Hello there, i have an asus g73jh and it came with a dl dvd burner LG GT30N. The thing is that I burned a DL DVD once and only once he he, after that dvd every time I try to burn anything on a DL DVD i got different errors. I'm using nero, IMGBurn and UltraIso but I always get up to 50%, it just won't burn the 2nd layer, I upgraded the firmware to ASS2 and same problems, I tried with Ridata, Verbatim and Sony with the same results. The laptop is 6 months old and i can burn single layer dvd's just fine. I'm leaving the last log and maybe someone can give me some advice on what I can do. Hopefully it's something I can fix by myself because taking it back for warranty will be a pain in the butt he he. Thx! Log. Code: I 10:40:09 ImgBurn Version 2.5.2.0 started! I 10:40:09 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 10:40:09 Total Physical Memory: 5,165,620 KB - Available: 2,828,144 KB W 10:40:09 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:40:09 Initialising Patin-Couffin... I 10:40:09 Patin-Couffin - VSO Software - Version 1.37.0.0 - Internal Revision 37 I 10:40:09 Searching for SCSI / ATAPI devices... I 10:40:09 -> Drive 1 - Info: HL-DT-ST DVDRAM GT30N ASS2 (D:) (ATAPI) I 10:40:09 Found 1 DVD±RW/RAM! I 10:42:42 Operation Started! I 10:42:42 Source File: C:\Users\Leo\Downloads\IMAGE.dvd I 10:42:42 Source File Sectors: 3,827,488 (MODE1/2048) I 10:42:42 Source File Size: 7,838,695,424 bytes I 10:42:43 Source File Volume Identifier: DVD_ROM I 10:42:43 Source File Volume Set Identifier: ec67c000MS UDFBridge I 10:42:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:42:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:42:43 Source File File System(s): ISO9660, UDF (1.50) I 10:42:43 Destination Device: [0:1:0] HL-DT-ST DVDRAM GT30N ASS2 (D:) (ATAPI) I 10:42:43 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x) I 10:42:43 Destination Media Sectors: 4,173,824 I 10:42:43 Write Mode: DVD I 10:42:43 Write Type: DAO I 10:42:43 Write Speed: 2.4x I 10:42:43 Link Size: Auto I 10:42:43 Lock Volume: Yes I 10:42:43 Test Mode: No I 10:42:43 OPC: No I 10:42:43 BURN-Proof: Enabled I 10:42:43 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 10:42:43 Book Type Setting: N/A I 10:42:43 Optimal L0 Data Zone Capacity: 1,913,760 I 10:42:43 Optimal L0 Data Zone Method: Copied From Original Disc I 10:42:43 Set L0 Data Zone Capacity Succeeded! I 10:42:43 Filling Buffer... (40 MB) I 10:42:46 Writing LeadIn... I 10:43:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:43:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:43:03 Writing Layer 0... (LBA: 0 - 1913759) I 11:03:11 Writing Layer 1... (LBA: 1913760 - 3827487) W 11:03:14 Failed to Write Sectors 1917088 - 1917119 - Reason: Write Error W 11:03:14 Retrying (1 of 20)... W 11:03:16 Retry Failed - Reason: No Seek Complete W 11:03:16 Retrying (2 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (3 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (4 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (5 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (6 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (7 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (8 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (9 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (10 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (11 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (12 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (13 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (14 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (15 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (16 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (17 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (18 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (19 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write W 11:03:16 Retrying (20 of 20)... W 11:03:16 Retry Failed - Reason: Invalid Address For Write E 11:11:34 Failed to Write Sectors 1917088 - 1917119 - Reason: Write Error E 11:11:34 Next Writable Address: 0 I 11:11:34 Synchronising Cache... W 11:11:43 User opted to skip the 'Close Track/Session/Disc' functions. E 11:11:43 Failed to Write Image! E 11:12:06 Failed to unlock drive from exclusive access. E 11:12:06 Reason: RequestExclusivity = False. I 11:12:06 Exporting Graph Data... I 11:12:06 Graph Data File: C:\Users\Leo\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GT30N_ASS2_SUNDAY-31-OCTOBER-2010_10-42_AM_RITEK-S04-66_2.4x.ibg I 11:12:06 Export Successfully Completed! E 11:12:06 Operation Failed! - Duration: 00:29:00 I 11:12:06 Average Write Rate: 2,242 KB/s (1.6x) - Maximum Write Rate: 3,357 KB/s (2.4x)
LIGHTNING UK! - who authors ImgBurn, only uses Verbatim DL+R. http://forum.imgburn.com/index.php?showtopic=61 I would burn a project with one and post the log at the Forum. http://forum.imgburn.com/index.php?showforum=6
