Digivox in Ireland

It will stop the interuptions, the only thing is that the channel names may be different.
U need to download the software/firmware first.
get it at the eko.4 link under my post.
hit digivox then firmware and download 'v2600api bin'
then hit software and download' downloader10.exe '

 

Ello Main , under pressure ?

 

thanks a lot mainman. appreciated

 

Hi celtic mate, no just fillin in some time ..
ferg has an interesting post somewhere....

 

no worries mate, hope your sorted now ..

 

the rs232 cable is the problem.you need a null modem cable.the rs232 sends the signal on a straight connection. the null modem sends the signal on a cross over connection.the null worked for me.got a null modem cable from maplin

 

was just reading the posts here....i was just going to try upload the latest firmware onto my box using rs232 usb cable converter.....will rs232 not do the job? do i need a null modem cable?

 

You will need a null modem cable im afraid.
But hold off for now, it looks like there is a VM problem in UK !
That may be the reason for the trouble..

 

the digi vox will load the latest firmware with the rs232 cable as well have done this myself yesterday 10/10/07.the genuine starview i did with the nill modem cable.see if this helps

 

Main Man - i have just had another failure with my Digivox

there was a code update the other day you gave me that worked fine - now it has gone again

N*L is my region

Has there been another code update if so do you know them?

 

Codes are the same as on this link
http://forums.afterdawn.com/thread_view.cfm/531363]

There was a problem in uk with vm, so maybae thats whats wrong with yours !

 

Can you advise what the problem is in the uk and what is VM.

thanks

 

Not sure but if you check this link out it may explain all for u .
http://status-cable.virginmedia.com/vmstatus/summary.do

 

Hey all! Got a Digivox recently but I'm having problems.

Ok so I have cable box in my place, square white one with TV and FM on it, doesn't say anything else. When I connect it to the TV I get some channels (TV3 and BBC cos there free) and a good few other cable channels which I can hear perfectly but the display is all scrambled, verticle lines with the colours of the display. (I assume its the encoding from NTL, tis why you need the decoder)

Anyway, I connected it to my Digivox and I searched automatically with NTL, Telewest, EX C&W and OM but nothin gets picked up and I dont know why.

I have a new F cable going from the box into the Digibox in the Pay TV Cable Input.

Do I need to upgrade the Firmware? I ordered in a Serial to USB so could because I have the serial cable, came with the Digivox (also downloaded the downloaded and the V2600 fireware) but I dont know, will this fix the problem?

My current Digivox system information is....

Can anybody help me please? Thanks!

 

Sorry for double post!

BTW, the scramble looks like this...

http://www.cl.cam.ac.uk/~mgk25/tv-crypt/image-processing/r-vc1.jpg

 

U will have to put cable into 'RF IN '(or 'cable in' )in at back of digivox.
then run scart from back of tv to digivox.
click on my name and on the left u will see my digivox tutorial.
Make sur u autoscan in on your area provider .

 

hi just done a rescan on my digvox now got jack shit on it has anyone else got this problem ive put in the new codes need help lads help please

 

Did u turn EMU on ?

 

ya bud tryed everything

 

Are u in the uk on VM ?
There are problems in certain area's