Dbox In Ireland

There should be nagrarom 3,nagrarom 10 etc make sure you are in the var/keys folder,should be the same folder as the keylist.txt file.

 

Wiz569 just double checked and there is no nagrarom 3,nagrarom 10 etc in the var/keys directory. There is a nagra.txt file only.

Is there anybody in the Cork region that has is up and running on a 500c using a Evocamd emu....would they please file me in on there setup

 

guys im going to throw my dbox2 down the garden no im stressed out totally, i succesfully re flashed my dbox with commando 6 with new service and key files perfect all my channels came back....so me being me said il upload commando 8.2 the box loaded it up no channels so decided to flash commando 6 back did this succesfully ut no i rebooted the box and it wont go past the initial screen of teh soldier and load up i would appreciate any help is there away of reseting the box

 

Bad flash.
Use IFA and reflash the dbox.

 

for my image, filename Keylist.txt is case sensitive.
There are two Keylist.txt posted, only one of them works for me, its the one that contains:
N 5401 00 5B7436A3BA30CB46 ;ROM7 AU Key Time Thu Apr 3 20:12:07 2008
N 5401 01 08B4975BE2D9410B ;ROM7 AU Key Time Tue Mar 25 18:54:09 2008
N 5401 01 540D8109F96E17F9 ;ROM7 AU Key Time Thu Apr 3 19:34:34 2008
N 5401 00 5B7436A3B230CB46 ;ROM7 AU Key Time Thu Apr 3 19:34:44 2008

 

how do i do that man cheers

 

The saga is over ....just got it up and running.....

Originally posted by Dsleeper:

for my image, filename Keylist.txt is case sensitive.

Simple fix in the end....but a long time getting there....

Major Kudos...to oggnogg, wiz569, Scouser for all their wisdom and patience....it definately is a example of If at first you don`t succeed try and try again

 

Hi ALL
I cannot connect seem to connect to my dbox via the crossover cable to ftp the key file ,I have tried loads of combinations of ip but still cannot make contact .i have followed all previous posts with regards to ip address and settings,i have even bought a new cable thinking it was it but no ,i was told to "ping"the dbox but i dont know how to do this ,
Any help would be great as i am at this all weekend .
thanks .

 

If you use XP: Click start -> run. The type cmd in the field and hit enter. type Ping (and your dBox2's IP address, something like 169.254.1.2) and press enter. You will get a list of responses if your box is reachable. Otherwise it will say timed-out.

 

Ok for those of you still having trouble here is the blade image for n9l Dublin for DBOX2 its updated with all the new keys etc. Simply download it and stick it on you box.

For those of you who don't know how to do the sticking I have included a 'what you need guide', 'a how to do it guide' and the software required to get it done.

Hope this helps those of you that are a bit stuck.

I will add a blade c£$£$s image by Wednesday.

 

Code:

http://www.4shared.com/dir/6359690/99fe6a16/sharing.html

Sorry forgot to say the parental lock is active on this image to block out the settings menu and adult channels. The code is 1982 to unlock.

 

Back again.....well eventually got the DB500C up and running after spending the whole weekend at it...got it up and running....BUT!!!
After bout a hour I lost picture and sound again. I then went and FTPd the Keylist.txt file again and my picture and sound resumed....BUT!!! again after bout a hour or so it dropped its connection again....

Has anyone any idea what could be the cause of this and what could I do to fix this

 

It looks like autoupdate is enabled and write the wrong keys at top of your Keylist.txt.
Set the option A: {00} in the camd_cfg and restart evocamd.

 

Thanks for the information mgb17
It looks like autoupdate is enabled and write the wrong keys at top of your Keylist.txt.
Set the option A: {00} in the camd_cfg and restart evocamd.

I am using a DB500C and I do not see anywhere within the setup menus where I can do what you suggest above.

I would be grateful if you could give me some guidance on how I would go about

Set the option A: {00} in the camd_cfg and restart evocamd

 

You need to telnet into your box and edit the camd_cfg file.

Open a cmd window (go to Start | Run... and type cmd and press enter)
Type: telnet 192.168.1.13 (change the number to the IP of your box)
Type: cd /var/keys

Now you need to edit the camd_cfg file - I only use vi to do this and don't really fancy writing a tutorial on how vi works...

The file probably says 'A: {02}' change this to 'A: {00}'

 

hey guys,
I have been reading the differents posts all weekend everyone seems really clued up on the changing of codes and getting boxes up and running again. My box gave in last week too,i am a techno phobe of the highest order, this post is the most ive done... If someone can sort out my two boxes for me i can trade there help for Vip entrance and seats with drinks in the club i run. I live in the saggart area your help would be hugely appreciated. Thanks in advance.

 

grif353 i just sent you a private message

 

Guys ,
I have a Noki* dbox 2 with the digital worldz image. I have loaded in the keylist file but i still get nothing.

This has been wreaking my head all weekend , i cant offer drinks or vip access just thanks to anybody who can help.

by the way the digital worldz image is very good.

 

Check if evocamd is selected as emu. Keylist.txt is only for evocamd.

 

Also make sure in the roms that Nagra rom 7 is enabled and the rest disabled then go to the optoins in your menu and select flash partition (without bootloader)