Dreambox 500T 500C Fixes here

Will do, Thanks just wasnt sure if worked on the 500t on the mmds system

 

HI THERE,

MAKE SURE YOU HAVE THE FLASH WIZARD IMAGE IF YOUR USING AN ETHERNET CABLE,
YOU WILL ALSO NEED A FLASH PROGRAMME, I USE FILEZILLA.
MAKE SURE ALSO HAVE A CROSS OVER ETHERNET CABLE OR THAT YOU USE A HUB OF SOME SORT.

BUT AGAIN TO REPEAT THIS HAS ALL BEEN EXPLAINED FAR BETTER BY CG SCOTT AT SOME STAGE IN THIS THREAD.

HAVE A READ BACK AND SEE WHAT YOU CAN SEE TO HELP.

BEST OF LUCK

MARK ..

 

Hi,

Just wondering if the new image is the the same as the old one but with new roms? Could i just replace the old roms with the news one that are on the big thread on here somewhere(called thursday 18/12/09)?

 

cg scott will have to answer that one for you, but it doesnt look the same,

good luck

 

hi i have tried to change the key codes but i don not have a keylist.txt file under var/keys/keylist.txt
i used have a tuxbox system where you could enter keys manually but when this was upgraded to autoroll now i cannot find the keylist .txt please help

 

Oops. So I downloaded the latest image from megaupload and eventually successfully connected to my Dreambox 500c using a crossover cable and Dreambox Control Centre. In the DCC tools menu I selected the image for "update flash image" and then executed it.
Now my DB will not even boot - it powers up, shows the digital kaos logo then shuts down and repeats. I cannot even access the box menus or establish a LAN connection anymore. Have I killed my poor box? Any suggestions how to fix this would be appreciated....

 

mate, you have totally fucked it up lol

you flash the image via a null modem cable and using dream up software

what you have done is use the FTP method via DCC, for this you just need to copy files across from your C drive to the relevant VAR folder on the dbox.

 

Will Chris Image backup.img work for a dreambox 500C.

Do i just need to connect a numm modem cable and flash it. Do i need any keys?

 

Try pressing the yellow button to get to tuxbox commander

 

I have loaded the Image from this message, i have done a Scan and all the Channels are on the system but only a few work.
Any tips ?
FH

 

Have flashed two boxes successfully (with Chris's image) but my brother's box (which had a different original image) won't work. Scanning with Bruteforce UK and NTL plus NTL cable ire and picking up nothing, mostly no valid transponder. Ideas anyone?

 

stibbler you`ll have to now flash via the null modem cable

 

Hi Guys,

I'm in Louth and have MMDS System, tried what chris said about scanning and putting on premium station and pressed info and rebooted box but nothing worked, how do I edit the codes again in keylist.? Can't remember.

CelM

 

I went into Tuxbox and went to Bin and hit Backup Image and somehow the TV is back.
FH

 

Thanks phase, been reading up on it since & figured that that was the only answer. Have to wait until tomorrow to buy one (null modem cable). Kicking myself.

 

Alright Lads i've reflashed the box with the Kaos image, however i did do a flash erase of the old image, i restarted the cam and nothing happens i still only have two or three stations, have they updated again or am i missing something?? ANy ideas??

 

Hi folks, I have bought a null modem cable and connected the box to the pc. Using version 1.3.3.4 of Dreamup I am following the instructions. It says to hit connect on the dreamup and then turn on the dreambox and then.........I am left waiting and waiting. it's not progressing! What the heck now?

 

Same is happing to me. Do you get Sky Sport Xtra working?
I am based in Dublin.

 

A big thankyou yet again Chris thanks amillion for sorting out the fix brilliant mate!

 

stibbler make sure you buy the correct cable, they are not all the same!
http://cgi.ebay.co.uk/Serial-Null-M...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318