Dbox In Ireland

The directions aint for every image to update codes sodont be fooled

 

@ruprect
There are 2 different emm's in use for each rom version.
Depending which one arrives you, you get the wrong digit at a other position.
Beside that the discrambling job is done from the selected emu and not from a image.

 

I am not sure I understand. The numbers I saw being incorrect were the same on most dboxes, running evocam or gbox. Is this normal?

I am currently running blade trinity, evocam, 001A, AU{02} in camd_cfg, only ROM7 enabled. My keylist was getting new keys and then losing them. Now I have loaded on the following

N 5401 00 067AF388D22415F5 ;ROM10 AU Key Time Thu Apr 3 19:34:44 2008
N 5401 01 7375C3CC596DDFFA ;ROM10 AU Key Time Thu Apr 3 19:34:34 2008

and it is working fine for the last while. I just tried ROM10 to see if it worked. I now presume this does not matter.

Another sagem, andromeda 1.3, evocam, 0013, AU{02} in camd_cfg, only ROM10 enabled. This appeared to have gotten the correct codes. BUT that was turned on at around 6pm today, after the codes had changed. I am not 100% certain the codes were correct, maybe a new digit changed that I was not looking for very well. But I know ROM10 was mentioned by you (mgb17) before regarding these changes happening.

Now I wonder if I had enabled only ROM10 if it would have updated with the correct codes, then I could disable it and turn on ROM7 and be working OK.

I know very little about how the software works, I am just trying some things out.

 

ya have a point there why not backup your image with rom 10 and upload on my shared files for more to try

 

im running a sagem d-box 2 x1

i run spotster uk 1.7

im wandering if any of you will tell me how to put these codes in so i can get it running again

thanx in advance

 

Depends on the area your in plus you gotta think about updating check me link below

 

im in the west midlands bud

im now on my laptop and im looking through menus and i cant find anywhere to enter codes

 

ok got the keys

im 1 letter out on the 00 one...and the 01 is perfect

i cant see how the hell you change them tho

 

i have told it to get new public keys 3 times now...each time it gets 3 that start with 00 and one that starts with 01

01 is fine every time based on your new keys

but the 3 that start 00 all are the same as your new keys except 1 number on each ( all different)

 

WOOHOO...I F**KING DID IT AND IT WORKS

how long can i expect this to work


FYI...all you guys out there that are still stuck the codes did the job, took me 30mins of fiddling around having never had to mess with the menus before

anyone with a sagem2 that needs help i will gladly help you guys out

 

Hi All had all the chanels yesterday now have none but still have the epg whats going on anyone know help running com 6

 

I will have a go later. As mentioned teh 01 key always seems to come in OK.

So last night I went on evocam 001A only ROM10 enabled

N 5401 01 7375C3CC596DDFFA ;ROM10 AU Key Time Wed Apr 9 02:01:04 2008
N 5401 00 067AF388D224-0-5F5 ;ROM10 AU Key Time Wed Apr 9 02:01:04 2008

So I changed that "0" to "1" rebooted with only ROM7 enabled and it worked. Then the incorrect key was brought in since I was set to autoupdate. So now my keylist looks like

N 5401 01 7375C3CC596DDFFA ;ROM10 AU Key Time Wed Apr 9 02:01:04 2008
N 5401 00 067AF388D22415F5 ;ROM10 AU Key Time Wed Apr 9 02:01:04 2008
N 5401 00 067AF388D22415FD ;ROM7 AU Key Time Wed Apr 9 07:50:10 2008

So you can see the incorrect key is there, with the usual "D" at the end BUT the good one is still there and the box is working perfectly (Blade 4.0 AKA blade trinity final)

My camd_cfg is

What I find interesting is ROM7 keeps getting the same key and digit wrong. Now if I had say 3 roms enabled and they brought in the same 00 code with one digit wrong, then by a process of elimination I could figure out the correct code. Put the 3 incorrect keys under each other, and if the 3 keys have incorrect codes in different places then when one digit is wrong the other 2 will agree. Now if that could be done automatically it would fix the whole problem.

e.g.
ROM7 gives 1239
ROM10 gives 9234
ROM11 gives 1294

Then I can make the right code from those 3, look for 2 digits in agreement in the 3 lines, in this case the right code would be 1234

 

@ruprect
That's great! I was having the problem with my keylist file being updated with the wrong keys i.e. with "D" instead of "5" whenever auto-update was enabled - Now the question is would the right key be updated/added in the keyfile when auto-update is swtiched on if the right ROM is enabled (as per their emm's)..?

las comment/question, so should we assume th that "00" is for off & "01" for on, no?

 

hi, could someone please post the new key's for the wigan area??

thanks

 

Guys, I was just wondering if anyone knows what is going on with these box's lately? I was hours trying to get things fixed last night and I was nearly throwing the box out the back garden i was so frustrated.

Is this set to continue? Or is there a more stable box I can buy so it wont happen?

 

Can anyone help getting a Sagem dbox back up and running, thanks.

 

My Dbox 2 now up and running thanks to the keylist codes provided by darconio, im using a commando 8 image. i will be trying the keylist codes on a Sportster and Digitalworlds image and report back if i encounter any problems.

Thanks again guys, keep up the good work

Hope this helps

N 5401 00 067AF388D22415F5 ;ROM7 AU Key Time Tue Apr 8 17:56:46 2008
N 5401 01 7375C3CC596DDFFA ;ROM7 AU Key Time Tue Apr 8 17:49:14 2008
N 5401 00 067AF388D22415FD ;ROM7 AU Key Time Tue Apr 8 17:49:14 2008
N 5401 00 5B7436A3B230CB46 ;ROM7 AU Key Time Thu Apr 3 22:45:19 2008
N 5401 00 5B7436A3B238CB46 ;ROM7 AU Key Time Fri Apr 4 18:35:53 2008

 

Sorry in advance for the silly question.
How do I open up the camd_cfg file to edit it? Once I open it what is the recommended setting for Sportster 1.7 uk0.5 with NT> dublin?

Thanks lads, keep up the good work.

 

Is your commando set to autoupdate? you have both the right and wrong key in there, which is interesting. Is it commando 8.0? my 8.2 autoupdates incorrectly.

mgb17 has been saying change to AU {00}
You change it via remote just like the keylist.txt, the guide is posted many times on the last few pages.

However a few boxes running sporster have been fine on autoupdate. Leaving this on might mean it is easier to put in the new codes. I am testing mine today with all ROMs enabled.

 

mgb17 has been saying change to AU {00}
You change it via remote just like the keylist.txt, the guide is posted many times on the last few pages.[/quote]

However a few boxes running sporster have been fine on autoupdate. Leaving this on might mean it is easier to put in the new codes. I am testing mine today with all ROMs enabled.[/quote]

Thanks for that. I just figured out I need a text editor. A stepp learning curve this week. I used Edit Pad Lite which was free on the net.

My AU was set to 2. It was 1 in the last fix and I think 0 in the first file I changed, so I'll leave it at 2 for the moment to see how it fairs.

Thanks again.