Dreambox Ireland N2 Fix. Its Here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@Wolfkid7

The Hypercam fix is only for Enigma1 boxes - the DM800 is Engima2.

I'll PM you the details when I get a moment. I've just been through this with my DM7250 which is the same system, just not HD.

 

Thanks mhill7895 !!

Catch you later !!

 

Hi folks,

I have a Dream DM500-C which a friend of mine has previously tried to flash, but clicked Yes on the flash erase prompt. I have the box hooked up to my laptop and ready to go again. Do I now need to restore a file that has been erased? (If so, could someone give me an idea where to find said file?) Or if I just flash it again and click no, will it work?

I don't have a remote with me so I can't check it until I give it back. It'd just save me the hassle of maybe having to do it again if someone here could shed some light on this.

Thanks a lot!

 

Hi folks,
Trying to get my DM800 working with NTL cable in Dublin.
Am using an Enigma2 image & downloaded MGCAMD 1.30 off the web using the DM800 itself. Am trying the N2_Ireland_dream7x_8x_fix.zip as described by Sc0user ealier in this thread.

I rename mgcamd.mips (contained in N2_Ireland_dream7x_8x_fix.zip) to the exact name of your installed mgcamd file in usr/bin. FTPed the renamed file across to replace the MGCAMD 1.30d version.
I set the attributes to 755.
I FTPed softcam.key, autoroll.key and priority list files to usr/keys & rebooted & set the cam to MGCAM 1.30d. Still cannot watch anything except the basic FTA channels.

Noticed that if I start the MGCAMD 1.30d using the blue button I get a message saying it's started correctly & it does appear as the active
CAM. But if I start with TUXBOX, I see some messages, sumarised below ;

MGCAM is version 1.24 & compiled June 2007
It detects my box as a DBox 2 (It's a DM800)

/dev/dvb/adaptor0/CA1 error 16: device or resource busy
Conax.key error 2:no such file or directory
keys readed
Conax.key error 2:no such file or directory

Wondering if this is the right fix file for a DM800.
It seems to think its a DBox2 ?? And it's also looking for files that
are not there, but yet the MGCAM does appear to load, but still cannot view the scrambled channels.
I also tried to use the MGCAMD 1.30d version of the CAM with the
softcam.key, autoroll.key and priority list files from the fix but still no channels & get other error messages when starting with TUXBOX.

Am I right to be using the N2_Ireland_dream7x_8x_fix.zip fix ??
Do I need a specific image type for it to work ??

Any help would be appreciated

 

lads! my box is goin grand but 1 prob, yesterday and again today its starting to freeze and the only way i can fix it is to disconnect it, any ideas?? could it b over heating? i keep it plugged in overnite, or is it something diffrent? ive looked back a few pages and nobody has this prob

 

Hi Superreds,
What type of box is it ??

 

dm 500c

 

Hi Superreds,
Sometimes freezing can occur if there is a weak signal. Has the signal
been split or weakened in some way. As for overheating... does the box feel very warm ?? If the freezing problem goes by unplugging the box & immediately plugging it back in again, without it having too much of a chance to cool down, it unlikely to be an overheating problem.

 

yea good point wolfkid, no there hasnt been any changes to my signal it seems grand now for the past 90mins or so, ill let you know if it happens again

 

@Wolfkid7

mgcamd doesn't work on MIPS boxes- you needto use rgcamd

 

Hi mhill7895,
Could you provide me with some more details ?
What version of RQCAMD & where can I get it ?

Thanks !!

 

@Wolfkid7

Check your private messages, I sent you one yesterday afternoon...

 

Hi mhill7895
Thanks !!
Will have a look.

 

...

 

Hi mhill7895
Good news !!
I'm up & running. Thanks a million for your patience !!
First thing I'm gonna do is backup this working image LoL

Folks, if you have a DM800 & cable in Dublin, with U*C.
Follow mhill7895's steps above.
I also dropped the supplied files in scce into /var/scce. Had read in a previous thread that they were required also.

Thanks again for the help !!

 

The same thing stared to happen to my box last night! The box becomes non responsive after a certain amount of time and it freezes. also just before it freezes the sound was off my at least 5seconds. Tried reflashing it but no joy.

Anyone any ideas???

It also electricuted the shit outa me when i was trying to plug it out at the back of the box

 

I also had the same probem Westham with out the shock though! I leave mox box on so i will try and turn it off when not in use to see if its overheating as suggested above, seems starnge a few of us havig the same problems though!
Bernie

 

i have not been having this but i do turn off power every night to it. it sounds like your clearing the ram in a computer by turning power off and back on

 

It seems to working ok now. I just plugged it out all morning. It had been left on for a few days so maybe that was the problem

 

The sound is still off tho!! damn

Only seems to be the movie channels