data is being updated 0% starview 3

No joy. Still getting message "data is being updated... [0%]" Also box restarts after 5mins approx.

 

I take it you are in Ireland? This is happening alot lately over here.
Try this,
Menu 1570
Turn emu off & exit to channels for about 20 secs.
Go back to the CAS menu & Set default key first.
Turn EMU on & exit to discovery channel. Wait for it to update.
If it doesnt update, turn the b0x off at the back for a min, back on & go to discovery channel.

 

@ noelyf
Still no joy. BTW I am in Ireland.

 

Go to bbc1 & see if it updates.

 

Perfecto!. BBC1 did the trick. Thanks for your help.

 

No bother, you`re welcome. Just have to keep at it & you`ll get it eventually

 

Why did it work BBC1 and not Sky Sports or Discovery.?

 

I dont know, i dont work for n*l lol.

Its been happening lately on certain starview boxes in Ireland.
It wont update on certain channels sometimes.

 

They just got lucky!!
Sometimes the box just needs a bit of messing around with and on this occasion it worked!! Nothing secretive bud!!

 

Hi noely I'm in Dublin too and have the Starview 4 Super USB, not sure if you know as much about these as Starview 3s.


I downloaded the chatterbox toolbar and loaded the file TheboxSuperUSB_V1.02_beta.BIN onto my box.
I then typed in 1570 at the menu screen and am taken to a screen with three options.
I was told to change key emu to on. My three options are 'Nagravision' 'Set default key' and 'key code'.
I changed 'key code' (as I presume this is emu) to on and exited back out and tried to scan automatically for channels on both Ntee L and coarus.
It appears to scan through channels for around 20 seconds and then says 'Info: no new channels'. It then jumps to the manual scan screen.
I also got key codes from a lad I know who has a eurvox box and changed these and tried to scan again. Same thing 'Info: no new channels'.
Any ideas on where I go from here?

 

I really have to get a new keyboard Noel LOL


this one is brutal LOL

 

Thanks all for your answers.

 

Do a factory reset & flash it with the v.102 in eamos.
Then switch your key code from off to on & exit out to channels.
Make sure all your connections are in properly & you are scanning from the main feed.

 

How exactly do I do a factory reset?
And by 'flash it with the V.102 from eamos' do you mean load on the V.102 bin file that's in the eamo's library link at the bottom of your signature?
Sorry if I need a bit of an idiot's guide!
Hail, Hail...

 

i think Noel is gone for his dinner!!

Factory reset.... press menu then you will see factory reset.. press it!!

You download the firmware from Eamos via a null modem cable and come back and we will tell you then what to do!!

 

Menu > factory setting
pin - 0000
ok to delete

TURN THE BOX OFF AT THE BACK FOR ONE MIN THEN TURN BACK ON

English > installation
choose provider
Auto scan > ok
Channels found
Exit.
Menu > 1570
Turn key code on
Exit exit exit.

You`ll find the firmware in eamos library under my sig.

 

Howya Des, nice keyboard, you`d wanna go easy on them smokes LOL.

 

Very clear instructions noely thanks.
Just one more thing though, at what point in the process do I install the new firmware?

 

When you finish the above, disconnect the b0x from the TV & put it on standby & then download the v1.02 via the usb stick.

 

Hi Des
Make sure you dont spill the bottle of gin on it.