1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Could Not Perform End Of Disc-At-Once Error

Discussion in 'Nero discussion' started by pactu2121, Nov 6, 2004.

Thread Status:
Not open for further replies.
  1. red0321

    red0321 Member

    Joined:
    Jan 11, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I have the same problem. I'm using memorex dvd-r disk. I tried every thing i read in this forum but I get the same message "could not perform end of disc at once". Could it be that my dvd went bad? I burn disks before. I can read DVDs with it and play movies. It dosen't seem to write to the disk. Her is the log message.
    I dont want to buy anther dvd and still have the same problem.
    Thanks




    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <Lite-On LTN486 48x Max >Version: YD01 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD100BB-75AUA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Lite-On LTN486 48x Max atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-105 E: CDRom0
    Lite-On LTN486 48x Max F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260328kB)
    Free physical memory: 101MB (104240kB)
    Memory in use : 59 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.1.2006
    ISO compilation
    8:39:26 PM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    8:39:27 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    8:39:27 PM #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-105 running

    8:39:27 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:39:28 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:39:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1778207 (395:09.32, 3473MB)

    8:39:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:39:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    8:39:29 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:39:29 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1778208 (1778208) = #1778208/395:9.33
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1778208 blocks [PIONEER DVD-RW DVR-105]
    --------------------------------------------------------------

    8:39:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3641769984, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1778208 | lead-out | 1 | 0x41 | 0x00

    8:39:32 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    8:39:40 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    8:39:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    8:39:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    8:39:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:39:40 PM #17 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode for Multisession

    8:39:40 PM #18 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    8:39:41 PM #19 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:39:41 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:39:43 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
    20:39:43.979 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later

    8:40:46 PM #22 SCSI -1106 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A70000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x73 0x03

    8:40:46 PM #23 CDR -1106 File Writer.cpp, Line 311
    Power calibration error

    8:40:46 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:40:46 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:40:46 PM #26 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 767

    8:40:46 PM #27 Phase 133 File dlgbrnst.cpp, Line 1832
    Writing short lead-out

    8:40:46 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x72 0x04

    8:40:46 PM #29 CDR -1176 File WriterStatus.cpp, Line 167
    Session fixation error

    8:40:46 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    8:40:46 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  2. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    Hi Red0321,

    Your actual error is a 'Power Calibration Error'. You must always go with the first error message that occurs in the log file. As it will cause other errors like a 'Domino effect'. If you do a search on this forum for 'Power Calibration error' you'll see a number of possible causes for this. Such as Poor media, dust on the optical head of the recorder, power fluctuations, old firmware for the recorder, or a defective recorder.

    Hi Rainboxx1,

    You are also getting a Power Calibration Error. And even before the writ the log file indicates that the recorder is unable to determine the MFG of the media, though it is able to determine the type. You could have a firwmare issue or poor media.

    REgards,

    Craig
    Nero Inc
    USA
     
  3. pulsar

    pulsar Active member

    Joined:
    Dec 31, 2003
    Messages:
    2,420
    Likes Received:
    1
    Trophy Points:
    68
    Craig is back, long time no see, Creaky has assumed the role of Nero man, or affectionately called;

    [bold]THE NERO-NATOR!![/bold]
     
  4. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    Sorry about the long absence. Between the Holidays, Release of Nero 7, CES Show, etc...I've been very short on time.

    But in Febuary I plan on coming back strong on this and other forums. I've hired a few new people to help free up some of my time. I'm not quite ready to make a steady presence on this and other forums, but I'm close and expect to be ready come Feb.

    Sorry again to those who have had many questions and issues that needed assistance on. I will do my best not to be away this long again.

    Regards,

    Craig
    Nero Inc
    USA
     
  5. red0321

    red0321 Member

    Joined:
    Jan 11, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I'm starting to think i have a bad dvd burner. I can play movies or read files that i have saved on other dvds but it dosen't want to burn any thing. Any suggestion would help. here is my last log



    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <Lite-On LTN486 48x Max >Version: YD01 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD100BB-75AUA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : Lite-On LTN486 48x Max atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    Lite-On LTN486 48x Max E: CDRom0
    PIONEER DVD-RW DVR-105 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260328kB)
    Free physical memory: 77MB (78932kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.1.2006
    ISO compilation
    10:40:19 PM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:40:20 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    10:40:20 PM #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-105 running

    10:40:20 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:40:21 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:40:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2089551 (464:20.51, 4081MB)

    10:40:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    10:40:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
    Disc Manufacturer: Yi Jha - n 001
    Disc Application Code: 64, Disc Physical Code: 193

    10:40:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:40:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2089552 (2089552) = #2089552/464:20.52
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2089552 blocks [PIONEER DVD-RW DVR-105]
    --------------------------------------------------------------

    10:40:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4279402496, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2089552 | lead-out | 1 | 0x41 | 0x00

    10:40:26 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:40:33 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    10:40:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:40:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    10:40:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:40:33 PM #17 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode for Multisession

    10:40:33 PM #18 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    10:40:33 PM #19 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:40:33 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:40:37 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
    22:40:37.304 - PIONEER DVD-RW DVR-105\H1 T1 : Queue again later

    10:43:13 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07270000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    10:43:13 PM #23 CDR -1135 File Writer.cpp, Line 311
    Write error

    10:43:13 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:43:14 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:43:14 PM #26 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 767

    10:43:14 PM #27 Phase 133 File dlgbrnst.cpp, Line 1832
    Writing short lead-out

    10:43:14 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x72 0x04

    10:43:14 PM #29 CDR -1176 File WriterStatus.cpp, Line 167
    Session fixation error

    10:43:14 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    10:43:14 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 2:46:22 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Is there any way i can test my burner?

    THanks
     
  6. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    I would recommend that you use a different brand of DVD media to see if this resolves your issue. And make sure you have the latest firmware for it, as the log file is indicating a problem with the Media. If that fails, then it is possible that the Recorder needs the optical head to be cleaned, or it needs service.

    Regards,

    Craig
    Nero Inc
    USA
     
  7. ozzie826

    ozzie826 Member

    Joined:
    Mar 25, 2006
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi All

    I had the same problem but i think i found a way to solve this problem download a progame called BUG DOCTOR from ares or limewire then install it and it will search your pc for any errors and sort it out for you i had 120 errors after i downloaded SPYWARE DOCTOR and used that too and now i can copy stuff without the error message

    Hope That Helps
     
  8. JohnGecko

    JohnGecko Member

    Joined:
    Apr 18, 2006
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    It seems I have the same problem, but none of the fixes I have read so far have helped me.

    Have you tried checking your basics ? Yes, I have tried several programs, about 5 different brand dvd's
    Firmware ? Is upto date
    ASPI ? checks fine.
    Disk Defrag ? just did, and also recently reformatted and did all the upgrades for XP SP2
    IDE location ? This is a laptop with only 1 dvd drive and DMA is enabled.
    Jumper settings ? never touched them since bought the computer.
    What type of media are you using ? Verbatim 8x DVD-R, also have on hand Memorex 8X DVD+R, have tried Sony's as well.

    What programs are you using ? Nero 7.0.0.0
    Exactly where are you and what are you doing when your error occurs. Trying to burn ISO files.
    What are your PC's specs ? HP 7360US laptop, P4 3.4 1GB Memory, 100GB hard drive,
    Do you have any Roxio products installed on your PC ? nope.

    Also I tried downloading and using UltraISO and got the same Could Not Perform End Of Disc-At-Once Error.

    Here is my log.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <HL-DT-ST DVDRAM GMA-4080N>Version: 0S35 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GMA-4080N>Version: 0S35 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GMA-4080N atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GMA-4080N D: CDRom0
    Generic DVD-ROM E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047532kB)
    Free physical memory: 422MB (433012kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.4.2006
    Burn DVD Image
    11:43:59 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    11:43:59 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    11:43:59 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: HL-DT-ST DVDRAM GMA-4080N running

    11:43:59 AM #4 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    11:44:41 AM #5 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2219525 (493:13.50, 4335MB)

    11:44:41 AM #6 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD DVD)

    11:44:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: HL-DT-ST DVDRAM GMA-4080N, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    11:44:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.)

    11:44:41 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2219526 (2219526) = #2219526/493:13.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219526 blocks [D: HL-DT-ST DVDRAM GMA-4080N]
    --------------------------------------------------------------

    11:44:41 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [D: HL-DT-ST DVDRAM GMA-4080N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545589248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2219526 | lead-out | 1 | 0x41 | 0x00

    11:44:41 AM #11 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    11:44:42 AM #12 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    11:44:42 AM #13 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    11:44:42 AM #14 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    11:44:42 AM #15 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 8x (11,080 KB/s)

    11:44:42 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:44:42 AM #17 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    11:44:42 AM #18 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Buffer underrun protection -> ON

    11:44:42 AM #19 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:44:42 AM #20 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:45:38 AM #21 Text 0 File Cdrdrv.cpp, Line 1195
    11:45:38.796 - D: HL-DT-ST DVDRAM GMA-4080N : Queue again later

    11:57:44 AM #22 Text 0 File WriterStatus.cpp, Line 116
    <D: HL-DT-ST DVDRAM GMA-4080N> start writing Lead-Out at LBA 2219526 (21DE06h), length 0 blocks

    11:57:44 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:57:44 AM #24 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was 2219519

    11:57:56 AM #25 SPTI -1093 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 3C 30 00 0C 02
    Buffer x0383ac00: Len x20

    11:57:56 AM #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1921
    No seek complete
    D: HL-DT-ST DVDRAM GMA-4080N

    11:57:56 AM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1921
    Could not perform end of Disc-at-once

    11:57:56 AM #28 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was -1

    11:57:57 AM #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    D: HL-DT-ST DVDRAM GMA-4080N

    11:57:57 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    11:57:57 AM #31 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  9. DePhille

    DePhille Member

    Joined:
    Feb 11, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Make sure there aren'tany emuilated drivers (IE: nero and Alchohol 12%).
    That helped for me!

    Grtz, Dephille
     
  10. fexter

    fexter Member

    Joined:
    Sep 24, 2006
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Can anyone help me with this error... here is my log file....


    Thanks!



    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d

    Recorder: <Memorex DVD+R/RW 2.4x8AA>Version: 1.72 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <LG CD-ROM CRD-8521B>Version: 1.03 - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : Memorex DVD+R/RW 2.4x8AA atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LG CD-ROM CRD-8521B atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    Memorex DVD+R/RW 2.4x8AA E: CDRom0
    LG CD-ROM CRD-8521B F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 383MB (392688kB)
    Free physical memory: 100MB (102828kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.9.2006
    UDF/ISO compilation
    9:01:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    9:01:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    9:01:17 PM #3 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    9:01:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    9:01:17 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 56320KB of Memory

    9:01:17 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    9:01:17 PM #7 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+R/RW 2.4x8AA running

    9:01:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    9:01:17 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    9:01:17 PM #10 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    9:01:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    9:01:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    9:01:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: Memorex DVD+R/RW 2.4x8AA, Media type: DVD+R

    9:01:18 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:01:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [Memorex DVD+R/RW 2.4x8AA]
    --------------------------------------------------------------

    9:01:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [Memorex DVD+R/RW 2.4x8AA] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    9:01:18 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:01:18 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:01:18 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    9:01:18 PM #20 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    9:01:18 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    9:01:18 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 2.4x (3,324 KB/s)

    9:01:18 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:01:18 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
    Buffer x04c10600: Len x804

    9:01:18 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24

    9:01:18 PM #26 Text 0 File DVDR.cpp, Line 6328
    Drive: Memorex DVD+R/RW 2.4x8AA
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    9:01:18 PM #27 CDR -1207 File DVDR.cpp, Line 5463
    Book Type automatically set to: DVD-ROM

    9:01:18 PM #28 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:01:49 PM #29 SPTI -1046 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
    Buffer x04660000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:01:49 PM #30 CDR -1046 File Writer.cpp, Line 311
    Illegal disc
    E: Memorex DVD+R/RW 2.4x8AA

    9:01:49 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:01:49 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:01:50 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24

    9:01:50 PM #34 Phase 127 File dlgbrnst.cpp, Line 1685
    Generating DVD high compatibility borders

    9:01:50 PM #35 SPTI -1066 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24

    9:01:50 PM #36 Text 0 File DVDR.cpp, Line 6328
    Drive: Memorex DVD+R/RW 2.4x8AA
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    9:01:50 PM #37 CDR -1066 File WriterStatus.cpp, Line 167
    Invalid field in command
    E: Memorex DVD+R/RW 2.4x8AA

    9:01:50 PM #38 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    9:01:50 PM #39 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  11. brithnoth

    brithnoth Guest

    Me too, Could not perform end of Disc-at-once

    Please help:

    ] NeroVision Log created (Date: 11/19/2006)
    [18:31:05] NeroVision Processors: 1 (Intel)
    [18:31:05] NeroVision OS: Windows XP
    [18:31:07] GCCore Detected DirectX Version: 9.0c
    [18:31:10] ExpressUI Running Nero Vision Version: 4.1.0.4
    [18:31:11] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
    [18:31:11] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
    [18:31:11] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:11] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:11] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:11] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:30] MMTools SourceBuilder: building c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
    [18:31:30] MMTools SourceBuilder: --- used source filters ---
    [18:31:30] MMTools {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
    [18:31:30] MMTools {1B544C20-FD0B-11CE-8C63-00AA0044B51E} - AVI Splitter
    [18:31:30] MMTools {6A08CF80-0E18-11CF-A24D-0020AFD79767} - ACM Wrapper
    [18:31:30] MMTools SourceBuilder: file type AVI - audio
    [18:31:30] MMTools --------------------
    [18:31:30] MMTools SourceBuilder: building c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
    [18:31:31] MMTools SourceBuilder: --- used source filters ---
    [18:31:31] MMTools {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
    [18:31:31] MMTools {1B544C20-FD0B-11CE-8C63-00AA0044B51E} - AVI Splitter
    [18:31:31] MMTools {CF49D4E0-1115-11CE-B03A-0020AF0BA770} - AVI Decompressor
    [18:31:31] MMTools {1643E180-90F5-11CE-97D5-00AA0055595A} - Color Space Converter
    [18:31:31] MMTools SourceBuilder: file type AVI - video
    [18:31:31] MMTools --------------------
    [18:31:31] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
    [18:31:31] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
    [18:31:31] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:31] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:31] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:31] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:32] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
    [18:31:38] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
    [18:31:38] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
    [18:31:38] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:38] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:38] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:38] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:42] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
    [18:31:42] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
    [18:31:42] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:42] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:42] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:42] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
    [18:31:48] ExpressUI Burn process started by user.
    [18:31:48] ExpressUI Destination: RICOH DVD+RW MP5125
    [18:31:48] ExpressUI Directory for temporary files: C:\DOCUME~1\JEFFAN~1\LOCALS~1\Temp
    [18:31:48] ExpressUI Available hard disk space for temporary files: 1251.594 MB
    [18:31:48] ExpressUI ------<Nero Vision Project Information>--------
    [18:31:48] ExpressUI --- Project type: DVD-Video
    [18:31:48] ExpressUI --- Project video options ---
    [18:31:48] ExpressUI Video mode: PAL
    [18:31:48] <---MT---> Aspect ratio: Automatic
    [18:31:48] <---MT---> Quality: Automatic
    [18:31:48] <---MT---> Resolution: Automatic
    [18:31:48] <---MT---> Sample format: Automatic
    [18:31:48] <---MT---> File type: MPEG-2
    [18:31:48] <---MT---> Audio format: Automatic
    [18:31:48] <---MT---> Encoding mode: Fast Encoding (1-Pass)
    [18:31:48] <---MT---> Nero SmartEncoding: Automatic
    [18:31:48] ExpressUI --- Project space information ---
    [18:31:48] ExpressUI Media type: DVD ( bytes maximum capacity)
    [18:31:48] <---MT---> Total space used: 0.00 out of 4.38 GB
    [18:31:48] <---MT---> Space used for menus: 0.4 out of 1024.0 MB
    [18:31:48] ExpressUI --- Project contents ---
    [18:31:48] ExpressUI Sample format: Automatic
    [18:31:48] <---MT---> Audio format: Automatic
    [18:31:48] <---MT---> Encoding mode: Fast Encoding (1-Pass)
    [18:31:48] <---MT---> Number of titles: 1
    [18:31:48] <---MT---> 1. clock (Video Title, 0h 00m 12s)
    [18:31:48] <---MT---> Video mode: PAL
    [18:31:48] <---MT---> Aspect ratio: 4:3
    [18:31:48] <---MT---> Quality: Super long play (1691 kbps)
    [18:31:48] <---MT---> Resolution: 352 x 576 (Half D1)
    [18:31:48] <---MT---> Audio SmartEncoding ratio: 0.0 %
    [18:31:48] <---MT---> Video SmartEncoding ratio: 0.0 %
    [18:31:48] <---MT---> Number of menus: 1
    [18:31:48] <---MT---> - Main menu (1 page)
    [18:31:48] ExpressUI --------<End of Project Information>----------
    [18:31:48] ExpressUI ------Recording Parameters------
    [18:31:48] ExpressUI Book Type: 1
    [18:31:48] ExpressUI Destination Device: RICOH DVD+RW MP5125 (Capabilities: 000AE017)
    [18:31:48] ExpressUI Recording Flags: 12
    [18:31:48] ExpressUI Recording Speed: 0
    [18:31:48] ExpressUI Volume Name: Clock
    [18:31:48] ExpressUI Burn-at-once flag: 0
    [18:31:48] ExpressUI Fast Update allowed: 0
    [18:31:48] ExpressUI --End of recording parameters---
    [18:31:49] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
    [18:31:49] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
    [18:31:49] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:49] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
    [18:31:49] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterApplicationService
    [18:31:49] DVDEngine ..Application service registered...
    [18:31:49] DVDEngine END: IDVDSessionBaseImpl - RegisterApplicationService
    [18:31:49] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback
    [18:31:49] DVDEngine ..Session callback registered...
    [18:31:49] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback
    [18:31:49] DVDEngine BEGIN: IDVDVideoSessionImpl - Prepare
    [18:31:49] DVDEngine **BEGIN: _DVDVideo - Prepare
    [18:31:49] DVDEngine ..VTS_Ns=1...
    [18:31:49] DVDEngine ****BEGIN: _DVDVideoBase - Prepare VMG
    [18:31:49] DVDEngine ...VMGM_VOBS_exist = true
    [18:31:49] DVDEngine ******BEGIN: VMGM_VOBS - Process Create
    [18:31:49] DVDEngine ********BEGIN: _VOBS - Process VOB
    [18:31:49] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
    [18:31:49] DVDEngine ...Duration 400000
    [18:31:49] DVDEngine ..._streamtime_frame_duration is 400000
    [18:31:49] DVDEngine ...This is a still stream
    [18:31:49] DVDEngine ...Stream 0 is 'Video'
    [18:31:49] DVDEngine ...Stream 1 is 'System/Stream'
    [18:31:49] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
    [18:31:49] NeroVision Analyze video stream
    [18:31:49] NeroVision Seg. | frames | weight | volume
    [18:31:49] NeroVision ------+---------+--------+--------
    [18:31:49] NeroVision 0 | 1 | 1 | 1
    [18:31:49] NeroVision ------+---------+--------+--------
    [18:31:49] NeroVision total : 1
    [18:31:49] NeroVision Estimate Size
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision |Stream | Seg. | UnComp.| Duration | Size (KB)
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision | 0 | 0 | 1 | 0.04 | 150
    [18:31:49] NeroVision | 1 | 0 | 0 | 0.04 | 0
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision total data size : 382977 bytes
    [18:31:49] NeroVision multiplexed size : 397312 bytes
    [18:31:49] DVDEngine ********END: _VOBS - Process VOB
    [18:31:49] DVDEngine ******END: VMGM_VOBS - Process Create
    [18:31:49] DVDEngine ****END: _DVDVideoBase - Prepare VMG
    [18:31:49] DVDEngine ****BEGIN: _DVDVideoBase - Prepare VTS#1
    [18:31:49] DVDEngine ...VTSM_VOBS_exist = false
    [18:31:49] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Process Create
    [18:31:49] DVDEngine ********BEGIN: _VOBS - Process VOB
    [18:31:49] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
    [18:31:49] DVDEngine ...Duration 120000000
    [18:31:49] DVDEngine ..._streamtime_frame_duration is 400000
    [18:31:49] DVDEngine ...Stream 0 is 'Video'
    [18:31:49] DVDEngine ...Stream 1 is 'Audio'
    [18:31:49] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
    [18:31:49] NeroVision Analyze video stream
    [18:31:49] NeroVision Seg. | frames | weight | volume
    [18:31:49] NeroVision ------+---------+--------+--------
    [18:31:49] NeroVision 0 | 300 | 1 | 300
    [18:31:49] NeroVision ------+---------+--------+--------
    [18:31:49] NeroVision total : 300
    [18:31:49] NeroVision Estimate Size
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision |Stream | Seg. | UnComp.| Duration | Size (KB)
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision | 0 | 0 | 1 | 12.00 | 2701
    [18:31:49] NeroVision | 1 | 0 | 1 | 12.00 | 288
    [18:31:49] NeroVision +-------+------+--------+----------+---------
    [18:31:49] NeroVision total data size : 3290164 bytes
    [18:31:49] NeroVision multiplexed size : 3473408 bytes
    [18:31:49] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
    [18:31:51] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
    [18:31:51] DVDEngine ********END: _VOBS - Process VOB
    [18:31:51] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
    [18:31:51] DVDEngine ****END: _DVDVideoBase - Prepare VTS#1
    [18:31:51] DVDEngine **END: _DVDVideo - Prepare
    [18:31:51] DVDEngine ..Estimated size=3.77 MB
    [18:31:51] DVDEngine ..Estimated duration=15 sec
    [18:31:51] DVDEngine END: IDVDVideoSessionImpl - Prepare
    [18:31:51] DVDEngine BEGIN: IDVDVideoSessionImpl - CreateVOBs
    [18:31:51] DVDEngine **BEGIN: _DVDVideo - Create
    [18:31:51] DVDEngine ****BEGIN: Create - VMGM_VOBS
    [18:31:51] DVDEngine ******BEGIN: VMGM_VOBS - Process Create
    [18:31:51] DVDEngine ********BEGIN: _VOBS - Process VOB
    [18:31:51] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
    [18:31:51] DVDEngine ...Duration 400000
    [18:31:51] DVDEngine ..._streamtime_frame_duration is 400000
    [18:31:51] DVDEngine ...This is a still stream
    [18:31:51] DVDEngine ...Stream 0 is 'Video'
    [18:31:51] DVDEngine ...Stream 1 is 'System/Stream'
    [18:31:51] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
    [18:31:51] NeroVision Analyze video stream
    [18:31:51] NeroVision Seg. | frames | weight | volume
    [18:31:51] NeroVision ------+---------+--------+--------
    [18:31:51] NeroVision 0 | 1 | 1 | 1
    [18:31:51] NeroVision ------+---------+--------+--------
    [18:31:51] NeroVision total : 1
    [18:31:51] DVDEngine **********BEGIN: IDVDEngineManagerImpl - CreateSubpictureSource
    [18:31:51] DVDEngine **********END: IDVDEngineManagerImpl - CreateSubpictureSource
    [18:31:51] DVDEngine **********BEGIN: CSPU::process()
    [18:31:51] DVDEngine ...'Decoding SubPicture No.' is '0'
    [18:31:51] DVDEngine ..._nLines == 576
    [18:31:51] DVDEngine ...Found 'bottom half' in the bottom field at bit 7368, addr. is 921 (289)
    [18:31:51] DVDEngine ...Detected 'top half' at 1, addr. is 2
    [18:31:51] DVDEngine ...Detected 'bottom half' at 1, addr. is 921
    [18:31:51] DVDEngine ...Lines processed: 576
    [18:31:51] DVDEngine ...processed 1 packs
    [18:31:51] DVDEngine **********END: CSPU::process()
    [18:31:52] DVDEngine ...New VOB 1
    [18:31:52] DVDEngine ..+VOB#1: VOB_IDN=1, SA=0, VOB_V_S_PTM=35465
    [18:31:52] DVDEngine ...New CELL 1
    [18:31:52] DVDEngine ....+Cell#1: C_IDN=1
    [18:31:52] DVDEngine BTNGR1_DSP_TY == 17446446
    [18:31:52] DVDEngine ....|Cell#1: C_IDN=1, [0;65], VOBU_Ns=1, C_PBTM=0s.10
    [18:31:52] DVDEngine ..|VOB#1: VOB_IDN=1, [0;65], C_Ns=1, VOB_V_S_PTM=35465, VOB_V_E_PTM=71465
    [18:31:52] DVDEngine ********END: _VOBS - Process VOB
    [18:31:52] DVDEngine ********BEGIN: VMGM_VOBS - INFORMATION after Create
    [18:31:52] DVDEngine ----------------------------------------------------------------------------------------
    [18:31:52] DVDEngine General information:
    [18:31:52] DVDEngine ..size=66 (132 KB)
    [18:31:52] DVDEngine ..capacity=66 (132 KB)
    [18:31:52] DVDEngine ..max_capacity=524287 (1.00 GB)
    [18:31:52] DVDEngine ..VOB_Ns=1
    [18:31:52] DVDEngine ..C_Ns=1
    [18:31:52] DVDEngine ..VOBU_Ns=1
    [18:31:52] DVDEngine VOB information:
    [18:31:52] DVDEngine ...VOB#1: VOB_IDN=1, [0;65], C_Ns=1, VOB_V_S_PTM=35465, VOB_V_E_PTM=71465
    [18:31:52] DVDEngine .....Cell#1: C_IDN=1, [0;65], VOBU_Ns=1, C_PBTM=0s.10
    [18:31:52] DVDEngine ----------------------------------------------------------------------------------------
    [18:31:52] DVDEngine ********END: VMGM_VOBS - INFORMATION after Create
    [18:31:52] DVDEngine ******END: VMGM_VOBS - Process Create
    [18:31:52] DVDEngine ******BEGIN: VMGM_VOBS - Verify
    [18:31:52] DVDEngine ******END: VMGM_VOBS - Verify
    [18:31:52] DVDEngine ..VMGM_VOBS: size=132 KB (135,168 bytes)
    [18:31:52] DVDEngine ****END: Create - VMGM_VOBS
    [18:31:52] DVDEngine ****BEGIN: Create - VTSTT_VOBS#1
    [18:31:52] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Process Create
    [18:31:52] DVDEngine ********BEGIN: _VOBS - Process VOB
    [18:31:52] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
    [18:31:52] DVDEngine ...Duration 120000000
    [18:31:52] DVDEngine ..._streamtime_frame_duration is 400000
    [18:31:52] DVDEngine ...Stream 0 is 'Video'
    [18:31:52] DVDEngine ...Stream 1 is 'Audio'
    [18:31:52] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
    [18:31:52] NeroVision Analyze video stream
    [18:31:52] NeroVision Seg. | frames | weight | volume
    [18:31:52] NeroVision ------+---------+--------+--------
    [18:31:52] NeroVision 0 | 300 | 1 | 300
    [18:31:52] NeroVision ------+---------+--------+--------
    [18:31:52] NeroVision total : 300
    [18:31:52] NeroVision Set Preview Channel
    [18:31:52] NeroVision Set Preview Channel
    [18:31:52] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
    [18:31:53] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
    [18:31:53] DVDEngine ...New VOB 1
    [18:31:53] DVDEngine ..+VOB#1: VOB_IDN=1, SA=0, VOB_V_S_PTM=27709
    [18:31:53] DVDEngine ...New CELL 1
    [18:31:53] DVDEngine ....+Cell#1: C_IDN=1
    [18:32:04] DVDEngine ....|Cell#1: C_IDN=1, [0;1271], VOBU_Ns=20, C_PBTM=12s.00
    [18:32:04] DVDEngine ..|VOB#1: VOB_IDN=1, [0;1271], C_Ns=1, VOB_V_S_PTM=27709, VOB_V_E_PTM=1107709
    [18:32:05] DVDEngine ********END: _VOBS - Process VOB
    [18:32:05] DVDEngine ********BEGIN: VTSTT_VOBS#1 - INFORMATION after Create
    [18:32:05] DVDEngine ----------------------------------------------------------------------------------------
    [18:32:05] DVDEngine General information:
    [18:32:05] DVDEngine ..size=1272 (2.48 MB)
    [18:32:05] DVDEngine ..capacity=1272 (2.48 MB)
    [18:32:05] DVDEngine ..VOB_Ns=1
    [18:32:05] DVDEngine ..C_Ns=1
    [18:32:05] DVDEngine ..VOBU_Ns=20
    [18:32:05] DVDEngine VOB information:
    [18:32:05] DVDEngine ...VOB#1: VOB_IDN=1, [0;1271], C_Ns=1, VOB_V_S_PTM=27709, VOB_V_E_PTM=1107709
    [18:32:05] DVDEngine .....Cell#1: C_IDN=1, [0;1271], VOBU_Ns=20, C_PBTM=12s.00
    [18:32:05] DVDEngine ----------------------------------------------------------------------------------------
    [18:32:05] DVDEngine ********END: VTSTT_VOBS#1 - INFORMATION after Create
    [18:32:05] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
    [18:32:05] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Verify
    [18:32:05] DVDEngine ******END: VTSTT_VOBS#1 - Verify
    [18:32:05] DVDEngine ..VTSTT_VOBS: size=2.48 MB (2,605,056 bytes)
    [18:32:05] DVDEngine ****END: Create - VTSTT_VOBS#1
    [18:32:05] DVDEngine **END: _DVDVideo - Create
    [18:32:05] DVDEngine END: IDVDVideoSessionImpl - CreateVOBs
    [18:32:05] DVDEngine BEGIN: IDVDVideoSessionImpl - CreateDesc
    [18:32:05] DVDEngine **BEGIN: _DVDVideo - Create
    [18:32:05] DVDEngine ****BEGIN: Create - VTSI#1
    [18:32:05] DVDEngine ******BEGIN: VTSI#1 - Create
    [18:32:05] DVDEngine ...VTSM_VOBS exists = false
    [18:32:05] DVDEngine ...VTSM_PGCI_UT exists = true
    [18:32:05] DVDEngine ...VTS_TMAPT exists = true
    [18:32:05] DVDEngine ...VTSI_MAT created...
    [18:32:05] DVDEngine ...VTS_PTT_SRPT created...
    [18:32:05] DVDEngine ...VTS_PGCIT created...
    [18:32:05] DVDEngine ...VTS_C_ADT created...
    [18:32:05] DVDEngine ...VTS_VOBU_ADMAP created...
    [18:32:05] DVDEngine ...VTSM_PGCI_UT created...
    [18:32:05] DVDEngine ...VTS_TMAPT created...
    [18:32:05] DVDEngine ******END: VTSI#1 - Create
    [18:32:05] DVDEngine ******BEGIN: VTSI#1 - Verify
    [18:32:05] DVDEngine ******END: VTSI#1 - Verify
    [18:32:05] DVDEngine ..VTSI: size=14.0 KB (14,336 bytes)
    [18:32:05] DVDEngine ****END: Create - VTSI#1
    [18:32:05] DVDEngine ****BEGIN: Create - VMGI
    [18:32:05] DVDEngine ******BEGIN: VMGI - Create
    [18:32:05] DVDEngine ...VMGM_VOBS exists = true
    [18:32:05] DVDEngine ...VMGM_PGCI_UT exists = true
    [18:32:05] DVDEngine ...PTL_MAIT exists = false
    [18:32:05] DVDEngine ...TXTDT_MG exists = false
    [18:32:05] DVDEngine ...FP_PGC_exist = true...
    [18:32:05] DVDEngine ...FP_PGC2_exist = false...
    [18:32:05] DVDEngine ...VMGI_MAT created...
    [18:32:05] DVDEngine ...TT_SRPT created...
    [18:32:05] DVDEngine ...VTS_ATRT created...
    [18:32:05] DVDEngine ...VMGM_PGCI_UT created...
    [18:32:05] DVDEngine ...VMGM_C_ADT created...
    [18:32:05] DVDEngine ...VMGM_VOBU_ADMAP created...
    [18:32:05] DVDEngine ******END: VMGI - Create
    [18:32:05] DVDEngine ******BEGIN: VMGI - Verify
    [18:32:05] DVDEngine ******END: VMGI - Verify
    [18:32:05] DVDEngine ..VMGI: size=12.0 KB (12,288 bytes)
    [18:32:05] DVDEngine ****END: Create - VMGI
    [18:32:05] DVDEngine **END: _DVDVideo - Create
    [18:32:05] DVDEngine END: IDVDVideoSessionImpl - CreateDesc
    [18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - GetDiscCaps
    [18:32:05] DVDEngine ..Caps=DSCCAP_VLMNM_UDF | DSCCAP_VLMNM_ISO9660
    [18:32:05] DVDEngine END: IDVDSessionBaseImpl - GetDiscCaps
    [18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - SetLabel
    [18:32:05] DVDEngine Volume name (ISO9660)="C____"
    [18:32:05] DVDEngine END: IDVDSessionBaseImpl - SetLabel
    [18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - SetLabel
    [18:32:05] DVDEngine Volume name (UDF)="Clock"
    [18:32:05] DVDEngine END: IDVDSessionBaseImpl - SetLabel
    [18:32:05] DVDEngine BEGIN: IDVDVideoSessionImpl - GetDiscContent
    [18:32:05] DVDEngine **BEGIN: _DVDVideo - Fill FileSystemDescContainer
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.IFO' (VMGI), location={undefined}, size=12.0 KB (12,288 bytes)
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.VOB' (VMGM_VOBS), location={undefined}, size=132 KB (135,168 bytes)
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.BUP' (VMGI), location={undefined}, size=12.0 KB (12,288 bytes)
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_0.IFO' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_1.VOB' (VTSTT_VOBS), location={undefined}, size=2.48 MB (2,605,056 bytes)
    [18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_0.BUP' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
    [18:32:05] DVDEngine **END: _DVDVideo - Fill FileSystemDescContainer
    [18:32:05] DVDEngine END: IDVDVideoSessionImpl - GetDiscContent
    [18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback
    [18:32:05] DVDEngine ..Session callback unregistered...
    [18:32:05] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback
    [18:32:05] NeroVision DVD-Video files sorted
    [18:32:36] NeroVision Caching of files started
    [18:32:36] NeroVision Caching of files completed
    [18:32:36] NeroVision Burn process started at 2.4x (3,324 KB/s)
    [18:32:36] NeroVision Book Type automatically set to: DVD-ROM
    [18:32:36] DVDEngine BEGIN: VMGM_VOBS - Write
    [18:32:36] DVDEngine ...RBP=0, count=135,168 bytes
    [18:32:36] DVDEngine ...succeeded
    [18:32:36] DVDEngine END: VMGM_VOBS - Write
    [18:32:36] DVDEngine BEGIN: VTSTT_VOBS#1 - Write
    [18:32:36] DVDEngine ...RBP=0, count=2,605,056 bytes
    [18:32:36] DVDEngine ...succeeded
    [18:32:36] DVDEngine END: VTSTT_VOBS#1 - Write
    [18:32:50] NeroVision Illegal disc
    [18:32:50] <---MT---> E: RICOH DVD+RW MP5125
    [18:32:50] NeroVision Generating DVD high compatibility borders
    [18:32:50] NeroVision Invalid field in command
    [18:32:50] <---MT---> E: RICOH DVD+RW MP5125
    [18:32:50] NeroVision Could not perform end of Disc-at-once
    [18:32:50] NeroVision Burn process failed at 2.4x (3,324 KB/s)
    [18:32:54] NeroVision Process information:
    [18:32:54] <---MT---> --------------------
    [18:32:54] <---MT---> Address Version Module name
    [18:32:54] <---MT---> -----------------------------------------------------
    [18:32:54] <---MT---> 0x00330000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCLib.dll
    [18:32:54] <---MT---> 0x003D0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GDIPainter.dll
    [18:32:54] <---MT---> 0x003F0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCDOM.dll
    [18:32:54] <---MT---> 0x00400000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\NeroVision.exe
    [18:32:54] <---MT---> 0x00460000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCCore.dll
    [18:32:54] <---MT---> 0x00500000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCDocBase.dll
    [18:32:54] <---MT---> 0x00730000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\MMTools.dll
    [18:32:54] <---MT---> 0x007C0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCLib.dll
    [18:32:54] <---MT---> 0x007E0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCUIBase.dll
    [18:32:54] <---MT---> 0x012B0000 7.0.46.0 C:\WINDOWS\System32\ImagXpr7.dll
    [18:32:54] <---MT---> 0x01330000 7.0.46.0 C:\WINDOWS\System32\ImagX7.dll
    [18:32:54] <---MT---> 0x01510000 7.0.476.0 C:\WINDOWS\System32\ImagXR7.dll
    [18:32:54] <---MT---> 0x015E0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCFX.DLL
    [18:32:54] <---MT---> 0x01980000 1.1.0.865 C:\Program Files\Nero\Nero 7\Nero Vision\NeVideoFX.dll
    [18:32:54] <---MT---> 0x01BF0000 1.0.0.3 C:\Program Files\Nero\Nero 7\Nero Vision\NeVideoFX.bitmaps
    [18:32:54] <---MT---> 0x023B0000 2.0.1.3030 C:\Program Files\Common Files\Ahead\lib\AdvrCntr2.dll
    [18:32:54] <---MT---> 0x02720000 1.0.0.3 C:\Program Files\Common Files\Ahead\lib\ShellManager.dll
    [18:32:54] <---MT---> 0x028D0000 5.3.1.904 C:\WINDOWS\System32\dxdiagn.dll
    [18:32:54] <---MT---> 0x02F90000 3.9.0.17 C:\Program Files\Common Files\Ahead\lib\GCHW.dll
    [18:32:54] <---MT---> 0x03680000 6.5.1.902 C:\WINDOWS\System32\devenum.dll
    [18:32:54] <---MT---> 0x036B0000 6.5.1.900 C:\WINDOWS\System32\msdmo.dll
    [18:32:54] <---MT---> 0x03910000 2.0.2.14 C:\Program Files\Nero\Nero 7\Core\NeRSDB.dll
    [18:32:54] <---MT---> 0x03930000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\NeroAPI.dll
    [18:32:54] <---MT---> 0x04530000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\CDCopy.dll
    [18:32:54] <---MT---> 0x04660000 1.0.0.18 C:\Program Files\Common Files\Ahead\lib\DriveLocker.dll
    [18:32:54] <---MT---> 0x047B0000 0.0.0.0 C:\WINDOWS\SnoopFreeDll.dll
    [18:32:54] <---MT---> 0x04CD0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCHWCfg.dll
    [18:32:54] <---MT---> 0x04D10000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCLocale.dll
    [18:32:54] <---MT---> 0x04D20000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressDoc.dll
    [18:32:54] <---MT---> 0x05000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\CDROM.DLL
    [18:32:54] <---MT---> 0x05040000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressUI.dll
    [18:32:54] <---MT---> 0x05950000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\DVDUI.dll
    [18:32:54] <---MT---> 0x05980000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\DVDDoc.dll
    [18:32:54] <---MT---> 0x05C50000 3.0.0.0 C:\Program Files\Trust\305KS\Mouse\MOUDL32A.DLL
    [18:32:54] <---MT---> 0x05F10000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\NeroFileDialog.dll
    [18:32:54] <---MT---> 0x060B0000 7.10.3077.0 C:\Program Files\Common Files\Ahead\lib\MFC71U.DLL
    [18:32:54] <---MT---> 0x061C0000 7.30.0.0 C:\Program Files\Common Files\Ahead\lib\BCGCBPRO730u.dll
    [18:32:54] <---MT---> 0x06730000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\MediaLibraryNSE.dll
    [18:32:54] <---MT---> 0x067B0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMDataServices.dll
    [18:32:54] <---MT---> 0x06C90000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMPluginBase.dll
    [18:32:54] <---MT---> 0x06CB0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMCoFoundation.dll
    [18:32:54] <---MT---> 0x06D30000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMVDS.dll
    [18:32:54] <---MT---> 0x06D80000 1.4.2.0 C:\WINDOWS\System32\btwpimif.dll
    [18:32:54] <---MT---> 0x06D90000 1.4.2.0 C:\WINDOWS\System32\btosif.dll
    [18:32:54] <---MT---> 0x06DB0000 2.0.39.0 C:\WINDOWS\System32\CSH.dll
    [18:32:54] <---MT---> 0x06E10000 1.4.2.0 C:\WINDOWS\System32\btneighborhood.dll
    [18:32:54] <---MT---> 0x06EE0000 0.0.0.0 D:\p900\Mobile\auexpext.dll
    [18:32:54] <---MT---> 0x06F40000 0.0.0.0 D:\p900\Mobile\FilGuiLg.dll
    [18:32:54] <---MT---> 0x06F70000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMIndexStoreSvrPS.dll
    [18:32:54] <---MT---> 0x06FA0000 1.4.2.0 C:\WINDOWS\System32\wbtapi.dll
    [18:32:54] <---MT---> 0x070A0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMLogCxx.dll
    [18:32:54] <---MT---> 0x070D0000 10.0.0.3646 C:\WINDOWS\System32\WMASF.DLL
    [18:32:54] <---MT---> 0x07110000 1.4.2.0 C:\WINDOWS\System32\btrez.dll
    [18:32:54] <---MT---> 0x075C0000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\NeroSearch.dll
    [18:32:54] <---MT---> 0x07A50000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMSearch.dll
    [18:32:54] <---MT---> 0x07A90000 1.0.0.0 C:\Program Files\Common Files\Ahead\lib\log4cxx.dll
    [18:32:54] <---MT---> 0x07B50000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMSearchPluginMediaLibrary.dll
    [18:32:54] <---MT---> 0x07BF0000 1.1.0.1 C:\Program Files\Common Files\Ahead\DSFilter\NeResize.ax
    [18:32:54] <---MT---> 0x07C10000 1.0.0.78 C:\Program Files\Common Files\Ahead\DSFilter\NeroVideoProc.ax
    [18:32:54] <---MT---> 0x07C40000 2.0.0.4 C:\Program Files\Common Files\Ahead\DSFilter\NeroFormatConv.ax
    [18:32:54] <---MT---> 0x07D90000 4.1.0.4 C:\Program Files\Common Files\Ahead\lib\GCCapture.ax
    [18:32:54] <---MT---> 0x08090000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCFilter.ax
    [18:32:54] <---MT---> 0x08350000 2.0.2.54 C:\Program Files\Common Files\Ahead\DSFilter\NeVideo.ax
    [18:32:54] <---MT---> 0x086C0000 10.0.0.3646 C:\WINDOWS\System32\WMVCore.DLL
    [18:32:54] <---MT---> 0x08930000 1.0.0.4 C:\Program Files\Common Files\Ahead\DSFilter\NeVideoAnalyzer.ax
    [18:32:54] <---MT---> 0x08E30000 6.5.1.900 C:\WINDOWS\System32\qedit.dll
    [18:32:54] <---MT---> 0x092D0000 5.2.3790.3646 C:\WINDOWS\System32\Audiodev.dll
    [18:32:54] <---MT---> 0x10000000 7.0.0.0 C:\Program Files\Nero\Nero 7\Nero Vision\HDCC.dll
    [18:32:54] <---MT---> 0x15000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\image.dll
    [18:32:54] <---MT---> 0x18000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\ISOFS.dll
    [18:32:54] <---MT---> 0x19000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\MMC.DLL
    [18:32:54] <---MT---> 0x1C200000 6.5.1.900 C:\WINDOWS\System32\qcap.dll
    [18:32:54] <---MT---> 0x1F7B0000 3.520.7713.0 C:\WINDOWS\System32\ODBC32.dll
    [18:32:54] <---MT---> 0x1F850000 3.520.7713.0 C:\WINDOWS\System32\odbcint.dll
    [18:32:54] <---MT---> 0x20000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\NeroErr.dll
    [18:32:54] <---MT---> 0x22000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\newtrf.dll
    [18:32:54] <---MT---> 0x35500000 6.5.1.902 C:\WINDOWS\System32\QUARTZ.dll
    [18:32:54] <---MT---> 0x51000000 5.3.1.904 C:\WINDOWS\System32\DDRAW.dll
    [18:32:54] <---MT---> 0x51080000 5.3.1.904 C:\WINDOWS\System32\dsound.dll
    [18:32:54] <---MT---> 0x582D0000 1.1.1.5 C:\WINDOWS\System32\tssoft32.acm
    [18:32:54] <---MT---> 0x5A500000 5.1.2600.0 C:\WINDOWS\System32\wiashext.dll
    [18:32:54] <---MT---> 0x5AD70000 6.0.2600.0 C:\WINDOWS\system32\uxtheme.dll
    [18:32:54] <---MT---> 0x5B0A0000 5.1.2600.0 C:\WINDOWS\System32\umdmxfrm.dll
    [18:32:54] <---MT---> 0x5CD70000 5.1.2600.0 C:\WINDOWS\System32\serwvdrv.dll
    [18:32:54] <---MT---> 0x69B10000 4.10.9404.0 C:\WINDOWS\System32\msxml4.dll
    [18:32:54] <---MT---> 0x70200000 6.0.2800.1106 C:\WINDOWS\system32\WININET.dll
    [18:32:54] <---MT---> 0x70BD0000 6.0.2800.1106 C:\WINDOWS\system32\SHLWAPI.dll
    [18:32:54] <---MT---> 0x70D00000 5.1.3097.0 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13\gdiplus.dll
    [18:32:54] <---MT---> 0x71000000 6.0.2800.1106 C:\WINDOWS\System32\shdocvw.dll
    [18:32:54] <---MT---> 0x71160000 6.0.2800.1106 C:\WINDOWS\System32\browseui.dll
    [18:32:54] <---MT---> 0x71950000 6.0.2600.0 C:\WINDOWS\WinSxS\X86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\COMCTL32.dll
    [18:32:54] <---MT---> 0x71AA0000 5.1.2600.0 C:\WINDOWS\System32\WS2HELP.dll
    [18:32:54] <---MT---> 0x71AB0000 5.1.2600.0 C:\WINDOWS\System32\WS2_32.dll
    [18:32:54] <---MT---> 0x71AD0000 5.1.2600.0 C:\WINDOWS\System32\wsock32.dll
    [18:32:54] <---MT---> 0x71B20000 5.1.2600.0 C:\WINDOWS\system32\MPR.dll
    [18:32:54] <---MT---> 0x71BF0000 5.1.2600.0 C:\WINDOWS\System32\SAMLIB.dll
    [18:32:54] <---MT---> 0x71C10000 5.1.2600.0 C:\WINDOWS\System32\ntlanman.dll
    [18:32:54] <---MT---> 0x71C20000 5.1.2600.0 C:\WINDOWS\System32\netapi32.dll
    [18:32:54] <---MT---> 0x71C80000 5.1.2600.0 C:\WINDOWS\System32\NETRAP.dll
    [18:32:54] <---MT---> 0x71C90000 5.1.2600.0 C:\WINDOWS\System32\NETUI1.dll
    [18:32:54] <---MT---> 0x71CD0000 5.1.2600.0 C:\WINDOWS\System32\NETUI0.dll
    [18:32:54] <---MT---> 0x72D10000 5.1.2600.0 C:\WINDOWS\System32\msacm32.drv
    [18:32:54] <---MT---> 0x72D20000 5.1.2600.0 C:\WINDOWS\System32\wdmaud.drv
    [18:32:54] <---MT---> 0x73000000 5.1.2600.0 C:\WINDOWS\System32\WINSPOOL.DRV
    [18:32:54] <---MT---> 0x732E0000 5.1.2600.0 C:\WINDOWS\System32\RICHED32.DLL
    [18:32:54] <---MT---> 0x736A0000 5.1.2600.0 C:\WINDOWS\System32\msrle32.dll
    [18:32:54] <---MT---> 0x73B70000 1.3.3.7 C:\WINDOWS\System32\tsd32.dll
    [18:32:54] <---MT---> 0x73BA0000 5.1.2600.0 C:\WINDOWS\System32\sti.dll
    [18:32:54] <---MT---> 0x73BC0000 5.1.2600.0 C:\WINDOWS\System32\DCIMAN32.dll
    [18:32:54] <---MT---> 0x73BD0000 5.1.2600.0 C:\WINDOWS\System32\MSVFW32.dll
    [18:32:54] <---MT---> 0x73D70000 6.0.2600.0 C:\WINDOWS\System32\shgina.dll
    [18:32:54] <---MT---> 0x73DD0000 6.0.4.0 C:\WINDOWS\System32\MFC42.DLL
    [18:32:54] <---MT---> 0x74AD0000 6.0.2600.0 C:\WINDOWS\System32\POWRPROF.dll
    [18:32:54] <---MT---> 0x74AE0000 5.1.2600.0 C:\WINDOWS\System32\CFGMGR32.dll
    [18:32:54] <---MT---> 0x74E30000 5.0.0.0 C:\WINDOWS\System32\RICHED20.dll
    [18:32:54] <---MT---> 0x74ED0000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemsvc.dll
    [18:32:54] <---MT---> 0x74EF0000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemprox.dll
    [18:32:54] <---MT---> 0x75290000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemcomn.dll
    [18:32:54] <---MT---> 0x75690000 5.1.2600.0 C:\WINDOWS\System32\wbem\fastprox.dll
    [18:32:54] <---MT---> 0x75970000 5.1.2600.0 C:\WINDOWS\System32\MSGINA.dll
    [18:32:54] <---MT---> 0x75A70000 5.1.2600.0 C:\WINDOWS\system32\USERENV.dll
    [18:32:54] <---MT---> 0x75F40000 5.1.2600.0 C:\WINDOWS\system32\appHelp.dll
    [18:32:54] <---MT---> 0x75F60000 5.1.2600.0 C:\WINDOWS\System32\drprov.dll
    [18:32:54] <---MT---> 0x75F70000 5.1.2600.0 C:\WINDOWS\System32\davclnt.dll
    [18:32:54] <---MT---> 0x76080000 6.0.8972.0 C:\WINDOWS\System32\MSVCP60.dll
    [18:32:54] <---MT---> 0x762A0000 5.1.2600.0 C:\WINDOWS\system32\MSASN1.dll
    [18:32:54] <---MT---> 0x762C0000 5.131.2600.0 C:\WINDOWS\system32\CRYPT32.dll
    [18:32:54] <---MT---> 0x76360000 5.1.2600.0 C:\WINDOWS\System32\WINSTA.dll
    [18:32:54] <---MT---> 0x76380000 5.1.2600.0 C:\WINDOWS\System32\MSIMG32.dll
    [18:32:54] <---MT---> 0x763B0000 6.0.2600.0 C:\WINDOWS\system32\comdlg32.dll
    [18:32:54] <---MT---> 0x76400000 2.0.2600.0 C:\WINDOWS\System32\msi.dll
    [18:32:54] <---MT---> 0x76600000 5.1.2600.0 C:\WINDOWS\System32\CSCDLL.dll
    [18:32:54] <---MT---> 0x76620000 5.1.2600.0 C:\WINDOWS\System32\cscui.dll
    [18:32:54] <---MT---> 0x76670000 5.1.2600.0 C:\WINDOWS\System32\SETUPAPI.dll
    [18:32:54] <---MT---> 0x76990000 5.1.2600.0 C:\WINDOWS\System32\ntshrui.dll
    [18:32:54] <---MT---> 0x76B20000 6.0.0.9238 C:\WINDOWS\System32\ATL.DLL
    [18:32:54] <---MT---> 0x76B40000 5.1.2600.0 C:\WINDOWS\System32\WINMM.dll
    [18:32:54] <---MT---> 0x76E80000 5.1.2600.0 C:\WINDOWS\System32\rtutils.dll
    [18:32:54] <---MT---> 0x76E90000 5.1.2600.0 C:\WINDOWS\System32\rasman.dll
    [18:32:54] <---MT---> 0x76EB0000 5.1.2600.0 C:\WINDOWS\System32\TAPI32.dll
    [18:32:54] <---MT---> 0x76EE0000 5.1.2600.0 C:\WINDOWS\System32\RASAPI32.dll
    [18:32:54] <---MT---> 0x76F90000 5.1.2600.0 C:\WINDOWS\System32\Secur32.dll
    [18:32:54] <---MT---> 0x76FD0000 3.0.0.4414 C:\WINDOWS\System32\CLBCATQ.DLL
    [18:32:54] <---MT---> 0x77050000 3.0.0.4414 C:\WINDOWS\System32\COMRes.dll
    [18:32:54] <---MT---> 0x77120000 3.50.5014.0 C:\WINDOWS\system32\OLEAUT32.dll
    [18:32:54] <---MT---> 0x771B0000 5.1.2600.115 C:\WINDOWS\system32\ole32.dll
    [18:32:54] <---MT---> 0x773D0000 6.0.2600.0 C:\WINDOWS\system32\SHELL32.dll
    [18:32:54] <---MT---> 0x77BD0000 5.1.2600.0 C:\WINDOWS\System32\midimap.dll
    [18:32:54] <---MT---> 0x77BE0000 5.1.2600.0 C:\WINDOWS\System32\MSACM32.dll
    [18:32:54] <---MT---> 0x77C00000 5.1.2600.0 C:\WINDOWS\system32\VERSION.dll
    [18:32:54] <---MT---> 0x77C10000 6.1.8638.0 C:\WINDOWS\system32\msvcrt.dll
    [18:32:54] <---MT---> 0x77C70000 5.1.2600.0 C:\WINDOWS\system32\GDI32.dll
    [18:32:54] <---MT---> 0x77D40000 5.1.2600.0 C:\WINDOWS\system32\USER32.dll
    [18:32:54] <---MT---> 0x77DD0000 5.1.2600.0 C:\WINDOWS\system32\ADVAPI32.dll
    [18:32:54] <---MT---> 0x77E60000 5.1.2600.0 C:\WINDOWS\system32\kernel32.dll
    [18:32:54] <---MT---> 0x77F50000 5.1.2600.0 C:\WINDOWS\System32\ntdll.dll
    [18:32:54] <---MT---> 0x78000000 5.1.2600.109 C:\WINDOWS\system32\RPCRT4.dll
    [18:32:54] <---MT---> 0x7C140000 7.10.3077.0 C:\WINDOWS\System32\MFC71.DLL
    [18:32:54] <---MT---> 0x7C340000 7.10.3052.4 C:\Program Files\Nero\Nero 7\Nero Vision\MSVCR71.dll
    [18:32:54] <---MT---> 0x7C3A0000 7.10.3077.0 C:\Program Files\Nero\Nero 7\Nero Vision\MSVCP71.dll
    [18:32:54] <---MT---> Book type: 'Automatic'
    [18:32:54] <---MT---> Properties of your project:
    [18:32:54] <---MT---> Aspect ratio: Automatic
    [18:32:54] <---MT---> Video mode: PAL
    [18:32:54] <---MT---> Quality: Automatic
    [18:32:54] <---MT---> Media type: DVD ( bytes maximum capacity)
    [18:32:54] <---MT---> Total space used: 0.00 out of 4.38 GB
    [18:32:54] <---MT---> Space used for menus: 0.4 out of 1024.0 MB
    [18:32:54] <---MT---> Your project contains the following:
    [18:32:54] <---MT---> Sample format: Automatic
    [18:32:54] <---MT---> Audio format: Automatic
    [18:32:54] <---MT---> Encoding mode: Fast Encoding (1-Pass)
    [18:32:54] <---MT---> Number of titles: 1
    [18:32:54] <---MT---> 1. clock (Video Title, 0h 00m 12s)
    [18:32:54] <---MT---> Video mode: PAL
    [18:32:54] <---MT---> Aspect ratio: 4:3
    [18:32:54] <---MT---> Quality: Super long play (1691 kbps)
    [18:32:54] <---MT---> Resolution: 352 x 576 (Half D1)
    [18:32:54] <---MT---> Audio SmartEncoding ratio: 0.0 %
    [18:32:54] <---MT---> Video SmartEncoding ratio: 0.0 %
    [18:32:54] <---MT---> Number of menus: 1
    [18:32:54] <---MT---> - Main menu (1 page)
    [18:32:54] NeroVision 1c82-0010-8011-0000-9359-4045-5044
    [18:32:54] <---MT---> *1c82-0010-8011-0000-9359-4045-5044
    [18:32:54] <---MT---> Windows XP 5.1
    [18:32:54] <---MT---> IA32
    [18:32:54] <---MT---> WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
    [18:32:54] <---MT---> ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
    [18:32:54] <---MT---> NT-SPTI used
    [18:32:54] <---MT---> Nero API version: 7.0.1.2
    [18:32:54] <---MT---> Using interface version: 7.0.0.0
    [18:32:54] <---MT---> Installed in: C:\Program Files\Nero\Nero 7\Core\
    [18:32:54] <---MT---> Application: ahead\NeroVision
    [18:32:54] <---MT---> Internal Version: 7, 0, 1, 2
    [18:32:54] <---MT---> Recorder: <RICOH DVD+RW MP5125> Version: 1.72 - HA 1 TA 0 - 7.0.1.2
    [18:32:54] <---MT---> Adapter driver: <IDE> HA 1
    [18:32:54] <---MT---> Drive buffer : 2048kB
    [18:32:54] <---MT---> Bus Type : default (0) -> ATAPI, detected: ?
    [18:32:54] <---MT---> === Scsi-Device-Map ===
    [18:32:54] <---MT---> CdRomPeripheral : RICOH DVD+RW MP5125 atapi Port 0 ID 0 DMA: On
    [18:32:54] <---MT---> CdRomPeripheral : PIONEER DVD-ROM DVD-104 atapi Port 1 ID 0 DMA: Off
    [18:32:54] <---MT---> DiskPeripheral : Maxtor 92048U8 VA51 ultra Port 2 ID 0 DMA: Off
    [18:32:54] <---MT---> DiskPeripheral : ST380011A 8.01 ultra Port 2 ID 2 DMA: Off
    [18:32:54] <---MT---> === CDRom-Device-Map ===
    [18:32:54] <---MT---> RICOH DVD+RW MP5125 E: CDRom0
    [18:32:54] <---MT---> PIONEER DVD-ROM DVD-104 F: CDRom1
    [18:32:54] <---MT---> =======================
    [18:32:54] <---MT---> AutoRun : 1
    [18:32:54] <---MT---> Excluded drive IDs:
    [18:32:54] <---MT---> WriteBufferSize: 83886080 (0) Byte
    [18:32:54] <---MT---> ShowDrvBufStat : 0
    [18:32:54] <---MT---> BUFE : 0
    [18:32:54] <---MT---> Physical memory : 639MB (654832kB)
    [18:32:54] <---MT---> Free physical memory: 263MB (269728kB)
    [18:32:54] <---MT---> Memory in use : 58 %
    [18:32:54] <---MT---> Uncached PFiles: 0x0
    [18:32:54] <---MT---> Use Inquiry : 1
    [18:32:54] <---MT---> Global Bus Type: default (0)
    [18:32:54] <---MT---> Check supported media : Disabled (0)
    [18:32:54] <---MT---> 19.11.2006
    [18:32:54] <---MT---> NeroAPI
    [18:32:54] <---MT---> 18:32:05 #1 Phase 111 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> DVD-Video files sorted
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #2 Text 0 File ThreadedTransfer.cpp, Line 525
    [18:32:54] <---MT---> ReadBuffer-Pipe got 262144KB of Memory
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #3 Text 0 File Reader.cpp, Line 124
    [18:32:54] <---MT---> Reader running
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #4 Text 0 File Writer.cpp, Line 113
    [18:32:54] <---MT---> Writer E: RICOH DVD+RW MP5125 running
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    [18:32:54] <---MT---> First writeable address = 0 (0x00000000)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    [18:32:54] <---MT---> First writeable address = 0 (0x00000000)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:05 #7 Text 0 File Burncd.cpp, Line 3302
    [18:32:54] <---MT---> Turn on Disc-At-Once, using DVD media
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #8 Text 0 File DlgWaitCD.cpp, Line 279
    [18:32:54] <---MT---> Last possible write address on media: 2295103 (510:01.28, 4482MB)
    [18:32:54] <---MT---> Last address to be written: 1903 ( 0:25.28, 3MB)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #9 Text 0 File DlgWaitCD.cpp, Line 291
    [18:32:54] <---MT---> Write in overburning mode: NO (enabled: CD)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #10 Text 0 File DlgWaitCD.cpp, Line 2578
    [18:32:54] <---MT---> Recorder: RICOH DVD+RW MP5125, Media type: DVD+R
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #11 Text 0 File DlgWaitCD.cpp, Line 458
    [18:32:54] <---MT---> >>> Protocol of DlgWaitCD activities: <<<
    [18:32:54] <---MT---> =========================================
    [18:32:54] <---MT---> Insert empty disc to write to.
    [18:32:54] <---MT---> (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    [18:32:54] <---MT---> Setup items (after recorder preparation)
    [18:32:54] <---MT---> 0: TRM_DATA_MODE1 ()
    [18:32:54] <---MT---> 2 indices, index0 (150) not provided
    [18:32:54] <---MT---> original disc pos #0 + 1904 (1904) = #1904/0:25.29
    [18:32:54] <---MT---> relocatable, disc pos for caching/writing not required/ required, no patch infos
    [18:32:54] <---MT---> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1904 blocks [E: RICOH DVD+RW MP5125]
    [18:32:54] <---MT---> --------------------------------------------------------------
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    [18:32:54] <---MT---> Prepare recorder [E: RICOH DVD+RW MP5125] for write in CUE-sheet-DAO
    [18:32:54] <---MT---> DAO infos:
    [18:32:54] <---MT---> ==========
    [18:32:54] <---MT---> MCN: ""
    [18:32:54] <---MT---> TOCType: 0x00; Session Closed, disc fixated
    [18:32:54] <---MT---> Tracks 1 to 1:
    [18:32:54] <---MT---> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3899392, ISRC ""
    [18:32:54] <---MT---> DAO layout:
    [18:32:54] <---MT---> ===========
    [18:32:54] <---MT---> __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    [18:32:54] <---MT---> 0 | lead-in | 0 | 0x41 | 0x00
    [18:32:54] <---MT---> 0 | 1 | 0 | 0x41 | 0x00
    [18:32:54] <---MT---> 0 | 1 | 1 | 0x41 | 0x00
    [18:32:54] <---MT---> 1904 | lead-out | 1 | 0x41 | 0x00
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #14 Text 0 File SCSIPassThrough.cpp, Line 36
    [18:32:54] <---MT---> SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #15 Phase 24 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> Caching of files started
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #16 Text 0 File Burncd.cpp, Line 4132
    [18:32:54] <---MT---> Cache writing successful.
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #17 Phase 25 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> Caching of files completed
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #18 Phase 36 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> Burn process started at 2.4x (3,324 KB/s)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    [18:32:54] <---MT---> Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    [18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    [18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    [18:32:54] <---MT---> Sense Code: 0x24
    [18:32:54] <---MT---> Sense Qual: 0x00
    [18:32:54] <---MT---> CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    [18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
    [18:32:54] <---MT---> Buffer x06a2f200: Len x804
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    [18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    [18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    [18:32:54] <---MT---> Sense Code: 0x24
    [18:32:54] <---MT---> Sense Qual: 0x00
    [18:32:54] <---MT---> CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
    [18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #22 Text 0 File DVDR.cpp, Line 6192
    [18:32:54] <---MT---> Drive: RICOH DVD+RW MP5125
    [18:32:54] <---MT---> Book Type request [gen]: DVD-ROM, write to EEPROM
    [18:32:54] <---MT---> Changing the Book Type was finished successfully, return code 0
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #23 CDR -1207 File DVDR.cpp, Line 5330
    [18:32:54] <---MT---> Book Type automatically set to: DVD-ROM
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:36 #24 Text 0 File DVDPlusRW.cpp, Line 666
    [18:32:54] <---MT---> Start write address at LBA 0
    [18:32:54] <---MT---> DVD high compatibility mode: Yes
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:49 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 323
    [18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    [18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    [18:32:54] <---MT---> Sense Code: 0x30
    [18:32:54] <---MT---> Sense Qual: 0x05
    [18:32:54] <---MT---> CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    [18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
    [18:32:54] <---MT---> Buffer x02bc0000: Len x10000
    [18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:49 #26 CDR -1046 File Writer.cpp, Line 302
    [18:32:54] <---MT---> Illegal disc
    [18:32:54] <---MT---> E: RICOH DVD+RW MP5125
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #27 Text 0 File ThreadedTransfer.cpp, Line 228
    [18:32:54] <---MT---> all writers idle, stopping conversion
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #28 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    [18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    [18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    [18:32:54] <---MT---> Sense Code: 0x24
    [18:32:54] <---MT---> Sense Qual: 0x00
    [18:32:54] <---MT---> CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    [18:32:54] <---MT---> Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #29 Phase 127 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> Generating DVD high compatibility borders
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #30 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    [18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    [18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    [18:32:54] <---MT---> Sense Code: 0x24
    [18:32:54] <---MT---> Sense Qual: 0x00
    [18:32:54] <---MT---> CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
    [18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #31 Text 0 File DVDR.cpp, Line 6192
    [18:32:54] <---MT---> Drive: RICOH DVD+RW MP5125
    [18:32:54] <---MT---> Book Type request [gen]: DVD+R, write to EEPROM
    [18:32:54] <---MT---> Changing the Book Type was finished successfully, return code 0
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #32 CDR -1066 File WriterStatus.cpp, Line 167
    [18:32:54] <---MT---> Invalid field in command
    [18:32:54] <---MT---> E: RICOH DVD+RW MP5125
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
    [18:32:54] <---MT---> Could not perform end of Disc-at-once
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> 18:32:50 #34 Phase 38 File APIProgress.cpp, Line 278
    [18:32:54] <---MT---> Burn process failed at 2.4x (3,324 KB/s)
    [18:32:54] <---MT--->
    [18:32:54] <---MT---> Existing drivers:
    [18:32:54] <---MT---> File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    [18:32:54] <---MT---> Registry Keys:
    [18:32:54] <---MT---> HKLM\Software\Microsoft\Windows [18:32:54] <---MT---> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  12. nari

    nari Guest

    Hi my name is David, i'm very new to this kind of thing, could someone please help me. i am trying to burn data (or dvd) files onto dvd but i keep getting "could not perform disc at once error" i have tried both dvd and dvd rw. however when burning to cdr it is fine.
    here is my error log. i would appreciate the help.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

    NT-SPTI used
    Nero Version: 7.5.7.0
    Internal Version: 7, 5, 7, 0
    (Nero Express)
    Recorder: <MATSHITA DVD-RAM UJ-831S>Version: 1.41 - HA 1 TA 0 - 7.5.7.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <MATSHITA DVD-RAM UJ-831S >Version: 1.41 - HA 1 TA 0 - 7.5.7.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM UJ-831S atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ-831S D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 72351744 (0) Byte
    BUFE : 0
    Physical memory : 494MB (506736kB)
    Free physical memory: 91MB (94128kB)
    Memory in use : 81 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    29.11.2006
    ISO compilation
    07:46:01 #1 Text 0 File SCSIPassThrough.cpp, Line 583
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    07:46:01 #2 Text 0 File Isodoc.cpp, Line 6508
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    07:46:02 #3 ISO9660GEN -11 File Geniso.cpp, Line 3313
    First writeable address = 0 (0x00000000)

    07:46:02 #4 Text 0 File Burncd.cpp, Line 3435
    Turn on Disc-At-Once, using DVD media

    07:46:02 #5 Text 0 File DlgWaitCD.cpp, Line 301
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 715279 (158:57.04, 1397MB)

    07:46:02 #6 Text 0 File DlgWaitCD.cpp, Line 313
    Write in overburning mode: NO

    07:46:02 #7 Text 0 File DlgWaitCD.cpp, Line 2863
    Recorder: MATSHITA DVD-RAM UJ-831S, Media type: DVD-RW
    Disc Manufacturer: TDK502 - sakuM3
    Disc Application Code: 64, Disc Physical Code: 214

    07:46:02 #8 Text 0 File DlgWaitCD.cpp, Line 485
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    07:46:02 #9 Text 0 File ThreadedTransferInterface.cpp, Line 820
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 715280 (715280) = #715280/158:57.5
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 715280 blocks [Main]
    --------------------------------------------------------------

    07:46:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033
    Prepare recorder [MATSHITA DVD-RAM UJ-831S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1464893440, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 715280 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 715280 | 0 | 0x00
    715280 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    07:46:02 #11 Text 0 File SCSIPassThrough.cpp, Line 41
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    07:46:02 #12 Phase 24 File dlgbrnst.cpp, Line 1746
    Caching of files started

    07:46:02 #13 Text 0 File Burncd.cpp, Line 4262
    Cache writing successful.

    07:46:02 #14 Phase 25 File dlgbrnst.cpp, Line 1746
    Caching of files completed

    07:46:02 #15 Phase 36 File dlgbrnst.cpp, Line 1746
    Burn process started at 2x (2,770 KB/s)

    07:46:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    07:46:02 #17 Text 0 File DVDMinusRW.cpp, Line 261
    Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.

    07:46:02 #18 Phase 136 File dlgbrnst.cpp, Line 1746
    Quick Format DVD-RW

    07:46:27 #19 Phase 65 File dlgbrnst.cpp, Line 1746
    Burn process started

    07:46:27 #20 Text 0 File DVDR.cpp, Line 3026
    Recording mode: Restricted Overwrite Mode

    07:46:27 #21 Text 0 File DVDR.cpp, Line 3182
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    07:46:27 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 293
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x06e3d800: Len x648

    07:46:27 #23 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    07:53:55 #24 SPTI -1 File SCSIPassThrough.cpp, Line 293
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x03
    Sense Qual: 0x01
    CDB Data: 0x2A 00 00 07 B0 60 00 00 20 00 00 00
    Sense Area: 0xF1 00 04 00 07 AD 60 0A 00 38 00 00 03 01
    Buffer x09a30200: Len x10000
    0x0F 9E 0C 3D 1D 8F 8F 1E 4C 16 22 F1 22 29 08 5E
    0xD3 7E 1F 81 B7 67 3D C3 EA BB 6C D7 2F 10 92 AE
    0xE1 E1 2C BD EC D1 84 C4 6D 2E 18 4D B2 53 C4 4F

    07:53:56 #25 CDR -1 File Writer.cpp, Line 278
    Unspecified Recorder Error
    D: MATSHITA DVD-RAM UJ-831S

    07:53:57 #26 Text 0 File DVDR.cpp, Line 3402
    EndDAO: Last written address was 503903

    07:54:01 #27 Phase 133 File dlgbrnst.cpp, Line 1746
    Writing short lead-out

    07:54:01 #28 SPTI -1122 File SCSIPassThrough.cpp, Line 293
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x57
    Sense Qual: 0x00
    CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A FE 00 03 06 57

    07:54:01 #29 CDR -1122 File WriterStatus.cpp, Line 161
    Unable to recover TOC
    D: MATSHITA DVD-RAM UJ-831S

    07:54:01 #30 TRANSFER -24 File WriterStatus.cpp, Line 161
    Could not perform end of Disc-at-once

    07:54:01 #31 Phase 38 File dlgbrnst.cpp, Line 1746
    Burn process failed at 2x (2,770 KB/s)

    07:54:02 #32 Text 0 File Cdrdrv.cpp, Line 10459
    DriveLocker: UnLockVolume completed

    07:54:03 #33 Text 0 File SCSIPassThrough.cpp, Line 583
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  13. luvstruck

    luvstruck Member

    Joined:
    Dec 16, 2006
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    hm...strange...i have the same problem but only with one type of DVDs...TDK DVD+R 1-16x...im finishing the process of recording..and the then the message comes "could not..." bla bla
    if i put Sony DVD as example...everything is ok...but i tryed to record TDK on the same recorder as mine...and its work...so..the problem is not in the DVDs so something software i think...

    here's the log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 &#1075;. 13:54:32

    NT-SPTI used
    Nero Version: 7.5.1.1
    Internal Version: 7, 5, 1, 1

    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A101 - HA 1 TA 0 - 7.5.1.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.5.1.1
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC CD-RW NR-9100A atapi Port 0 ID 1 DMA: On
    DiskPeripheral : Maxtor 6Y080M0 YAR5 viasraid Port 2 ID 0 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4163B E: CDRom0
    _NEC CD-RW NR-9100A F: CDRom1
    Generic DVD-ROM G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523796kB)
    Free physical memory: 175MB (179440kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.12.2006
    ISO compilation
    20:50:43 #1 Text 0 File Isodoc.cpp, Line 6510
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:50:43 #2 Text 0 File ThreadedTransfer.cpp, Line 540
    ReadBuffer-Pipe got 72704KB of Memory

    20:50:43 #3 Text 0 File Reader.cpp, Line 126
    Reader running

    20:50:43 #4 Text 0 File Writer.cpp, Line 123
    Writer E: HL-DT-ST DVDRAM GSA-4163B running

    20:50:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
    First writeable address = 0 (0x00000000)

    20:50:43 #6 Text 0 File Burncd.cpp, Line 3443
    Turn on Disc-At-Once, using DVD media

    20:50:43 #7 Text 0 File DlgWaitCD.cpp, Line 300
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2193631 (487:28.31, 4284MB)

    20:50:43 #8 Text 0 File DlgWaitCD.cpp, Line 312
    Write in overburning mode: NO (enabled: CD)

    20:50:43 #9 Text 0 File DlgWaitCD.cpp, Line 2851
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    20:50:43 #10 Text 0 File DlgWaitCD.cpp, Line 484
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:50:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2193632 (2193632) = #2193632/487:28.32
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2193632 blocks [E: HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    20:50:43 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
    Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4492558336, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 2193632 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2193632 | 0 | 0x00
    2193632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    20:50:43 #13 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    20:50:43 #14 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    20:50:43 #15 Text 0 File Burncd.cpp, Line 4274
    Cache writing successful.

    20:50:43 #16 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    20:50:43 #17 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5 540 KB/s)

    20:50:43 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:50:43 #19 Text 0 File Cdrdrv.cpp, Line 9215
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: M01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

    20:50:43 #20 Text 0 File DVDR.cpp, Line 6099
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    20:50:43 #21 CDR -1207 File DVDR.cpp, Line 6022
    Book Type automatically set to: DVD-ROM

    20:50:43 #22 Text 0 File DVDPlusRW.cpp, Line 662
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:04:39 #23 Text 0 File WriterStatus.cpp, Line 116
    <E: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2193632 (2178E0h), length 0 blocks

    21:04:39 #24 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    21:05:05 #25 SPTI -1194 File SCSIPassThrough.cpp, Line 291
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04

    21:05:07 #26 CDR -1194 File ThreadedTransferInterface.cpp, Line 1959
    PMA update failure
    E: HL-DT-ST DVDRAM GSA-4163B

    21:05:07 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1959
    Could not perform end of Disc-at-once

    21:05:36 #28 SPTI -1194 File SCSIPassThrough.cpp, Line 291
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04

    21:05:36 #29 Phase 127 File dlgbrnst.cpp, Line 1730
    Generating DVD high compatibility borders

    21:05:36 #30 CDR -1194 File WriterStatus.cpp, Line 167
    PMA update failure
    E: HL-DT-ST DVDRAM GSA-4163B

    21:05:36 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    21:05:36 #32 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5 540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 &#1075;. 00:28:13 (Prassi/Veritas driver for win 2K)
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.8.2004 &#1075;. 22:59:42 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Dec 16, 2006
  14. raviolli

    raviolli Member

    Joined:
    Jan 28, 2007
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi there, i have looked through the forum and am having the same problem it happend a while ago, all of a sudden. This is the Log file:

    BB
    TLC
    1C82-0000-19E5-MAAX-4000-4549-****

    Windows XP 5.2
    AMD64
    Wow64Process
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files (x86)\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.5.9.0
    Internal Version: 7, 5, 9, 0

    Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B nvatabus Port 0 ID 0 DMA: Off
    DiskPeripheral : ST3160827AS nvatabus Port 1 ID 0 DMA: Off
    CdRomPeripheral : IX9741L CZK135A 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4160B D: CDRom0
    IX9741L CZK135A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1023MB (1047756kB)
    Free physical memory: 502MB (514196kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.1.2007
    UDF/ISO compilation
    6:55:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:55:18 PM #2 Phase 112 File dlgbrnst.cpp, Line 1746
    DVD-Video files reallocation started

    6:55:18 PM #3 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1294
    Required file 'VIDEO_TS.VOB' is not present

    6:55:18 PM #4 Phase 115 File dlgbrnst.cpp, Line 1746
    DVD-Video files reallocation failed

    6:55:19 PM #5 Phase 132 File dlgbrnst.cpp, Line 1746
    DVD-Video files compliance ignored

    6:55:19 PM #6 Text 0 File Isodoc.cpp, Line 6509
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:55:19 PM #7 Phase 111 File dlgbrnst.cpp, Line 1746
    DVD-Video files sorted

    6:55:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    6:55:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    6:55:19 PM #10 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    6:55:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2294543 (509:53.68, 4481MB)

    6:55:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    6:55:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    6:55:19 PM #14 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:55:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2294544 (2294544) = #2294544/509:53.69
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294544 blocks [D: HL-DT-ST DVDRAM GSA-4160B]
    --------------------------------------------------------------

    6:55:19 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [D: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699226112, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 2294544 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2294544 | 0 | 0x00
    2294544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:55:19 PM #17 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    6:55:19 PM #18 Phase 24 File dlgbrnst.cpp, Line 1746
    Caching of files started

    6:55:19 PM #19 Text 0 File Burncd.cpp, Line 4278
    Cache writing successful.

    6:55:19 PM #20 Phase 25 File dlgbrnst.cpp, Line 1746
    Caching of files completed

    6:55:26 PM #21 Phase 36 File dlgbrnst.cpp, Line 1746
    Burn process started at 4x (5,540 KB/s)

    6:55:26 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:55:26 PM #23 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    6:55:26 PM #24 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:10:13 PM #25 Text 0 File WriterStatus.cpp, Line 113
    <D: HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 2294544 (230310h), length 0 blocks

    7:10:47 PM #26 SPTI -1194 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04

    7:10:49 PM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1920
    PMA update failure
    D: HL-DT-ST DVDRAM GSA-4160B

    7:10:49 PM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920
    Could not perform end of Disc-at-once

    7:11:22 PM #29 SPTI -1194 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04

    7:11:22 PM #30 Phase 127 File dlgbrnst.cpp, Line 1746
    Generating DVD high compatibility borders

    7:11:22 PM #31 CDR -1194 File WriterStatus.cpp, Line 162
    PMA update failure
    D: HL-DT-ST DVDRAM GSA-4160B

    7:11:22 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    7:11:22 PM #33 Phase 38 File dlgbrnst.cpp, Line 1746
    Burn process failed at 4x (5,540 KB/s)

    7:11:22 PM #34 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:11:51 PM #35 SPTI -500 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x00) WinError(995) NeroError(-500)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

    7:11:51 PM #36 SPTI -1114 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
    Sense Area: 0x70 00 06 00 00 00 00 10 00 00 00 00 29

    7:11:51 PM #37 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    7:11:51 PM #38 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    i reinstalled, Nero, i re installed the DVD burner, and i toggeled the Transfer mod from Ultra DMA2 - Ultra 33 too PIO and back and nothing.
    For some reason the burns properly when i use Re writeable DVD's but not normal ones please help
     
  15. habsalot

    habsalot Guest

    Hi all : I would most appreciate some help with this error message. New to burning but have read the previous posts. Did manage to clean out the Roxio pest , have deleted Nero , cleaned it out using the tools and re installed. Defrag a few days ago . Firmware is all updated . Can you please review the error log and add some suggestions. I have also tried diffent media form Maxell to Verbatim , same result.
    Thanks in advance.
    A.R.
    X
    1A20-620E-0012-2525-1283-2378*

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 3/13/2006 10:06:21 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4h
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22N>Version: 1.00 - HA 1 TA 4 - 6.6.1.4
    Adapter driver: <USB 2.0> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-116 >Version: 1.22 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD1200JB-00GVA0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX175A1 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-116 D: CDRom0
    SONY CD-RW CRX175A1 E: CDRom1
    HL-DT-ST DVD-RAM GSA-H22N G: CDRom4
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 255MB (261324kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.3.2007
    UDF/ISO compilation
    2:03:30 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    2:03:30 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 561
    Content of VIDEO_TS.IFO has been modified

    2:03:30 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 561
    Content of VIDEO_TS.BUP has been modified

    2:03:30 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 561
    Content of VTS_01_0.IFO has been modified

    2:03:30 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 561
    Content of VTS_01_0.BUP has been modified

    2:03:30 PM #6 Phase 113 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed

    2:03:30 PM #7 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    2:03:30 PM #8 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    2:03:30 PM #9 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    2:03:30 PM #10 Text 0 File Reader.cpp, Line 124
    Reader running

    2:03:30 PM #11 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVD-RAM GSA-H22N running

    2:03:30 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:03:30 PM #13 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:03:30 PM #14 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    2:03:31 PM #15 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 587471 (130:32.71, 1147MB)

    2:03:31 PM #16 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    2:03:31 PM #17 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: HL-DT-ST DVD-RAM GSA-H22N, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    2:03:31 PM #18 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:03:31 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 587472 (587472) = #587472/130:32.72
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 587472 blocks [HL-DT-ST DVD-RAM GSA-H22N]
    --------------------------------------------------------------

    2:03:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [HL-DT-ST DVD-RAM GSA-H22N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1203142656, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    587472 | lead-out | 1 | 0x41 | 0x00

    2:03:31 PM #21 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    2:03:31 PM #22 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    2:03:31 PM #23 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    2:03:31 PM #24 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    2:03:31 PM #25 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    2:03:31 PM #26 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    2:03:31 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:03:31 PM #28 Text 0 File DVDR.cpp, Line 2720
    Recording mode: Sequential Recording Mode

    2:03:31 PM #29 Text 0 File DVDR.cpp, Line 2876
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:03:31 PM #30 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:03:39 PM #31 SPTI -600 File SCSIPassThrough.cpp, Line 289
    G: CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x06f70000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    2:03:39 PM #32 CDR -600 File Writer.cpp, Line 311
    Device not available
    G: HL-DT-ST DVD-RAM GSA-H22N

    2:03:39 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:03:39 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:03:39 PM #35 Text 0 File DVDR.cpp, Line 3116
    EndDAO: Last written address was -1

    2:03:56 PM #36 SPTI -600 File SCSIPassThrough.cpp, Line 289
    G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x033b5000: Len x48

    2:03:56 PM #37 SPTI -600 File SCSIPassThrough.cpp, Line 289
    G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x033b5000: Len x48

    2:03:57 PM #38 CDR -600 File WriterStatus.cpp, Line 167
    Device not available
    G: HL-DT-ST DVD-RAM GSA-H22N

    2:03:57 PM #39 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    2:03:57 PM #40 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 4x (5,540 KB/s)

    2:03:57 PM #41 SPTI -600 File SCSIPassThrough.cpp, Line 289
    G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  16. atawn

    atawn Member

    Joined:
    Mar 17, 2007
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    PLEASEEE MY FRIENDS HELP HELP HELP !!!
    I HATE THIS ERROR

    THIS IS MY LOG FILE
    _____________________________________________________________________

    ATAL

    1A20-620E-0010-2363-8673-7062*
    1A23-0609-9130-2313-1682-5231
    1A4C-0800-0000-1467-4037-2789

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75JHA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4082B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 32505856 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 189MB (194544kB)
    Free physical memory: 47MB (49136kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.3.2007
    UDF/ISO compilation
    5:20:38 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    5:20:39 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    5:20:39 PM #3 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    5:20:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    5:20:40 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 31744KB of Memory

    5:20:40 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    5:20:40 PM #7 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4082B running

    5:20:40 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    5:20:40 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    5:20:40 PM #10 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    5:20:40 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1206527 (268:07.02, 2356MB)

    5:20:40 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    5:20:40 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    5:20:40 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:20:40 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1206528 (1206528) = #1206528/268:7.3
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1206528 blocks [HL-DT-ST DVDRAM GSA-4082B]
    --------------------------------------------------------------

    5:20:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2470969344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1206528 | lead-out | 1 | 0x41 | 0x00

    5:20:40 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:20:40 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    5:20:41 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    5:20:41 PM #20 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    5:20:41 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    5:20:41 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    5:20:41 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:20:41 PM #24 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    5:20:41 PM #25 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:20:41 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:21:17 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
    Buffer x091c0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    5:21:17 PM #28 CDR -1135 File Writer.cpp, Line 311
    Write error
    D: HL-DT-ST DVDRAM GSA-4082B

    5:21:17 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:21:18 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    5:21:18 PM #31 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was -1

    5:21:18 PM #32 CDR -1135 File WriterStatus.cpp, Line 167
    Write error
    D: HL-DT-ST DVDRAM GSA-4082B

    5:21:18 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    5:21:18 PM #34 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 6:34:55 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    _____________________________________________________________________
    IVE HAD THIS PROBLEM FOR SOOOO LONG
     
  17. razir

    razir Member

    Joined:
    May 11, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    i have a problem with my Asus DRW - 1608P3S . I am trying to burn dvd's and the burning goes until it should end.. then when the proccess is 100% a pop`up window come to front and telling me that The process has been started and then everything fails. And i am looking at the error and it says that "could not perform disc at once" .. i did few dvd's and the error did not occure but after i discared the dvd and put it back in the ROM and trying to read the dvd it says that G:/ is not accessible .incorect function

    i hate this problem.. i hope you could help me with something.. i was thinking to format the primary partition.. what do you think.. thanks a lot


    Have you tried checking your basics ?
    what do you mean ?

    Have you flashed your Firmware ?
    latest one 1.24


    Do you have a working ASPI layer ?
    yes i took it from ahead nero site.

    When was your last Disk Defrag ?
    today

    What is your burner's IDE location ?
    i'm not sure what this means i mean does it refear to the way dvd rw is pluged tot the hard drive? :-?

    What are your burner's Jumper settings ?
    master (and i have an asus cd-rw on slave)

    What type of media are you using ?
    imation +R

    What programs are you using ?
    nero 6.0.0.9 (now it is updated to 6.6.1.15a)

    Exactly where are you and what are you doing when your error occurs.
    it apperd when i was burning a dvd with my movies (data dvd)

    What are your PC's specs ?
    AMD Athlon(TM)XP 1800+
    1.15 GHz , 512 MB or RAM

    Do you have any Roxio products installed on your PC ?
    not at all

    Are you running in PIO or DMA transfer mode ?
    DMA (it says both primary IDE and secondly IDE there.. DMA if possible and somethuing about ultra DMA mode 2)

    the error:


    odin
    odinX

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
    Nero version: 6.0.0.9
    Recorder: <ASUS DRW-1608P3S> Version: 1.24 - HA 0 TA 1 - 6.0.0.9
    Adapter driver: <atapi> HA 0
    Drive buffer : 2000kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.0.0.9
    Adapter driver: <d347prt> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : ASUS DRW-1608P3S atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 197MB (202520kB)
    Memory in use : 61 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.5.2007
    ISO compilation
    10:44:16 PM #1 Text 0 File Isodoc.cpp, Line 5748
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Continue multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:44:16 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    10:44:16 PM #3 Text 0 File Writer.cpp, Line 127
    Writer ASUS DRW-1608P3S running

    10:44:16 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3854
    First writeable address = 0 (0x00000000)

    10:44:16 PM #5 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    10:44:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 228
    Last possible write address on media: 2295103 (510:01.28)
    Last address to be written: 2137887 (475:05.12)

    10:44:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 233
    Write in overburning mode: FALSE

    10:44:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 1722
    Recorder: ASUS DRW-1608P3S, Media type: DVD+R
    Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    10:44:20 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 768
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 608 (608) = #608/0:8.8
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [ASUS DRW-1608P3S ]
    --------------------------------------------------------------

    10:44:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 937
    Prepare recorder [ASUS DRW-1608P3S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 2 to 2:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1552384, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    2137130 | lead-in | 0 | 0x00 | 0x41
    2137130 | 2 | 0 | 0x00 | 0x41
    2137280 | 2 | 1 | 0x00 | 0x41
    2137888 | lead-out | 1 | 0x00 | 0x41

    10:44:20 PM #11 Phase 24 File dlgbrnst.cpp, Line 1843
    Caching of files started

    10:44:20 PM #12 Phase 25 File dlgbrnst.cpp, Line 1843
    Caching of files completed

    10:44:20 PM #13 Phase 36 File dlgbrnst.cpp, Line 1843
    Burn process started at 16.1x (22,218 KB/s)

    10:44:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2130
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #2137280

    10:44:20 PM #15 Text 0 File Cdrdrv.cpp, Line 7906
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 07 44 41 58 4F 4E 00 - 00 00 41 5A 33 00 38 23 ..DAXON...AZ3.8#
    54 37 14 00 23 6F 00 7D - 6A 17 19 0C 0C 0A 0B 01 T7..#o.}j.......
    19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 01 ................

    10:44:20 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:54,932 (54932ms) -> OK

    10:44:20 PM #17 Text 0 File DVDPlusRW.cpp, Line 553
    Start write address at LBA 2137280
    DVD high compatibility mode: Yes

    10:44:20 PM #18 Text 0 File WriterStatus.cpp, Line 113
    <ASUS DRW-1608P3S > start writing Lead-Out at LBA 2137888 (209F20h), lenght 0 blocks

    10:44:20 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227
    all writers idle, stopping conversion

    10:44:50 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1205
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    10:44:50 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1205
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x72 0x03

    10:44:50 PM #22 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    10:44:50 PM #23 CDR -1066 File ThreadedTransferInterface.cpp, Line 1620
    Invalid field in command

    10:44:50 PM #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1620
    Could not perform end of Disc-at-once

    10:44:50 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    10:44:50 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    10:44:50 PM #27 Phase 38 File dlgbrnst.cpp, Line 1843
    Burn process failed at 16.1x (22,218 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 7:12:26 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ______________________________________________________________
    DEFRAG:

    Volume (C:)
    Volume size = 9.92 GB
    Cluster size = 8 KB
    Used space = 7.83 GB
    Free space = 2.09 GB
    Percent free space = 21 %

    Volume fragmentation
    Total fragmentation = 9 %
    File fragmentation = 17 %
    Free space fragmentation = 1 %

    File fragmentation
    Total files = 39,610
    Average file size = 169 KB
    Total fragmented files = 40
    Total excess fragments = 5,671
    Average fragments per file = 1.14

    Pagefile fragmentation
    Pagefile size = 768 MB
    Total fragments = 642

    Folder fragmentation
    Total folders = 2,821
    Fragmented folders = 73
    Excess folder fragments = 215

    --------------------------------------------------------------

    regards


     
  18. ndbhatt

    ndbhatt Member

    Joined:
    Jun 16, 2007
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi,
    I have done fresh installation of win XP on my laptop. My DVD / RW was working fine before re-installation but now it fails to burn a cd image. I have also done defragementation of my HDD. Also, done with forceASPI install. Everything installed fine but still the issue persists

    The log file info is as below:
    NIK
    PERSONAL
    xxxx-xxxx-xxxx-xxxx-xxxx-xxxx

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.15
    Internal Version: 6, 6, 1, 15
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-L532M>Version: HR08 - HA 1 TA 0 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-L532M>Version: HR08 - HA 1 TA 0 - 6.6.1.15
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532M atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532M D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1046704kB)
    Free physical memory: 687MB (703548kB)
    Memory in use : 32 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    16.6.2007
    CD Image
    4:41:38 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    4:41:38 PM #2 Text 0 File Burncd.cpp, Line 3014
    TSSTcorp CD/DVDW TS-L532M
    Super Link activated

    4:41:38 PM #3 Text 0 File Burncd.cpp, Line 3316
    Turn on Disc-At-Once, using CD-R/RW media

    4:41:39 PM #4 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 359844 ( 79:59.69)
    Last address to be written: 31391 ( 7:00.41)

    4:41:39 PM #5 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    4:41:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 2616
    Recorder: TSSTcorp CD/DVDW TS-L532M;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    4:41:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:41:39 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 814
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 31392 (31392) = #31392/6:58.42
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 31392 blocks [TSSTcorp CD/DVDW TS-L532M]
    --------------------------------------------------------------

    4:41:39 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1013
    Prepare recorder [TSSTcorp CD/DVDW TS-L532M] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 64598016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    31392 | lead-out | 1 | 0x41 | 0x00

    4:41:39 PM #10 Text 0 File SCSIPTICommands.cpp, Line 208
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    4:41:39 PM #11 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    4:41:39 PM #12 Text 0 File Burncd.cpp, Line 4158
    Cache writing successful.

    4:41:39 PM #13 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    4:41:39 PM #14 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (2,400 KB/s)

    4:41:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    4:41:39 PM #16 Text 0 File Mmc.cpp, Line 17494
    StartDAO : CD-Text - Off

    4:41:39 PM #17 Text 0 File Mmc.cpp, Line 22143
    Set BUFE: Super Link -> ON

    4:41:39 PM #18 Text 0 File Mmc.cpp, Line 17722
    CueData, Len=32
    41 00 00 14 00 00 00 00
    41 01 00 10 00 00 00 00
    41 01 01 10 00 00 02 00
    41 aa 01 14 00 07 00 2a

    4:44:39 PM #19 SPTI -1114 File SCSIPassThrough.cpp, Line 178
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00
    Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
    Buffer x06e82900: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    4:44:39 PM #20 CDR -1114 File Writer.cpp, Line 281
    Reset occurred
    D: TSSTcorp CD/DVDW TS-L532M

    4:44:39 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 178
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C

    4:44:39 PM #22 CDR -1135 File WriterStatus.cpp, Line 162
    Write error
    D: TSSTcorp CD/DVDW TS-L532M

    4:44:39 PM #23 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    4:44:40 PM #24 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 16x (2,400 KB/s)

    4:44:40 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    4:44:43 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
    DriveLocker: UnLockVolume completed

    4:44:43 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I would appreciate any help.

    Thanks,

    Nik
     
  19. singjai

    singjai Member

    Joined:
    Dec 29, 2005
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    16
    I've skimmed the entire thread, so apologies if I've missed this: microadvantage.net doesn't seem to exist now. What I've been able to find is Roxio Zap 1.5. Is this what you meant?
    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
     
  20. caprulz

    caprulz Member

    Joined:
    Jul 12, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    hey there all,
    am new here.
    I got the same error too.

    Have you tried checking your basics ?
    not sure wat basics u mean

    Have you flashed your Firmware ?
    yes, yesterday. (i'm using LG GSA-H42N)

    Do you have a working ASPI layer ?
    yes i took it from ahead Nero site.

    When was your last Disk Defrag ?
    not yet, but it said that i need not defrag

    What is your burner's IDE location ?
    I've 1 SATA HD, 1 IDE HD and the burner.

    What are your burner's Jumper settings ?
    SATA HD = primary master
    IDE HD = IDE slave
    burner = IDE cable select (using same IDE with the HD)

    What type of media are you using ?
    imation +R

    What programs are you using ?
    nero 7.2.0.3

    Exactly where are you and what are you doing when your error occurs.
    it appeared when i want to copy DVD. and it happened at the very beginning, not the end. (if counting from the progress bar, it was at 3rd or 4th bar).
    I tried to make movie DVD too, but to no avail, it stopped at the same bar location.

    What are your PC's specs ?
    Pentium D 2.8GHz
    1GB RAM

    Do you have any Roxio products installed on your PC ?
    how to check, but as far as i'm concerned, no, coz I didnt install the inCD software.

    Are you running in PIO or DMA transfer mode ?
    SAta HD - Ultra DMA 5
    IDE HD - Multi Word DMA 2
    burner - Ultra DMA 4

    below is my log :
    ----------------------------------------------------------------------
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/07/2007 18:40:28

    NT-SPTI used
    Nero Version: 7.2.0.3
    Internal Version: 7, 2, 0, 3

    Recorder: <HL-DT-ST DVDRAM GSA-H42N>Version: RL01 - HA 1 TA 0 - 7.2.0.3
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GSA-H42N >Version: RL01 - HA 1 TA 0 - 7.2.0.3
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-H42N atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On
    DiskPeripheral : ST3160811AS atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-H42N E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1015MB (1039724kB)
    Free physical memory: 524MB (537224kB)
    Memory in use : 48 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.7.2007
    ===== Disc-Copy over image - 1st step : Copy to image ...

    19:00:37 #1 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    19:00:37 #2 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    19:00:37 #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 192KB of Memory

    19:00:37 #4 Text 0 File Reader.cpp, Line 124
    Reader running

    19:00:37 #5 Text 0 File Writer.cpp, Line 113
    Writer Image Recorder running

    19:00:37 #6 Text 0 File DVDCopy.cpp, Line 292
    DVD Track-Information from source disc:
    Media Type: DVD-R
    S01 T01 Con 0x14 Start 0 Len 1283776 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    19:00:37 #7 Text 0 File DVDCopy.cpp, Line 405
    Max -1 tracks of 1 allowed to copy
    1: 0 - 1283776 = 1283776, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    19:00:37 #8 Text 0 File Burncd.cpp, Line 3365
    Turn on Disc-At-Once, using DVD media

    19:00:38 #9 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 4718591 (1048:34.41, 9215MB)
    Last address to be written: 1283775 (285:17.00, 2507MB)

    19:00:38 #10 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    19:00:38 #11 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:00:38 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1283776 (1283776) = #1283776/285:17.1
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1283776 blocks [Image Recorder]
    --------------------------------------------------------------

    19:00:38 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2629173248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1283776 | lead-out | 1 | 0x41 | 0x00

    19:00:38 #14 Phase 120 File dlgbrnst.cpp, Line 1730
    Creating the image for burning

    19:00:38 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    19:03:47 #16 Text 0 File WriterStatus.cpp, Line 116
    <Image Recorder> start writing Lead-Out at LBA 1283776 (1396C0h), length 0 blocks

    19:03:47 #17 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    19:03:47 #18 Phase 121 File dlgbrnst.cpp, Line 1730
    Creating Image completed successfully



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    19:03:56 #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    19:03:56 #2 Text 0 File Reader.cpp, Line 124
    Reader running

    19:03:56 #3 Text 0 File Writer.cpp, Line 113
    Writer E: HL-DT-ST DVDRAM GSA-H42N running

    19:03:56 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 0
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2629173248
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=285:17.01 ( 1283776) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\Aman\My Documents\TempImage.nrg>

    19:03:56 #5 Text 0 File Burncd.cpp, Line 3365
    Turn on Disc-At-Once, using DVD media

    19:05:40 #6 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1283775 (285:17.00, 2507MB)

    19:05:40 #7 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    19:05:40 #8 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: HL-DT-ST DVDRAM GSA-H42N, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    19:05:40 #9 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

    19:05:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1283776 (1283776) = #1283776/285:17.1
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1283776 blocks [E: HL-DT-ST DVDRAM GSA-H42N]
    --------------------------------------------------------------

    19:06:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: HL-DT-ST DVDRAM GSA-H42N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2629173248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1283776 | lead-out | 1 | 0x41 | 0x00

    19:06:27 #12 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    19:06:27 #13 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    19:06:27 #14 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 16x (22,160 KB/s)

    19:06:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    19:06:27 #16 Text 0 File Cdrdrv.cpp, Line 8914
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: M01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

    19:06:27 #17 Text 0 File DVDR.cpp, Line 5746
    Drive: HL-DT-ST DVDRAM GSA-H42N
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    19:06:27 #18 CDR -1207 File DVDR.cpp, Line 5676
    Book Type automatically set to: DVD-ROM

    19:06:27 #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: No

    19:06:46 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C
    Buffer x04300000: Len x10000
    0x00 01 00 00 00 00 00 13 34 01 00 01 00 00 01 01
    0x00 00 00 22 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    19:06:46 #21 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: HL-DT-ST DVDRAM GSA-H42N

    19:06:46 #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    19:06:46 #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    19:06:47 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C

    19:06:49 #25 CDR -1135 File WriterStatus.cpp, Line 167
    Write error
    E: HL-DT-ST DVDRAM GSA-H42N

    19:06:49 #26 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    19:06:49 #27 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/05/2006 06:48:04 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ---------------------------------------------------------------------

    hope you guys could help me out..
    few friends of mine asked me for help to burn for them, and this has been happened like a week already. huhuuhuhu...
     
Thread Status:
Not open for further replies.

Share This Page