Dbox In Ireland

ruprect · Apr 8, 2008

ddotsy said:

Cheers ruprect I'm up and running......great guide!!!
Click to expand...

Good to see you are running, I did not write the guide, scoopdog posted it a few pages page, dunno if he wrote it.

If people cannot see tuxbox after pressing blue, then go to service. key binding setup.
Now go to user menu blue.
Now go to a blank space and keep pressing Ok until you see "plugin",
now you shold have tuxbox available when you press blue.

On some images this is disabled, to prevent people messing with settings. If your boot screen is jim carrey from the cable guy it is likely to be disabled.

BISH · Apr 8, 2008

nice one ruprect great guide easy to follow works a treat

ruprect · Apr 8, 2008

mgb17 said:

UPC changed the keyroll method.
Click to expand...

Do you think a image could be easily created to solve this keyroll problem?

Scoopdog · Apr 8, 2008

ruprect said:

robio said:

what did u do to fix???
HELP the champions league is on tonight
Click to expand...

You already posted the fix! cheers, look at your starview code and the dbox update, only one digit is wrong, at the end it is D and should be 5.

you can go into tuxbox commander and change it as mentioned before.

A GUIDE ONLY FOR PEOPLE AFRAID OF PCS
If the D Box goes down and the only channels you have left are RTE 2, TV3 , Channel 6 etc., don’t do a service scan, if you do you will lose most of your channels and it makes it more difficult to get them back.

NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:

1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2
. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!

3
. When you find the VAR file and you press OK, scroll to Keys & press OK

4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:

N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008 and we need to change it to N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008

We are only changing one digit this time, in future you may have to change more digits.

7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!

8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.

9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.

10
. You should now have changed the code, to get back to the TV screen, press home.

11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!

THE ABOVE CODE IS WORKING FOR DUBLIN 12 AT THE MOMENT I'VE JUST CHANGED IT AND WORKS FINE
Click to expand...

Liam520 · Apr 8, 2008

Howdo you get the keylist when they change them, r they on the n*l box

alfredous · Apr 8, 2008

Respect, ruprect - you've put an end to the spinning in my head, for now! keep up the good work, it's much appreciated.

comis01 · Apr 8, 2008

Thanks MGB, just to confirm that the new codes you supplied for Cho*** are working, DM600 back in action Drogheda.

Cheers.

robbie67 · Apr 8, 2008

ruprect said:

robio said:

what did u do to fix???
HELP the champions league is on tonight
Click to expand...

You already posted the fix! cheers, look at your starview code and the dbox update, only one digit is wrong, at the end it is D and should be 5.

you can go into tuxbox commander and change it as mentioned before. The following guide was posted before, I just updated it with the new key that is giving problems

A GUIDE ONLY FOR PEOPLE AFRAID OF PCS
If the D Box goes down and the only channels you have left are RTE 2, TV3 , Channel 6 etc., don’t do a service scan, if you do you will lose most of your channels and it makes it more difficult to get them back.

NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:

1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2
. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!

3
. When you find the VAR file and you press OK, scroll to Keys & press OK

4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:

N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008 and we need to change it to N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008

We are only changing one digit this time, in future you may have to change more digits.

7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!

8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.

9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.

10
. You should now have changed the code, to get back to the TV screen, press home.

11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!

Now as I mentioned before I had blade and sporster running with autoupdate and they were fine, never changed back while commando did. My sporster image is still set to autoupdate. If it is stable set to autoupdate then it might be best to leave it like that, since it does seem only 1 digit will change at a time so it is very easy to fix.
Click to expand...

redkop · Apr 8, 2008

thanks ruprect back workin i heard they will be changin codes every 3 dars we will have to keep ahead of them

johnred · Apr 8, 2008

Thanks Ruprect, worked a treat in dub 5. A big thanks for the easy to follow istructions, much appreciated

ronin2009 · Apr 8, 2008

guys for any that just wants a drag and drop file

N*L = http://rapidshare.com/files/105938413/N_T_L_Keylist.rar

Ch*r0s = http://rapidshare.com/files/105938463/Ch0rus_Keylist.rar

DeCorkBoy · Apr 8, 2008

Hi every one, I've tried everything all the keylists and all the advice.
Is there anyone in cork at the moment with a working dbox who could help me.

markarman · Apr 8, 2008

thenks a million to everyone back up in d12

just 2 other questions

is there an auotupdate file i could add?

does anyone know what the keylist.txt file numbers mean?

thanks again to everyone

i can see this being a real pain in the butt changing the keylists daily

peds · Apr 8, 2008

My Replay Lite Digi box has been scrambled this evening by N*L.

Does anyone have the new settings.

Please help???

Peds

alfredous · Apr 8, 2008

Anyone know how to get around an issue like lost set-up PIN on DM500C (DW 1.6.5). For a friend, obviously! Thanks.

robio · Apr 8, 2008

ruprect said:

The keylist did not work for slunk but did work for you (robio)
please let me know what image you are both running. I think commando might only be reading the first 2 lines or something, and maybe other images are fine as long as the correct keys are somewhere in there.
Click to expand...

I'm Running Sportster 1.75 (2x)

eoinf · Apr 8, 2008

the changing the code worked for me , running sportster on N*l in dub 7/15

cheers all.

is this the future changing codes every few days

Scoopdog · Apr 8, 2008

robio said:

ruprect said:

The keylist did not work for slunk but did work for you (robio)
please let me know what image you are both running. I think commando might only be reading the first 2 lines or something, and maybe other images are fine as long as the correct keys are somewhere in there.
Click to expand...

I'm Running Sportster 1.75 (2x)
Click to expand...

N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008 and we need to change it to N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008
this is the current code change for nokia d box running on blade trinity final working in dublin 12

DufferBoy · Apr 8, 2008

Thanks for the reply and the two files mgb17

Upload both files to var/keys.
Restart evocamd or reboot your box.

http://www.4shared.com/file/43301180/136b63e6/keylist.html

Updated these to my DB500C all working in Cork

Mgb17 thanks for sharing your wisdom...major Kudos to you ...

Just hope the edit you did to the camd_cfg file will stop the issue I had with loosing picture/video every few hours.

Hopefully it is up for a bit this time...Thanks to all who share their knowledge on this excellent thread

anto1969 · Apr 8, 2008

Peds sent you pm only got your message now only back from meeting hope it helps.

Log in or Sign up

Dbox In Ireland

ruprect Regular member

BISH Regular member

ruprect Regular member

Scoopdog Member

Liam520 Member

alfredous Guest

comis01 Member

robbie67 Member

redkop Guest

johnred Member

ronin2009 Member

DeCorkBoy Member

markarman Regular member

peds Member

alfredous Guest

robio Guest

eoinf Member

Scoopdog Member

DufferBoy Member

anto1969 Regular member

Share This Page

Log in or Sign up

Dbox In Ireland

ruprect Regular member

BISH Regular member

ruprect Regular member

Scoopdog Member

Liam520 Member

alfredous Guest

comis01 Member

robbie67 Member

redkop Guest

johnred Member

ronin2009 Member

DeCorkBoy Member

markarman Regular member

peds Member

alfredous Guest

robio Guest

eoinf Member

Scoopdog Member

DufferBoy Member

anto1969 Regular member

Share This Page

Useful Searches