DMA/CRC error with nero and tsstcorp t552u

Surely the quality of the dvds isn't causing the error as I can use these fine on my other pc?

 

it was gving the dma error when I was using ridiscs too, so it doesn't seem like its the discs but I'll try some different ones today.

 

I've just had an error report in alcohol, its:
Logical Unit Communication CRC Error (Ultra-DMA/32)

Is that any help?

 

Sorry to jump in, I'd figured my buddy creaky the Nero-nator should be able to help you tweak through this. However, I just want to throw in one more concern; the above error means that your burner is going down south. Try to disconnect the cable from the back of your burner, then plug it in back on. Make sure everything is placed in properly and tight. Try to burn again, if the above message/error "KEY_HARDWARE_ERROR" display again, then unfortunately it may be your burner that is going bad/south.

Also, it looks like you don't have any "existing drivers" at all. You should at least have one or two "under" existing drivers. Example for reference below:

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)

Below is an example/successful burned log, taken from mine that I'd recently burned. You can compare mine to yours and you'll notice the "Existing drivers" that I'd mentioned.

====== *** Nero Burning ROM, History File *** ======
David X
Home
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <=============== (SERIAL EDITED)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2

Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 588MB (603044kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.3.2006
UDF/ISO compilation
10:56:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started

10:56:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)

10:56:26 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:56:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted

10:56:26 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

10:56:26 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

10:56:26 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running

10:56:26 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:56:26 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:56:26 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

10:56:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2274255 (505:23.30, 4441MB)

10:56:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

10:56:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

10:56:27 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:56:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2274256 (2274256) = #2274256/505:23.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274256 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:56:27 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4657676288, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2274256 | lead-out | 1 | 0x41 | 0x00

10:56:27 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:56:27 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:56:27 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:56:27 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

10:56:27 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:56:27 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)

10:56:27 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:56:27 PM #24 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

10:56:27 PM #25 Text 0 File DVDR.cpp, Line 6222
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:56:27 PM #26 CDR -1207 File DVDR.cpp, Line 5649
Book Type automatically set to: DVD-ROM

10:56:27 PM #27 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

11:04:23 PM #28 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2274256 (22B3D0h), length 0 blocks

11:04:23 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:04:53 PM #30 Text 0 File DVDR.cpp, Line 6222
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0

11:04:53 PM #31 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Thank you, the drivers are microsofts own.

I can't find ny drivers for it and the samsung site doesn't have any.

 

I advised you this earlier in the thread but you said it was NOT a Samsung

heres the link AGAIN
http://forum.rpc1.org/dl_firmware.php?download_id=2011

 

I never said it wasn't a samsung and my firmwares upto date.

 

Its working now, I put it on another channel and it works fine.

Thanks for all the help guys, you rock. :thumbsup:

 

Im going to keep this thread linked in my homepage. It shows a good log of what NVIDA drivers look like, and the nexts logs shows what nero logs look like without them installed. Good work everyone!

 

hi all can anyone help me on my problem please i get this when trying to burn to disk sometimes its fine but most of the time it will not burn


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.18 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : XK1284K LOG300S 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4481B D: CDRom0
_NEC DVD_RW ND-2510A E: CDRom1
XK1284K LOG300S F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 476MB (487428kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.3.2006
NeroAPI
20:48:25 #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

20:48:25 #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

20:48:25 #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

20:48:25 #4 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 500, Book Type selected in EEPROM, command version 2

20:48:25 #5 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 500, Book Type selected in EEPROM, command version 2

20:48:25 #6 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

20:48:25 #7 Text 0 File Reader.cpp, Line 124
Reader running

20:48:25 #8 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-2510A running

20:48:25 #9 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

20:48:25 #10 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

20:48:25 #11 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

20:48:25 #12 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

20:48:26 #13 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 971583 (215:54.33, 1897MB)

20:48:26 #14 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO

20:48:26 #15 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

20:48:26 #16 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:48:26 #17 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 971584 (971584) = #971584/215:54.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 971584 blocks [E: _NEC DVD_RW ND-2510A]
--------------------------------------------------------------

20:48:26 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: _NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1989804032, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
971584 | lead-out | 1 | 0x41 | 0x00

20:48:26 #19 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:48:26 #20 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

20:48:26 #21 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

20:48:26 #22 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

20:48:26 #23 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

20:48:26 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:48:26 #25 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

20:48:26 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

20:48:26 #27 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

20:48:26 #28 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:48:32 #29 Text 0 File Cdrdrv.cpp, Line 1195
20:48:32.343 - E: _NEC DVD_RW ND-2510A : Queue again later

20:48:52 #30 SPTI -1106 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0c100000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

20:48:52 #31 CDR -1106 File Writer.cpp, Line 302
Power calibration error
E: _NEC DVD_RW ND-2510A

20:48:52 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:48:52 #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:48:52 #34 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1

20:48:52 #35 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 8x (11,080 KB/s)

20:48:52 #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

20:48:52 #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

20:48:56 #38 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 500, Book Type selected in EEPROM, command version 2

20:48:56 #39 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 500, Book Type selected in EEPROM, command version 2


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 19/01/2006 12:05:36 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

@doc1978
It probably would have been better to start a new thread as this one is getting a bit long, but i will tell you what i see in your log.
I see two main problems. DMA and Media.
The DMA is OFF for this drive:

It should be listed as ON. Here is how to fix that:
http://forums.afterdawn.com/thread_view.cfm/260038

The other main part is it doesnt like your TDK media. Let me check to see if you need a firmware update for that drive. No, it is up to date, so the only other thing to do is to use some other media. Try some verbatim. Or taiyo yuden found under Sony, Maxell, or Fuji, if made in japan is on the label.
Also you are using an old Nero 7 version. The latest version is not buggy like the last couple of 7 updates, so you should be ok with an update to 7.0.8.2
http://ww2.nero.com/nero7/enu/nero7-up.php

Those are the main things wrong in that log from what i can see. You might try a slower burn at 4x, but i dont think it will help as long as you are using that TDK media.

 

1st i wanted to say thankyou for the quick reply,2nd iv followed the link you gave, followed all the instruction's there,ok now i ran the nero info tool and i see this


Primary IDE Channel
Master:HL-DT-ST RW/DVD GCC-4481B
DMA on
Autorun on


Slave:_NEC DVD_RW ND-2510A
DMA off
Autorun on

Secondary IDE Channel
Master:ST3160023AS
DMA on

Unknown Adapter
ID 0 (0):XK1284K LOG300S 1.0
Autorun on



ok with the Slave:_NEC DVD_RW ND-2510A it says DMA off any idea how to turn it on please i have looked every where on my pc but can not see where i can turn it on,again many thank's for your quick reply

 

In my reply i linked to alkohol's DMA turn on guide.

http://forums.afterdawn.com/thread_view.cfm/260038

You need to un-install the driver for that drive, and reboot system. When the pc boots back up, windows installs the driver, and it fixes the DMA. When your drive goes out of DMA mode it can switch to PIO mode. That mode uses the CPU mostly, and it is very slow. Just follow alkohol's guide (it has pictures) and that should fix it for you. (there isnt an on/off switch for the DMA) it has to be fixed the way alkohol showed in that guide.
You need to go into control panel just like the guide showed, and un-install the driver for the DVD/CD rom drive, in your case the NEC one. Once you do that and reboot, that should be all it takes to get your DMA back on. Post back if that doesnt work.

 

hi me again,ok done everything you and alkohol have said do,but am still getting this




Primary IDE Channel
Master:HL-DT-ST RW/DVD GCC-4481B
DMA on
Autorun on


Slave:_NEC DVD_RW ND-2510A
DMA off
Autorun on

Secondary IDE Channel
Master:ST3160023AS
DMA on

Unknown Adapter
ID 0 (0):XK1284K LOG300S 1.0
Autorun on

again many thanx for your time sry to be a pain

 

What I found useful was to change the drives to different positions on the ide channels that fixed my problem.

 

thanx Ashleigh thats exactly what iv done problem solved thx alot people

 

Your welcome, Glad I could be helpful.

^_^

 

Ive seen stubborn DMA problems require removing the battery on the motherboard in one case to get it to come back on. I am glad you got it fixed with Ashleigh's help. Way to go Ashleigh Keep up the good work.