:36 AM #19 CDR -1067 File ThreadedTransferInterface.cpp, Line 1785
Invalid field in parameter
E: LITE-ON DVDRW SOHW-1673S

8:51:36 AM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1785
Could not perform start of Disc-at-once

8:51:37 AM #21 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 48x (7,200 KB/s)

8:51:37 AM #22 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:51:39 AM #23 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

8:51:39 AM #24 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)