1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

''Could not perform Fixation'' error!!

Discussion in 'Nero discussion' started by _Sonic_, Sep 28, 2005.

  1. _Sonic_

    _Sonic_ Guest

    Hi, I'm using Nero 6.6.0.16 and when I try to make a MP3 cd I get this error saying that Fixation cannot be performed... why do I get this and how do I solve it?
     
    _Sonic_, Sep 28, 2005
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    pls post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
     
    creaky, Sep 28, 2005
    #2
  3. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Here si tyhe history of my last burn, it is driving me carzy it stupid. Anyways im gunna buy dvd-rw eventually but only if i know this wont occur on that. Still can some one help me out with this current problem

    thank you

    log


    16:40:31 #11 Phase 24 File dlgbrnst.cpp, Line 1436
    Caching of files started

    16:40:31 #12 Phase 25 File dlgbrnst.cpp, Line 1436
    Caching of files completed

    16:40:31 #13 Phase 36 File dlgbrnst.cpp, Line 1436
    Burn process started at 10x (1,500 KB/s)

    16:40:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    16:40:31 #15 Text 0 File Mmc.cpp, Line 14476
    Set BUFE: Super Link -> ON

    16:42:11 #16 SCSI -1064 File Cdrdrv.cpp, Line 1390
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A11078
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x8B 0x23 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x21 0x02

    16:42:11 #17 mmc -1064 File Writer.cpp, Line 316
    Invalid block address

    16:42:11 #18 Text 0 File ThreadedTransfer.cpp, Line 219
    all writers idle, stopping conversion

    16:42:20 #19 Text 0 File ThreadedTransfer.cpp, Line 213
    conversion idle, stopping reader

    16:42:20 #20 CDR -201 File WriterStatus.cpp, Line 184
    Invalid writestate

    16:42:20 #21 TRANSFER -18 File WriterStatus.cpp, Line 184
    Could not perform EndTrack

    16:42:20 #22 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    16:42:20 #23 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    16:42:20 #24 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    16:42:20 #25 Text 0 File WriterStatus.cpp, Line 232
    falling back to disc fixation

    16:42:20 #26 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    16:42:20 #27 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    16:42:20 #28 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    16:42:20 #29 Phase 38 File dlgbrnst.cpp, Line 1436
    Burn process failed at 10x (1,500 KB/s)

    16:42:20 #30 Text 0 File Scsicmd.cpp, Line 371
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
    File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
    File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
    File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
    ====== *** Nero-Burning Rom, History File *** ======




     
    scuzz0, Oct 9, 2005
    #3
  4. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    hi, you're missing the first bit up to that section you posted. the way to tell the start of a section is to look for this "====== *** NeroAPI, History File *** ====== "

    i'll work with what i've got for now..
     
    creaky, Oct 9, 2005
    #4
  5. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Sorry about that this help is greatly appreciated --

    ====== *** Nero-Burning Rom, History File *** ======
    na
    na
    1502-1000-****-****-****-****

    Windows 98 4.90 (ME)
    WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
    Nero Version: 5.5.6.0
    Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.6.0
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.6.0
    Adapter driver: <ESDI_506> HA 0
    LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
    BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 28311552 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 191MB (196020kB)
    Free physical memory: 0MB (208kB)
    Memory in use : 80 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry: 1
    Wizard: On

    CD-ROM (ISO)
    8.10.2005

    13:55:35 #1 Phase 89 File dlgbrnst.cpp, Line 1436
    Super Link activated

    13:55:36 #2 Text 0 File Reader.cpp, Line 117
    Reader running

    13:55:36 #3 Text 0 File Writer.cpp, Line 122
    Writer BCE2410IM running

    13:55:36 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
    First writeable address = 0 (0x00000000)

    13:55:36 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 339437 (339437) = #339437/75:25.62
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    13:55:38 #6 Text 0 File DlgWaitCD.cpp, Line 194
    Last possible write address on media: 359848 (79:59.73)
    Last address to be written: 339439 (75:27.64)

    13:55:39 #7 Text 0 File DlgWaitCD.cpp, Line 1331
    Recorder: BTC BCE2410IM;
    CDR code: 00 97 17 06; CD manufacturer unknown
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    13:55:41 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder BCE2410IM for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Close Session
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 695474176

    13:55:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
    Removed 2 run-out blocks from end of track 1.

    13:55:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 339437 (339437) = #339437/75:25.62
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 339435 blocks [BCE2410IM ]
    --------------------------------------------------------------

    13:55:41 #11 Phase 24 File dlgbrnst.cpp, Line 1436
    Caching of files started

    13:55:41 #12 Phase 25 File dlgbrnst.cpp, Line 1436
    Caching of files completed

    13:55:41 #13 Phase 36 File dlgbrnst.cpp, Line 1436
    Burn process started at 24x (3,600 KB/s)

    13:55:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    13:55:41 #15 Text 0 File Mmc.cpp, Line 14476
    Set BUFE: Super Link -> ON

    13:57:41 #16 Text 0 File Scsicmd.cpp, Line 1883
    SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 02 6C 00 00 1F 00 00 00

    13:57:41 #17 CDR -1175 File Cdrdrv.cpp, Line 1304
    Internal trace
    Command timeout occured: timeout 90000ms, counter 1
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00


    13:57:41 #18 SCSI -26 File Cdrdrv.cpp, Line 1335
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0397E110
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    13:57:41 #19 SCSI -26 File Cdrdrv.cpp, Line 1390
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0397E110
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    13:57:41 #20 CDR -26 File Writer.cpp, Line 316
    SCSI/ATAPI command timeout error

    13:57:42 #21 Text 0 File ThreadedTransfer.cpp, Line 219
    all writers idle, stopping conversion

    13:57:46 #22 Text 0 File ThreadedTransfer.cpp, Line 213
    conversion idle, stopping reader

    13:57:56 #23 Text 0 File Scsicmd.cpp, Line 1883
    SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00

    13:57:56 #24 SCSI -1000 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    13:57:56 #25 CDR -1175 File Cdrdrv.cpp, Line 1202
    Internal trace
    Command timeout occured: timeout 10000ms, counter 1
    CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00


    13:57:56 #26 SCSI -26 File Cdrdrv.cpp, Line 1230
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    13:59:12 #27 CDR -1000 File WriterStatus.cpp, Line 181
    SCSI/IDE error

    13:59:12 #28 TRANSFER -18 File WriterStatus.cpp, Line 181
    Could not perform EndTrack

    13:59:12 #29 CDR -201 File WriterStatus.cpp, Line 184
    Invalid writestate

    13:59:12 #30 TRANSFER -18 File WriterStatus.cpp, Line 184
    Could not perform EndTrack

    13:59:12 #31 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    13:59:12 #32 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    13:59:12 #33 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    13:59:12 #34 Text 0 File WriterStatus.cpp, Line 232
    falling back to disc fixation

    13:59:12 #35 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    13:59:12 #36 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    13:59:12 #37 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    13:59:12 #38 Phase 38 File dlgbrnst.cpp, Line 1436
    Burn process failed at 24x (3,600 KB/s)

    13:59:12 #39 Text 0 File Scsicmd.cpp, Line 371
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
    ====== *** Nero-Burning Rom, History File *** ======
    na
    na
    1502-1000-0125-0591-3952-5380

    Windows 98 4.90 (ME)
    WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
    Nero Version: 5.5.6.0
    Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.6.0
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.6.0
    Adapter driver: <ESDI_506> HA 0
    LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
    BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 28311552 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 191MB (196020kB)
    Free physical memory: 0MB (320kB)
    Memory in use : 86 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry: 1
    Wizard: On

    CD-ROM (ISO)
    9.10.2005

    16:40:24 #1 Phase 89 File dlgbrnst.cpp, Line 1436
    Super Link activated

    16:40:25 #2 Text 0 File Reader.cpp, Line 117
    Reader running

    16:40:25 #3 Text 0 File Writer.cpp, Line 122
    Writer BCE2410IM running

    16:40:25 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
    First writeable address = 0 (0x00000000)

    16:40:27 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 335977 (335977) = #335977/74:39.52
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    16:40:28 #6 Text 0 File DlgWaitCD.cpp, Line 194
    Last possible write address on media: 359848 (79:59.73)
    Last address to be written: 335979 (74:41.54)

    16:40:29 #7 Text 0 File DlgWaitCD.cpp, Line 1331
    Recorder: BTC BCE2410IM;
    CDR code: 00 97 17 06; CD manufacturer unknown
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    16:40:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder BCE2410IM for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Close Session
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 688388096

    16:40:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
    Removed 2 run-out blocks from end of track 1.

    16:40:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 335977 (335977) = #335977/74:39.52
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 335975 blocks [BCE2410IM ]
    --------------------------------------------------------------

    16:40:31 #11 Phase 24 File dlgbrnst.cpp, Line 1436
    Caching of files started

    16:40:31 #12 Phase 25 File dlgbrnst.cpp, Line 1436
    Caching of files completed

    16:40:31 #13 Phase 36 File dlgbrnst.cpp, Line 1436
    Burn process started at 10x (1,500 KB/s)

    16:40:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    16:40:31 #15 Text 0 File Mmc.cpp, Line 14476
    Set BUFE: Super Link -> ON

    16:42:11 #16 SCSI -1064 File Cdrdrv.cpp, Line 1390
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A11078
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x8B 0x23 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x21 0x02

    16:42:11 #17 mmc -1064 File Writer.cpp, Line 316
    Invalid block address

    16:42:11 #18 Text 0 File ThreadedTransfer.cpp, Line 219
    all writers idle, stopping conversion

    16:42:20 #19 Text 0 File ThreadedTransfer.cpp, Line 213
    conversion idle, stopping reader

    16:42:20 #20 CDR -201 File WriterStatus.cpp, Line 184
    Invalid writestate

    16:42:20 #21 TRANSFER -18 File WriterStatus.cpp, Line 184
    Could not perform EndTrack

    16:42:20 #22 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    16:42:20 #23 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    16:42:20 #24 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    16:42:20 #25 Text 0 File WriterStatus.cpp, Line 232
    falling back to disc fixation

    16:42:20 #26 SCSI -1176 File Cdrdrv.cpp, Line 1186
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    16:42:20 #27 mmc -1176 File WriterStatus.cpp, Line 223
    Session fixation error

    16:42:20 #28 TRANSFER -19 File WriterStatus.cpp, Line 223
    Could not perform Fixation

    16:42:20 #29 Phase 38 File dlgbrnst.cpp, Line 1436
    Burn process failed at 10x (1,500 KB/s)

    16:42:20 #30 Text 0 File Scsicmd.cpp, Line 371
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
    File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
    File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
    File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Oct 9, 2005
    scuzz0, Oct 9, 2005
    #5
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    no worries.

    oops, because you've now posted more than one logfile section your serial number has crept in one or more times. edit them out via the pencil icon at top right of post, i have enough to go on now i think
     
    creaky, Oct 9, 2005
    #6
  7. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    lol though id only got thought it looked a bit big ill get rid cheers for letting me know
     
    scuzz0, Oct 9, 2005
    #7
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96

    - that's way too old, update (free) to 5.5.10.56 - i think it's the last 5.x update they released - http://www.softpedia.com/progDownload/Nero-Burning-Rom-Download-5419.html

    - firmware is up to date

    - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

    - there's one of your problems, you need to free up more memory by closing more programs prior to all burns

    - CD burning is usually very forgiving but i don't like the look of the 'CD manufacturer unknown'. try better media

    - see if ALL the other suggestions make a difference

    - sorry, i had to quote that again just for comedy value, it's a classic error!

    - you have no free memory left, see comments above

     
    creaky, Oct 9, 2005
    #8
  9. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thank you im gunna try them now ill keep you updated
     
    scuzz0, Oct 9, 2005
    #9
  10. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Heres my latest log it failed i did what u suggested, i struggled a little with the dma bit i can find DMA controller which i enabled both of them but cnt find a dma channel. The info u gave me was an xp and im on me. I still know how to access the device manager though ne ways ehre the latest log

    na
    na


    Windows 98 4.90 (ME)
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
    Nero Version: 5.5.10.56
    Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
    BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 32505856 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 191MB (196020kB)
    Free physical memory: 51MB (52684kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    Wizard: On

    9.10.2005
    CD-ROM (ISO)
    18:10:00 #1 Text 0 File Isodoc.cpp, Line 7604
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    18:10:01 #2 Phase 89 File dlgbrnst.cpp, Line 1655
    Super Link activated

    18:10:01 #3 Text 0 File Reader.cpp, Line 115
    Reader running

    18:10:01 #4 Text 0 File Writer.cpp, Line 125
    Writer BTC BCE2410IM running

    18:10:01 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
    First writeable address = 0 (0x00000000)

    18:10:02 #6 Text 0 File Burncd.cpp, Line 3773
    Turn on Track-At-Once, using CD-R/RW media

    18:10:02 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 339033 (339033) = #339033/75:20.33
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    18:10:02 #8 Text 0 File DlgWaitCD.cpp, Line 229
    Last possible write address on media: 359848 (79:59.73)
    Last address to be written: 339032 (75:22.32)

    18:10:02 #9 Text 0 File DlgWaitCD.cpp, Line 234
    Write in overburning mode: FALSE

    18:10:02 #10 Text 0 File DlgWaitCD.cpp, Line 1703
    Recorder: BTC BCE2410IM;
    CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    18:10:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder BTC BCE2410IM for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD not fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 694646784

    18:10:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
    Removed 2 run-out blocks from end of track 1.

    18:10:02 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 339033 (339033) = #339033/75:20.33
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 339031 blocks [BTC BCE2410IM ]
    --------------------------------------------------------------

    18:10:02 #14 Phase 24 File dlgbrnst.cpp, Line 1655
    Caching of files started

    18:10:02 #15 Phase 25 File dlgbrnst.cpp, Line 1655
    Caching of files completed

    18:10:02 #16 Phase 36 File dlgbrnst.cpp, Line 1655
    Burn process started at 20x (3,000 KB/s)

    18:10:02 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    18:10:02 #18 Text 0 File Mmc.cpp, Line 19546
    Set BUFE: Super Link -> ON

    18:12:01 #19 Text 0 File Scsicmd.cpp, Line 2085
    SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 02 6C 00 00 1F 00 00 00

    18:12:01 #20 CDR -1175 File Cdrdrv.cpp, Line 1361
    Internal trace
    Command timeout occured: timeout 90000ms, counter 1
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00


    18:12:01 #21 SCSI -26 File Cdrdrv.cpp, Line 1392
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03CB0000
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    18:12:01 #22 SCSI -26 File Cdrdrv.cpp, Line 1447
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03CB0000
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    18:12:01 #23 CDR -26 File Writer.cpp, Line 333
    SCSI/ATAPI command timeout error

    18:12:01 #24 Text 0 File ThreadedTransfer.cpp, Line 222
    all writers idle, stopping conversion

    18:12:02 #25 Text 0 File ThreadedTransfer.cpp, Line 216
    conversion idle, stopping reader

    18:12:12 #26 Text 0 File Scsicmd.cpp, Line 2085
    SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00

    18:12:12 #27 SCSI -1000 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    18:12:12 #28 CDR -1175 File Cdrdrv.cpp, Line 1259
    Internal trace
    Command timeout occured: timeout 10000ms, counter 1
    CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00


    18:12:12 #29 SCSI -26 File Cdrdrv.cpp, Line 1287
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x00 (0x02, SCSI_PENDING)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00

    18:13:31 #30 CDR -1000 File WriterStatus.cpp, Line 191
    SCSI/IDE error

    18:13:31 #31 TRANSFER -18 File WriterStatus.cpp, Line 191
    Could not perform EndTrack

    18:13:31 #32 CDR -201 File WriterStatus.cpp, Line 194
    Invalid write state

    18:13:31 #33 TRANSFER -18 File WriterStatus.cpp, Line 194
    Could not perform EndTrack

    18:13:31 #34 Text 0 File Mmc.cpp, Line 14537
    <BTC BCE2410IM > start Close Session

    18:13:31 #35 SCSI -1176 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    18:13:31 #36 MMC -1176 File WriterStatus.cpp, Line 233
    Session fixation error

    18:13:31 #37 TRANSFER -19 File WriterStatus.cpp, Line 233
    Could not perform Fixation

    18:13:31 #38 Text 0 File WriterStatus.cpp, Line 242
    falling back to disc fixation

    18:13:31 #39 Phase 38 File dlgbrnst.cpp, Line 1655
    Burn process failed at 20x (3,000 KB/s)

    18:13:31 #40 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
    File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
    File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
    File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00

    Registry Keys:

    ====== *** Nero-Burning Rom, History File *** ======
     
    scuzz0, Oct 9, 2005
    #10
  11. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Oct 9, 2005
    #11
  12. scuzz0

    scuzz0 Member

    Joined:
    Oct 9, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    i enabled dma and still mad no difference dont matter ill buy a new drive and hope for the best thanx for all your help its greatly appreciated
     
    scuzz0, Oct 9, 2005
    #12
  13. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    that'll probably sort it!, but just keep an eye on that memory...

    no worries, you're welcome..
     
    creaky, Oct 9, 2005
    #13

Share This Page