dvd clone & any dvd

no that is clonedvd and any dvd
that is the report i was reading

 

chicoz66,

Well is seems that you're running a system close to mine

I can only surmise that a possibility for your crash is a conflict in software. I run AnyDVD and a ton of other programs including CloneDVD2 (by elby) and have no issues. I used to use Clone DVD2 (Now Clone DVD3) but had issues with the quality as well as backing up several programs but never crashing.

I am running XP with SP2 and all runs well.

To ensure that it is in fact the software, I'd like you to try to backup a DVD using DVD Shrink and DVD Decrypter. -

The step-by-step guide is in my sig

Including the download and installation of the programs it should take you about 1 1/2 hours top from start to finish. Allow AnyDVD to operate BUT uninstall Clone DVD. In the end we will be able to determine if it is your program PLUS, you'll have backed up another DVD - Good deal, Huh ?

As far as your uninstall of your program, - Use "Add /Remove" Programs in your Control Panel. Then clean out your registry to insure you have a clean PC. When we reinstall your program back in, you'll have a virgin install.

Here are 2 Registry Cleaning method

Go into your registry C:\Windows\Regedit.exe and do a search "Ctrl and F" for the program you're trying to eradicate.

Example: DVDCloner II, Nero, etc.

Another way to clean your registry is to use something like RegClean. A Free program that will get rid of a lot of unattached registry files

RegClean ~>
http://www.download.com/3000-2094-881470.html?tag=list

Cheers,

Pete

 

All of those tell me you are confusing CloneDVD with CloneDVD2 by Elby because they are all false statements

 

Note:

They surely don't apply to CloneDVD2 (by elby)

I've been running that proggy since it came out and those ststements do no apply -

It puts a DVD-9 onto a single dic quite fine (a bit of quality loss when compression is over 83 %) and requires a ripper i.e. DVD43 OR DVDD.

Me think it sounds like this:

the following is a ScubaPete "Bad Buy".

CloneDVD ver2 (by some other guys - http://www.clonedvd.net/download.html

Cheers

 

hi scuba !

i have DVD Shrink and DVD Decrypter. already
and i also down load any dvd also
so now i am using any dvd to break it and using
dvd shrink to burn the movie ... but now the movies that i burn they frezze and the beginning or at the end also they break like the picture is broken
i have burn to 3 movies so far but they are not working at all those movies are
1... shark of tales
2... friday
3... next friday
just to try and see how this to program work but they
are not doing good with me is there something i am doing wrong ?

please let me know since u have those program
thank you ... for all your help chicoz66


also how those DVD Decrypter works and how can i burn a movie with the program i know it send it to
the HD and then how u burn it ? if i can take out
from the HD with NERO ?? or any other programs ?
i try that one too with friday and as now friday
still in the HD i can not take out to burn it
also it make a bunch of file so how can you compress all those file to one ???
thank you

 

@chicoz66,
Do your self a favor and go to my website (link in signature) then use the ScubaPete guide there and you will be all set.

 

I think you should pay closer attention to the settings you used in DVD Shrink (set your "target size" to 4360 MB or even 4300 MB AND use decent media.

Writing to the edge of the disc is like shooting yourself in the foot ~

Compress your DVD to somewhere around 4.3GB instead of the recommended 4360MB. I.e., Go into DVD Shrink, "Edit", "Preferences" then set the "DVD Target Size" to "Custom" and enter 4300MB as the size. Reducing the amount of Data to be burned it keeps your burning away from the disc's edges where the dye on poor quality DVD discs tends to be uneven and may even be brittle and flaking. Nero, DVD2One and most good burning applications will allow you to set the, "DVD Target size".

You may reduce the number of errors and "artifacts" (the "freezing", " skipping", pixelations and other picture abnormalities) when burning poor media by burning at a reduced speed. It has been my experience that burning at 2.4X will succeed where faster burns will not.

The second part of the solution is to always use a decent grade media. I suggest something like those discs made by Taiyo Yuden, Ritek, Mitsubishi or RICOH. Unfortunately they are also the discs most plagued by pirate Mfgrs. and for that reason I like dealing with Mertline, Supermediastore OR Newegg who have a great return policy on their products. I have had great luck with Ritek, RiData and Verbatim DataLife Plus discs and their prices are extremely reasonable.[/b] As a passing note, when buying Verbatim's, they come with a lifetime warrantee. Return them with your sales slip OR register receipt and a new one will be shipped to replace it.

Cheers,

Pete

 

hi scuba ...
i find out what happen with my puter finally
my nero easy writer went crazy dot know y jet
but when i stared re -install everything back againg
the same error code come on all over againg , so i delete
hole thing againg and i up grade nero .. so i think so far
everything is working good .. now i am trying to learn how
to use dvd decorer and dvd ripper but i am having some problems
with it now .. i am sure i will figure out .. also shrink dvd
oh .. also i want to tell u and mayo thank you for all yall
help and both of yours site ROCK is very help so ..
thanks againg chico

 

scuba ..
also you send me a program name RegClean and i download it
and i try to open but it wont let me open it its under winzip
and me winzip tell there are 3 files and they got open succefuly
but nothing come on ?? so how do i find out if the program
is working or not ,,, ??? also i try to delete out the system
and it wont let me it tells me windows is using the program
and i can delete .. i just need to find out more abut it ?
and how does the program works ??
thanks chico

 

Chico,

Man, you have got to learn how to punctuate your sentences. You also have to learn how to use spell check so your posts can be read intelligently.

If your program says the 3 files are opened, go to the location where you downloaded the files and click on the .exe file to install it.

 

scuba..
it just tell me they are open but it wont not let me go
to any site to download anything ???
i try everything and still can not install it ??
now what can i do ??

thank you chico

 

chicoz66,

You have too much information missing.

1. When you download any program, there is a box that comes up to tell you where the file is being sent and giving you the chance to change it. It also contains the program's name. You must look at that box and write down where the file is being sent. Usually it is sent to Program Files.

When you speak of movies you cannot find on your HD, the same is true. You can't just click something without reading it. Also, what type of format are the movie files in ? We have to know that before we can tell you how to get them and burn them. When downloading either AnyDVD OR CloneDVD2 you must know where they go so that you can extract the files and click on the install file OR you must click on the .exe file, which should install the program for you.

Try to download the programs again. look where they are going, all the other programs will be there too. Delete the extra programs and install just one.

I hope that helps,

Pete

 

I got the same problem. eventualy it became "no boot drive detected" and i lost all my files on that harddrive. anydvd is terrible software and i dont recoment it to anyone. it is smarter to wait a month or so untill newer versions of dvd shrink come out that are able to copy these new dvds.

 

thank you diabolus3 (Newbie) for you r support
and yes any dvd clone dvd its does not work
that great .. so now you gone have to format your HD ...

 

@diabolus3,

You're in for a very long wait, I'm afraid........

 

Right bilbo65, Shrink won't be getting any updates that we know of.

@diabolus3. Anydvd is one of the best decrypters out there. Since it runs in the background I can't see what problem you are having with it. At times there are a few programs that conflict with it but not very many. You will also find out if you do some reading that many members are running Anydvd behind Shrink so it can still be used to decrypt and process the new movies and encryptions. Just thought your statement was way off base.

Jerry

 

I agree with you Jerry. I've even used the Beta versions on about eight movies with absolutely no problems. Never have. Of course I don't have a number of similar programs running at the same time competing for the same resources and I don't use Nero which does appear to have conflicts in a few cases.

 

I couldn't get the Beta 5.0 to work at first. I corrected the problems last night. It was a Nero conflict of sorts. Now I have Clonedvd 2.8 and Anydvd 5.0 both working right. Also reinstalled Nero and its working too without the conflict.

Jerry

 

ok there, i am a NEWBIE at this forum but dont act like some sort of bigshot. highlighting it out. anydvd does not take a rocket scientist to figure out. and yes my problem seems like i did it my self and am blaming on some innocent piece of software. but im not the only one who has had this problem. I did not format the drive because it was replaced due to dell warrenty. but i did try to run it as a slave and may computer wasnt able to pick it up, these are sata drives so it really doesnt take a rocket scientist for this ether. I would imagin that what ever anydvd does to you dvd player in order to make it opperate differently it did to my hard drive. I dont have the thread saved in which someone had the same problem but i know it exists. thanks. what i wanted to know is if anydvd has any competitor companys that do the same thing. dvd43 i tryed and it sucks. thanks there MEMBER

 

by the way i have 1 gig ram and 256 video memory 3 gig pentium 4. pritty decent set up so dont worry about resources.