"Could not perform end of Disc-at-once" ??? Please Help

Discussion in 'Nero discussion' started by ShadowChi, Nov 11, 2008.

Page 1 of 2
  1. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Ok so I recently built a new system(See Sig) and I can not seem to get past the Disc-at-once part of the CD thus creating several coasters lol....I do not know what the problems is. I am using the same programs as before same cd's....perhaps my drivers are bad for the drivers?? but it burns the data just doesnt finish it. If I explore the coaster I can see all the data but for some reason I am not writing the end of the disc thus creating junk...

    Thanks..


    Here is a log file from a failed attempt:

    4C87-*serial number removed*

    Windows XP 5.2
    AMD64
    Wow64Process
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files (x86)\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:43:16 PM

    NT-SPTI used
    Nero API version: 7.9.6.4
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files (x86)\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 9, 6, 4

    Recorder: <PIONEER DVD-RW DVR-216D>Version: 1.07 - HA 1 TA 0 - 7.9.6.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : NVIDIA STRIPE 465.77G nvrd64 Port 0 ID 1 DMA: Off
    ArrayPeripheral : NVIDIA nvgts64 Port 4 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-216D1.07 nvgts64 Port 4 ID 1 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-216D1.07 nvgts64 Port 5 ID 0 DMA: Off
    ArrayPeripheral : NVIDIA nvgts64 Port 5 ID 1 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-216D D: CdRom0
    PIONEER DVD-RW DVR-216D E: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 4095MB (4194303kB)
    Free physical memory: 4095MB (4194303kB)
    Memory in use : 11 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.11.2008
    NeroAPI
    9:41:17 PM #1 Phase 112 File APIProgress.cpp, Line 285
    DVD-Video files reallocation started

    9:41:17 PM #2 Phase 114 File APIProgress.cpp, Line 285
    DVD-Video files reallocation completed (no file modified)

    9:41:17 PM #3 Phase 111 File APIProgress.cpp, Line 285
    DVD-Video files sorted

    9:41:17 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:41:17 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:41:17 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    9:41:17 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    9:41:17 PM #8 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    9:41:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2222975 (493:59.50, 4341MB)

    9:41:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO

    9:41:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: PIONEER DVD-RW DVR-216D, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: F16, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    9:41:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:41:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2222976 (2222976) = #2222976/493:59.51
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222976 blocks [D: PIONEER DVD-RW DVR-216D]
    --------------------------------------------------------------

    9:41:22 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: PIONEER DVD-RW DVR-216D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4552654848, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2222976 | 0 | 0x00
    2222976 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:41:22 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    9:41:22 PM #16 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

    9:41:22 PM #17 Phase 24 File APIProgress.cpp, Line 285
    Caching of files started

    9:41:22 PM #18 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    9:41:22 PM #19 Phase 25 File APIProgress.cpp, Line 285
    Caching of files completed

    9:41:22 PM #20 Phase 36 File APIProgress.cpp, Line 285
    Burn process started at 12x (16,620 KB/s)

    9:41:22 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:41:23 PM #22 Text 0 File Cdrdrv.cpp, Line 9869
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RITEK...
    Media type ID: F16
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8
    23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A #T7..Pn..h......
    01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    9:41:23 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x0508b2c0: Len x648

    9:41:23 PM #24 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:41:23 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    9:46:54 PM #26 Text 0 File WriterStatus.cpp, Line 113
    <D: PIONEER DVD-RW DVR-216D> start writing Lead-Out at LBA 2222976 (21EB80h), length 0 blocks

    9:46:56 PM #27 SPTI -1169 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x07
    CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80

    9:46:58 PM #28 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 2222976

    9:46:58 PM #29 CDR -1080 File ThreadedTransferInterface.cpp, Line 1893
    Disc not present
    D: PIONEER DVD-RW DVR-216D

    9:46:58 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1893
    Could not perform end of Disc-at-once

    9:46:59 PM #31 Phase 127 File APIProgress.cpp, Line 285
    Generating DVD high compatibility borders

    9:47:21 PM #32 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 0

    9:47:21 PM #33 CDR -1080 File WriterStatus.cpp, Line 162
    Disc not present
    D: PIONEER DVD-RW DVR-216D

    9:47:21 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    9:47:22 PM #35 Phase 38 File APIProgress.cpp, Line 285
    Burn process failed at 12x (16,620 KB/s)

    9:47:22 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    9:47:22 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    9:47:22 PM #38 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:47:25 PM #39 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    9:47:25 PM #40 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
     
    Last edited: Nov 12, 2008
    ShadowChi, Nov 11, 2008
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    Thread teleported to the relevant forum (Nero).
     
    creaky, Nov 12, 2008
    #2
  3. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    *Bump*
     
    ShadowChi, Nov 12, 2008
    #3
  4. 7thsinger

    7thsinger Regular member

    Joined:
    Oct 17, 2007
    Messages:
    3,281
    Likes Received:
    3
    Trophy Points:
    48
    Bumping your thread is against forum rules.

    Enable DMA.
    http://forums.afterdawn.com/thread_view.cfm/260038

    Slow down your burn speed to 6x or 8x.
     
    7thsinger, Nov 12, 2008
    #4
  5. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I was unaware that you could not bump...wont do it again! :)

    Also..when I go to that link..there are several img's missing..
    The 2nd,3rd,4th and 5th ones are the main ones I think..

    Also..Does that pertain to SATA as well? and if I uninstall my Primary and Secondary IDE channel drivers it wont affect my RAID will it?
     
    ShadowChi, Nov 12, 2008
    #5
  6. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Ok so all I am wondering now is if I uninstall all those drivers and let windows reinstall them will I screw up my RAID 0 array?
     
    ShadowChi, Nov 12, 2008
    #6
  7. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Still wondering if doing that will mess with my RAID.....
     
    ShadowChi, Nov 16, 2008
    #7
  8. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    So..is anyone going to help me out on this one? still wondering if doing this will mess up my raid....
     
    ShadowChi, Nov 27, 2008
    #8
  9. RGFindlay

    RGFindlay Guest

    In my mind, it seams unlikely to affect your RAID setup...
    However, No Promises...

    How is your RAID set up... Onboard IDE RAID, Onboard SATA RAID or Offboard...??

    Direct Memory Access is generally favourable, anyway...
    You may have to stripe them again... If you Striped on a Software Level...

    Back up your Data before you try... PCs can always find a way to take up your time... :)
     
    RGFindlay, Nov 29, 2008
    #9
  10. RGFindlay

    RGFindlay Guest

    Can someone tell me what the thread bump thing was about, please...
    Thanx...
     
    RGFindlay, Nov 29, 2008
    #10
  11. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I striped them through the bios. I am using an EVGA-132 mobo and it is an onboard Sata array.....
     
    ShadowChi, Nov 29, 2008
    #11
  12. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Is no one listening or does no one know the issue here? some help would be greatly appreciated
     
    ShadowChi, Nov 30, 2008
    #12
  13. RGFindlay

    RGFindlay Guest

    Redundant Array should be fine...
     
    RGFindlay, Nov 30, 2008
    #13
  14. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    its a raid 0....so really...there is no redundancy....lol.....
     
    ShadowChi, Nov 30, 2008
    #14
  15. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    and another note..when I look at the IDE Properties.. It is showing in both Primary and Secondary Device 0 and Device 1 both having the transfer mode set to DMA if available but under both it is showing the Current Transfer Mode as Not Applicable......Will doing this "unistall" of the drivers cure that and not mess up my raid 0 then??
     
    ShadowChi, Nov 30, 2008
    #15
  16. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Did you say your drive is SATA?
    it looks like your computer is using an IDE Controller to handle your SATA Drive ?

    Also you should update your burner's firmware, there is version 1.09 available.
     
    cyprusrom, Nov 30, 2008
    #16
  17. RGFindlay

    RGFindlay Guest

    Yes, you're right... There is no redundancy per se' in RAID 0...
    RAID is Redundant Array of Inexpensive Devices called such 'coz dudes like us have to stack up a bunch of devices to make space for all our junk... Hence the reference Redundant Array...

    In your follow up there you mentioned the drives were set to use DMA...
    This suggests that you need not uninstall the drivers...
    The log showed DMA as Off, suggesting maybe DMA unavailable...

    I think we should bark up another tree...

    -------------------------------------------------------------
    9:47:21 PM #33 CDR -1080 File WriterStatus.cpp, Line 162
    Disc not present D: PIONEER DVD-RW DVR-216D

    9:47:21 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    9:47:22 PM #35 Phase 38 File APIProgress.cpp, Line 285
    Burn process failed at 12x (16,620 KB/s)

    -------------------------------------------------------------

    I found that interesting...

    The suggested firmware update would be the tree to bark up now...

    Also interested in Cyprusrom's question... Is the optical drive also SATA..??
     
    RGFindlay, Nov 30, 2008
    #17
  18. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    I really don't know about the STA drives and stuff( all your talk about the Raid Redundant Array and stuff makes me dizzy :)).
    I was just pointing out something that jumped at me.

    Why not uninstall the nVidia driver just for your burner, the IDE,and let Windows deal with it?
     
    cyprusrom, Nov 30, 2008
    #18
  19. RGFindlay

    RGFindlay Guest

    It doesn't matter really, I'm just interested...
    SATA is an IDE medium (Integrated Device Electronics) - The main controller is on the device...

    The problem has me at a loss... I think I may have to give up and hope someone else can help...

    Although I use SATA and RAID, I don't use Striping...
    As for Striping SATA... Where ya gonna use a 3 - 6 Gb/sec bandwidth unless you're capturing 1280p full frame video..??

    I hope someone can help... Hopefully the firmware will do it...
     
    RGFindlay, Nov 30, 2008
    #19
  20. ShadowChi

    ShadowChi Member

    Joined:
    Nov 11, 2008
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Yes all my drives in my system are SATA :)
    I was wondering that as well as to why they are showing up in IDE. I updated the firmware for the Drives (2X)Pioneer DVD-RW DVR216D...also..these are showing up as SCSI CdRom Devices in Device manager..is this correct?
    I am now wondering if maybe they have to be set up on certain cables but I was always under the assumption that the satas were just hook em all up and go..basically...Once again..I am ver scepticle of removing my Primary and Secondary IDE Channel drivers as I am running a RAID 0 Array and if I do that I think that windows screw up my OS...lol...

    In Device manager everything is saying that DMA is enabled but it saying that under where it says "Transfer Mode: DMA if Available" it says "Current Transfer Mode: Not Applicable" I dont think this is correct and cant figure out how to change it to Ultra DMA if Available.....Once again bringing me back to the whole enabling DMA fix problem..I dont want to, cant mess up my RAID lol..I hate reinstalling everything!
    I built this system with 2 identical drives in hopes of not worrying about this type of thing..ha Thanks Microsoft for making my life NOT EASY....

    BTW..I am running Windows XP Pro 64bit if that helps anything...here is the latest Log file from yet another FAIL attempt...

    4C87-200M-4045-E10K-000X-X640-0800-3X00-0000-4072-6K9C-**** (*)

    Windows XP 5.2
    AMD64
    Wow64Process
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files (x86)\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:43:16 PM

    NT-SPTI used
    Nero API version: 7.9.6.4
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files (x86)\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 9, 6, 4

    Recorder: <PIONEER DVD-RW DVR-216D>Version: 1.07 - HA 1 TA 0 - 7.9.6.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : NVIDIA STRIPE 465.77G nvrd64 Port 0 ID 1 DMA: Off
    ArrayPeripheral : NVIDIA nvgts64 Port 4 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-216D1.07 nvgts64 Port 4 ID 1 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-216D1.07 nvgts64 Port 5 ID 0 DMA: Off
    ArrayPeripheral : NVIDIA nvgts64 Port 5 ID 1 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-216D D: CdRom0
    PIONEER DVD-RW DVR-216D E: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 4095MB (4194303kB)
    Free physical memory: 4095MB (4194303kB)
    Memory in use : 11 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.11.2008
    NeroAPI
    6:02:41 PM #1 Phase 112 File APIProgress.cpp, Line 285
    DVD-Video files reallocation started

    6:02:41 PM #2 Phase 114 File APIProgress.cpp, Line 285
    DVD-Video files reallocation completed (no file modified)

    6:02:41 PM #3 Phase 111 File APIProgress.cpp, Line 285
    DVD-Video files sorted

    6:02:41 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    6:02:42 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    6:02:42 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    6:02:42 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    6:02:42 PM #8 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    6:02:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286191 (508:02.41, 4465MB)

    6:02:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO

    6:02:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: PIONEER DVD-RW DVR-216D, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: F16, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    6:02:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:02:49 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286192 (2286192) = #2286192/508:2.42
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286192 blocks [D: PIONEER DVD-RW DVR-216D]
    --------------------------------------------------------------

    6:02:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: PIONEER DVD-RW DVR-216D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682121216, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2286192 | 0 | 0x00
    2286192 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    6:02:49 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    6:02:49 PM #16 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

    6:02:49 PM #17 Phase 24 File APIProgress.cpp, Line 285
    Caching of files started

    6:02:49 PM #18 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    6:02:49 PM #19 Phase 25 File APIProgress.cpp, Line 285
    Caching of files completed

    6:02:49 PM #20 Phase 36 File APIProgress.cpp, Line 285
    Burn process started at 4x (5,540 KB/s)

    6:02:50 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:02:50 PM #22 Text 0 File Cdrdrv.cpp, Line 9869
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RITEK...
    Media type ID: F16
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8
    23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A #T7..Pn..h......
    01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    6:02:50 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x05535a40: Len x648

    6:02:50 PM #24 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:02:50 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    6:17:29 PM #26 Text 0 File WriterStatus.cpp, Line 113
    <D: PIONEER DVD-RW DVR-216D> start writing Lead-Out at LBA 2286192 (22E270h), length 0 blocks

    6:17:58 PM #27 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 2286192

    6:17:58 PM #28 CDR -1080 File ThreadedTransferInterface.cpp, Line 1893
    Disc not present
    D: PIONEER DVD-RW DVR-216D

    6:17:58 PM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1893
    Could not perform end of Disc-at-once

    6:17:58 PM #30 SPTI -1046 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 05

    6:17:58 PM #31 Phase 127 File APIProgress.cpp, Line 285
    Generating DVD high compatibility borders

    6:17:58 PM #32 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 0

    6:17:58 PM #33 CDR -1080 File WriterStatus.cpp, Line 162
    Disc not present
    D: PIONEER DVD-RW DVR-216D

    6:17:58 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    6:17:58 PM #35 Phase 38 File APIProgress.cpp, Line 285
    Burn process failed at 4x (5,540 KB/s)

    6:17:58 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    6:17:58 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    6:17:58 PM #38 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:18:01 PM #39 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:18:01 PM #40 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
     
    ShadowChi, Nov 30, 2008
    #20
Page 1 of 2

Share This Page