For all who need help with digiVox's here is a tutorial for set up ! How to Load Firmware. 1. Insert CD 2. Save all files into a folder or onto your desktop. Drag and drop 3. Remove CD 4. Turn off PC. 5. Connect PC to Digivox via the serial port using an RS232 cable. 6. Turn on Digivox & then turn on PC. 7. Open loader software “DOWNLOADER 10” 8. Check settings and parameters. Defaults are usually correct. 9. Browse for bin file (digivox_z20070101_v2500_api ) For all files and the downloader 10 click this link http://eko.4shared.com/ and hit digivox and select. 10. Check “app file” (default). 11. Click “download” 12. A progress bar will appear. Wait for “download complete “ window to pop-up 13. Turn off Digivox and PC then disconnect. Enabling Key Emulator 1. Connect Digivox to TV (usually scart), cable feed and power on. 2. Perform full auto-scan. 3. Go to “main menu” 4. Scroll down to “System Information”, press “OK” to enter System Information menu. 5. On your remote control press “ 1 0 0 4 ” (ignore what happens on the screen) 6. “Key Emu” will now be visible on the screen. 7. Change “Key Emu” to ON 8. Exit menus and return to TV mode. 9. Go to a scrambled / encrypted channel and wait for update process to complete. 10. Scrambled channels should now be unlocked. Problems with no sound To get back sound on e4 sky1 ect just select the channel in question press menu, select installation, select manual scan, click ok on down frequency. It'll now scan for channels when its finished exit back to normal tv viewing screen go to the end of your channel listing and the desired channel will be there with sound. This can be done on any channel with no sound by just selecting that channel following the instructions above.