Dbox In Ireland

Back on in cork your magic THANKS

 

thanks a million Darconio back workin in dub 22 now, i wonder will we have to do this on a regular basis or will n#l get fed up tryin to stop it

 

@darconio - THX, keys worked! (in Clonee/D15) ;-)

 

Thank you, these Cho4us Keys are working in North County Dublin

 

Found this info for corus in another forum from a guy called Philo:

Can't confirm as not on Corus

----------------------------------------------------------------
If the people are looking for the keys and they can do it manually, just change the 12th character in 00 ***********C**** for a 4
This works for me in Cork area

 

Does anyone have the latest codes for TW Motherwell/Uddingston/South Lanarkshire region?

 

lads the mods are going to get annoyed if we keep posting codes if you go to link below all the codes are here and are updated as they change, just check you have the right cable provider and country and away you go. I reccomend bookmarking this link its were i,ve been getting codes over the past year.


http://forums.afterdawn.com/thread_view.cfm/531363

 

"AU" is in the cmd_cfg file which controls updates of your keys, if it is "00" then it is turned off, see all diff settings below (currently set to auto-update with {02}:
# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: { 02 }

Now auto-update may work for some images i.e they get the right keys while others get "bad" keys & loose reception..

 

Are we getting any closer to a new Auto Updater?

 

thanks anto1969

 

drag and drop files

N*T*L = http://rapidshare.com/files/106190995/N_T_L_Keylist.rar

cH*R0S = http://rapidshare.com/files/106190883/Ch0rus_Keylist.rar

 

Im a total n00b to this dbox melarky. Looking for codes for the Lanarkshire/Motherwell area. Also, could anyone five me info on how to install these codes. Step-by-step instructions would be greatly appreciated as i don not have a clue what im doing lol

 

Finally got sorted!! New codes up and running in Dun Laoghaire. Thank you all so much for all your help. Still one question though...should I remove some of my 24 codes on my keylist.txt or just leave them?

Thanks again!

 

can any1 help i have a euro vox n sorted that out but my bro has a dbox 2 and has lost all the channels any1 know how to get em back n how to do it as it doesnt have keys like my euro vox

 

Cheers works for cor us kildare as well

 

That thread ends some time back in July 07. Are you sure the latest codes are being added there?

 

this worked for me to change codes manually on a dbox

A GUIDE ONLY FOR PEOPLE AFRAID OF PCS
If the D Box goes down and the only channels you have left are RTE 2, TV3 , Channel 6 etc., don’t do a service scan, if you do you will lose most of your channels and it makes it more difficult to get them back.

NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:

1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2
. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!

3
. When you find the VAR file and you press OK, scroll to Keys & press OK

4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6.
Now you need to scroll to the code that you are going to change, you can find codes at this linkhttp://forums.afterdawn.com/thread_view.cfm/531363


7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!

8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.

9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.

10
. You should now have changed the code, to get back to the TV screen, press home.

11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!

 

ok now that i have the codes... how do i enter dem?? i have a dreambox! thanks

 

the thread ended back in july alright but if you look at the dates over the codes you will see they are changed daily when they need to be

 

cheers anto m8 for that we will try that fingers crossed it works