Dbox In Ireland

Hi can someone confirm that the Commando9 fix is the correct one and it will auto update the keys etc.
Just a bit confused with all the posts

 

Hi,

I have updated my dboxes with the updated nagrarom7.bin and it seem to work fine except that the keys are not updating automatically. When the keys roll, I come back to find the channels blank and I have to tune to sky sports and leave it for 30 seconds. Then it seems to update the keys and everything works.

I have tried modifying my camd_cfg AU setting. I have tried A: { 01 } and A: { 02 } but this made no difference.

Any advice. My image is Cryogenics - Sportster 1.7+ uk05.

Thanks,

Nick

 

Originally posted by oliveoil:
--------------------------------------------------------------------------------
hi, flashed the new commando 9 image last night and tried rescan of channels but most I can manage to scan is about 56 channels....dont' get any of the irish channels or the usual terrestrials.....any ideas anyone???

--------------------------------
If you dowloaded the Commando 9 image from page 45 of this thread, then when you flash the image all the channels will be there already ie-you dont need to do a service scan(SWEET OR WHAT !!)

 

Originally posted by oliveoil:
--------------------------------------------------------------------------------
hi, flashed the new commando 9 image last night and tried rescan of channels but most I can manage to scan is about 56 channels....dont' get any of the irish channels or the usual terrestrials.....any ideas anyone???

--------------------------------
If you dowloaded the Commando 9 image from page 145 of this thread, then when you flash the image all the channels will be there already ie-you dont need to do a service scan(SWEET OR WHAT !!)
sorry page--145

 

hihas ne1 got the codes for sagem dbox t***w**t?
thanx in advance

 

so............

the box still isn't communicating with my p.c.

i got the boxes ip address from network settings on my pc, then put this new ip address into filezilla.
when i click on connect it doesn't get a reply from the box !!!!!

there must be a way to force a connection with the box to erase a bad image !!

commando 9 sux

any suggestions will be attempted with vigour

thanks in advance y'all

 

hi folks does anybody have the latest code for N*L box in dublin the latest code on my box as follows...
N 5401 00 A89517F7F1FDE25E5;ROM10 AU TIME FRI APR 18 18:08
N 5401 01 64ED70BF22851F2B ;ROM7 AU TIME FRI APR 18 18:08

PLEEEEEEASE

 

Sportster Pro 1.10 RC11

Hi everybody! This is my first post!!!

I have a Nokia dbox2 and i flashed the latest sportster image which is 1.10 RC11. I have my cables.xml, services.xml and keys etc but i can't get it to work. I think the problem is that the cam menu doesn't have evocam there so i can't select it. I know that this image hasn't been fully modded for UK/Ireland but does anyone know what needs to be done to get evocam installed??

 

Can anyone help, when I transfer Commando9 to my temp folder I then go Dbox/service/etc to flash without bootloader when I get to that section there is nothing in the file to select so I cant flash it.

 

cannot open network settings !!

cannot do anything with dbox

as above i got the new i.p. address by setting \my network adaptor to automatically find ip address.

however......

when i pinged this ip address all good no lost packet but .....

when i tried to connect using both filezilla and dnupman the box will not communicate with my pc, therefore the pc send a signal and waits for a rply eventually it times out !!!

anyone ???


anyone at all ??

hehe

thanks guys

 

I had the same problem yesterday when I flashed with Commando 9..

Make sure all firewalls and virus protection are off, then check your Dbox + Main Menu + Settings + Network.. Change your dbox IP to what it used to be with previous image.. And then FTP in like before.. Thats the way it worked for me..

 

If you have a null modem(essential)cable -
Flash image via Dreamup : it forces a connection and sets your IP at 192.168.1.100 - at least it did so for me on two different boxes. Good luck!

 

Guys.....thanks for all the great help so far.....I'm nearly there but need a little bit more help!

I managed to flash commando 9 and have most of channels back. However, some channels including some movie channels coming up not available and a lot of other very choppy sound and picture including the irish ones. Anybody any ideas or have similar problem????? On the home stretch now I hope!

 

N 5401 00 A89517F7F1 FDF 25E5
N 5401 00 A89517F7F1 EDF 25E5
N 5401 01 64ED70BF 2 2851F2B
N 5401 01 64ED70BF 3 2851F2B

Don't know which two lines are correct but the correct codes are contained within these four lines. Enjoy.

 

Make that

N 5401 01 64ED70BF 2 2851F2B
N 5401 00 A89517F7F1 FDF 25E5

 

Sorry, earlier flashing advice was for Dreambox 500C - forgot which post I was on!

 

Hi....anybody any advice on the above please!!!

 

any codes, am still down, the codes above dont work.

thanks in advance

 

C***** IRELAND 18th Apr 17:00 pm

00 - 48 3D B9 01 9F 9C F8 9D
01 - E2 69 08 F3 52 60 A6 C0

N*L IRELAND 18th Apr 17:02 pm

00 = A8 95 17 F7 F1 FD F2 E5
01 = 64 ED 70 BF 22 85 1F 2B

 

has there been any code changes tonight lads.. flashed new auto update image just wanna know has codes rolled since 7 tonight .