I have successfully been burning dvds and for the past week or so, most, but not all of the movies that i have tried to back up give me this message after burning them. I use anydvd in the back ground and have tried both clone and shrink. One was Hoodwinked and one was an older movie, 10 things I hate about you. So I dont think it is the encryption. I have a tsst burner and have tried to see if there is a new firmware version out there and can not find one. There is no way to booktype this either. I use verbatims and Ty's for my media. Any clue as to why all of a sudden i would have this message?
here is my last nero post....maybe this can shed some light...thanks to any who might respond.......... 1A20- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero API version: 6.3.1.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TI51 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 487MB (499328kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.5.2006 NeroAPI 3:07:33 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 3:07:33 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 3:07:33 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 3:07:34 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 3:07:34 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 3:07:34 PM #6 Text 0 File Writer.cpp, Line 124 Writer TSSTcorp CD/DVDW TS-L532A running 3:07:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:07:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:07:34 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-At-Once, using DVD media 3:08:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2119807 (471:04.07, 4140MB) 3:08:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 3:08:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:08:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 3:08:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2119808 (2119808) = #2119808/471:4.8 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2119808 blocks [TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 3:08:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4341366784, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2119808 | lead-out | 1 | 0x00 | 0x41 3:08:14 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 3:08:14 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 3:08:14 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 3:08:14 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 4x (5,540 KB/s) 3:08:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:08:15 PM #21 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:08:15 PM #22 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 3:23:17 PM #23 Text 0 File WriterStatus.cpp, Line 115 <TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 2119808 (205880h), lenght 0 blocks 3:23:17 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:24:03 PM #25 Phase 37 File APIProgress.cpp, Line 273 Burn process completed successfully at 4x (5,540 KB/s) 3:24:04 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 3:24:04 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye.
OOPS..........disreguard this..double post(sorry) here is my last nero post....maybe this can shed some light...thanks to any who might respond.......... 1A20- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero API version: 6.3.1.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TI51 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 487MB (499328kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.5.2006 NeroAPI 3:07:33 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 3:07:33 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 3:07:33 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 3:07:34 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 3:07:34 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 3:07:34 PM #6 Text 0 File Writer.cpp, Line 124 Writer TSSTcorp CD/DVDW TS-L532A running 3:07:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:07:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:07:34 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-At-Once, using DVD media 3:08:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2119807 (471:04.07, 4140MB) 3:08:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 3:08:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:08:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 3:08:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2119808 (2119808) = #2119808/471:4.8 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2119808 blocks [TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 3:08:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4341366784, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2119808 | lead-out | 1 | 0x00 | 0x41 3:08:14 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 3:08:14 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 3:08:14 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 3:08:14 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 4x (5,540 KB/s) 3:08:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:08:15 PM #21 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:08:15 PM #22 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 3:23:17 PM #23 Text 0 File WriterStatus.cpp, Line 115 <TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 2119808 (205880h), lenght 0 blocks 3:23:17 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:24:03 PM #25 Phase 37 File APIProgress.cpp, Line 273 Burn process completed successfully at 4x (5,540 KB/s) 3:24:04 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 3:24:04 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye.
Try to install ASPI from here http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm, I will ask to have this transferred to Nero.
again i made an error in the log [27.05.2006]------------------------------------ 15:30:59 Robot error messages from: ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero API version: 6.3.1.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TI51 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 539MB (552724kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.5.2006 NeroAPI 9:24:38 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 9:24:38 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 9:24:38 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 9:24:39 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 9:24:39 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:24:39 PM #6 Text 0 File Writer.cpp, Line 124 Writer TSSTcorp CD/DVDW TS-L532A running 9:24:39 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:24:39 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:24:39 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-At-Once, using DVD media 9:27:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2118911 (470:52.11, 4138MB) 9:27:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 9:27:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 9:27:15 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 9:27:15 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2118912 (2118912) = #2118912/470:52.12 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2118912 blocks [TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 9:27:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4339531776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2118912 | lead-out | 1 | 0x00 | 0x41 9:27:16 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 9:27:16 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 9:27:16 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 9:27:16 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 4x (5,540 KB/s) 9:27:16 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:27:16 PM #21 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:27:16 PM #22 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 9:42:19 PM #23 Text 0 File WriterStatus.cpp, Line 115 <TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 2118912 (205500h), lenght 0 blocks 9:42:19 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:43:05 PM #25 Phase 37 File APIProgress.cpp, Line 273 Burn process completed successfully at 4x (5,540 KB/s) 9:43:06 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 9:43:06 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [27.05.2006]------------------------------------ 21:24:38 Robot error messages from: ====== *** NeroAPI, History File *** ====== ...i think this is the correct log
ok...i did download the file and unzip it...should i try to burn a movie or is there a way to tell what the problem was and if this fixed it...thanks for your help
JUst try another burn and see what happens. You know the strange thing is that each of these 3 logs indicate that the burn was successful.
Gwen...did you know that the second option you gave me to upgrade to was an earlier version than i already had... I downgraded to it...will check in the morning to see if this helps....its 3 am and I got to go to bed...thanks
thread teleported to relevant forum. - burner is only being detected generically so burns will be hit and miss (mostly miss)
I have not had this problem untill now, have burned many, many movies up to this point, is there a something i can change to make the burner not auto detected?
I have done that and still got a bad burn with the same message: Here is the log ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero API version: 6.3.1.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TI51 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 539MB (552724kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.5.2006 NeroAPI 9:24:38 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 9:24:38 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 9:24:38 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 9:24:39 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 9:24:39 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:24:39 PM #6 Text 0 File Writer.cpp, Line 124 Writer TSSTcorp CD/DVDW TS-L532A running 9:24:39 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:24:39 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:24:39 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-At-Once, using DVD media 9:27:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2118911 (470:52.11, 4138MB) 9:27:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 9:27:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 9:27:15 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 9:27:15 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2118912 (2118912) = #2118912/470:52.12 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2118912 blocks [TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 9:27:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4339531776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2118912 | lead-out | 1 | 0x00 | 0x41 9:27:16 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 9:27:16 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 9:27:16 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 9:27:16 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 4x (5,540 KB/s) 9:27:16 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:27:16 PM #21 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:27:16 PM #22 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 9:42:19 PM #23 Text 0 File WriterStatus.cpp, Line 115 <TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 2118912 (205500h), lenght 0 blocks 9:42:19 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:43:05 PM #25 Phase 37 File APIProgress.cpp, Line 273 Burn process completed successfully at 4x (5,540 KB/s) 9:43:06 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 9:43:06 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [27.05.2006]------------------------------------ 21:24:38 Robot error messages from: ====== *** NeroAPI, History File *** ====== I am wondering if i just need to take it to Best Buy and get them to send it in for repair? I have an extended warenty with this laptop, but when i called this am they said it could take up to 4 weeks to get it back....YUCK...am considering maybe an external burner as an option to having to send it in.....any advise
I understand that, but when i downloaded the nero update last night, and tried the burn this am, and the version, when i check it shows to be the updated one. I am sure this is confusing...but none the less , this is what it shows....i will be more than happy to try another burn and see what it shows now...if you would like One thing Gwen pointed out lastnight was that it shows a successfull burn, but the message comes up when trying to play it
OK, so according to your log file the burn was successful but now that is something completely different..you say the message comes up when you try to play it, what is the EXACT message and what are you playing the finished DVD with. This could and probably DOES imply that your standalone player doesnt like the format of the disc, it may be PAL whereas it needs to be NTSC or vice versa. It may be that your player doesnt play AVI files or something like that.
the exact message is "Disk with an unsupported format is in Drive E" and up untill 3 days ago, no problem burnig. Have burned almost 800 dvds with little problems using CLone, anydvd and shrink. I have dvd decrpter and dvd fab but dont use them as often. I am using my laptop to play them back but they will not play on my stand alone either. I have not changed media but it is possible that i amy have inadvertly changed a setting in nero or shirink or decrypter. I was looking to change booktype. And to make sure my firmware was up to date...which there is no new firmware out so couldnt change that. The first sign of problems were non susscessful burns...about 3 followed by a couple of good ones then a few bad and one more successful one and now...all are bad....Hope this infor helps
