Dreambox 500T 500C Fixes here

Hi there
Just a quick question as I'm a newbie! Will it be the case that these codes will constantly need to be changed everytime N*L make changes?

r

 

not tried myself but apparently the image does work.
(and i do not doubt it)

i was told:-

when using the null modem cable method when it asks to perform a flash erase click no.

according to whizkid 9 thats the newbie mistake people are making. thats not to say i solved this myself as i know nothing... lol

gonna try it myself soon

thanks chris i will post my thanks when i have managed to test myself.

good luck

long live the cable guy !!

mark ..

 

hey cgscott im from Dublin ireland and done what you said and the screen is still blank and when i go into the keys there is only one rom7 did i do something wrong

 

cgscott u are a legend i now know where i went wrong and it is now working but will wait till code changes thanks again

 

Is it me or have V****M**** blasted the keys again?

 

Is there anywhere else I can get the images?

 

-----------------------------------------------------------------

Thanks for help Mark. I was clicking yes to flash erase. Sorted now, happy days.

 

New image is working fine, much better than the last, I will reitterate the message that has appeared on here a few times and I make no appoligies for it!

cgscott is a legend

 

Please mention what you did wrong in case other prople are doing the same.

Cheers

Chris

 

FRESH INSTALL IMAGES I PROMISED


Ok Guys. Heres images for both null modem and flash wizard.

This is a fresh image not a backup of my box.

I started from scratch so it is just a working image.

The images have autoroll and have scanning for every service provider.

Once installed it will ask you to do a scan. There is a list of diffrent scan i.e uk, ntl ireland etc

Make sure you scan your area.

Once you have done this. select a channel wait at least 1 minute if the channel does not start press the blue button and press ok on evocam 2.12. This will start the cam. And you will get your channels.

This is a fix for everyone and especially the irish boxes so that you dont have the double channel problem

Nullmodem Image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html


Flash Wizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

I have flashed a box using both methods and can tell you now that they work.

Tested myself. So guys get Loading.

 

Does anybody know how to manage my bouquets through my PC using a serial Null Modem Cable Please?

 

You cant has to be ftp.

 

Can anybody give me a step by step tut as to how please?

 

Try searching the web. We dont all have time to play on this all the time. I spent a week trying to sort boxes. Aint got time for step to step tutorials.

Start here.

http://www.ftpplanet.com/ftpresources/basics.htm

 

Dreambox edit http://members.chello.nl/a.wijers/dreambox/db_index.html

 

New tutorial

1. You will need relevant software so that your box can be fixed properly.

Dream up, Flash Wizard. Dreambox Control Center. Extract the file and autorun the program. A small box will appear with the relevant software.

http://rapidshare.com/files/109770655/DreamboxForEver.rar.html



2. Now you need this image i have FULLY WORKING! This is a flash wizard file and need to be flashed through the flash wizard program or through Dreamup . PLACE THIS IMAGE ON YOUR DESKTOP. EASY TO FIND.

Flash Wizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

Null Modem Image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html

3. Now that you have downloaded the WORKING IMAGE. Connect to your dreambox via DCC. You will need your Dreamboxes ip address for this. If you do not have it and have an image already on you box. Go into the setup, expert, communications. Your ip address will be in here.


4. Once you have connected to the dreambox. Open Flashwizard. Go into configuration and ultilies at the bottom of the box. Make sure the ip of the dreambox is the same as the one in dcc. It should be. If not change it.

Now Click Install a Firmware to flash memory. Now you will need my WORKING IMAGE. You downloaded above. Click the open folder tab. Browse for the image. Should be on your desktop as instructed above. Click open.

The image should now be visible in the box.

Now click flash image backup. This will install the image to your box.
Takes approx a minute.

Once completed reset the box. PLug into ur tv. And try.

It should now show that the flash is installed.

Do the scan using your area. For example Uk or ntl ie etc.

Once the scan has finished check your channels. TRY SS1 FIRST. If you dont have the channel. Reboot box. This time the evocam should startup and will roll the channels.

This is the simplest way to install this image. If this doesnt work or you have problems connecting to your dreambox you will have to go down the null modem route. Please leave me a message if you have problems with this.

Null Modem Fix:


You will need a program called dreamup.

http://www.dream-multimedia-tv.de/download/DreamUP.zip

Then download the image. The null modem one. Save this to desktop.

You need to plug the null from the box to pc.

With the dreambox switched off start up dreamup program.

Then untick use network box. Then click connect. Startup the dreambox.

It will connect. The flash box will then open. Click this it will ask for image. The image you downloaded open that. Then it will flash the image to your box. If asked to flash erase click NO!

Then flow the rest of the procedure mentioned in previous posts.

Thankyou

Chris

 

Hi,
Thanks for the information, i downloaded and managed to flashed my box with your image.
however still i am unable to view SS1 and other channels.

i got c .. w. your advice is greatly appreciated.
tanks
eel

 

BIG ANNOUNCEMENT

OK guys i want to to say a VERY BIG THANK YOU to CGSCOTT
for all his help and patience with sorting out the problems with me and my friends box. Its has taken a while for my friends wife to do it but CGScott has been so patient.
so Chris this is for you
enjoy coz me finks you deserve it for all the sh!te you have ben thro over he last few weeks.

 

Thanks for that!

He`s spent hours on this.

More please forum users.

 

Would also like to give a big shout out to cgscott, fair play to you mate. The bloke went out of his way to help me get mine sorted aswell. Am sure I wrecked his head, but he still helped me.

Thanks Again