I want to burn a avi so i already converted to dvd using winavi converter. Now i have nero 6 so when i try to burn it works but then at the end it says burn sucessful but when i open the dvd-rw cd it is empty. Whats wrong.
here is the log. Windows XP 5.1 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.0 Recorder: <NU DVDRW DDW-082> Version: B373 - HA 0 TA 1 - 6.6.0.0 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === NU DVDRW DDW-082 E: CDRom1 Generic DVD-ROM F: CDRom2 ATAPI DVD-ROM 16XMax D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 676MB (692740kB) Memory in use : 33 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.10.2004 UDF/ISO compilation 8:52:49 PM #1 Phase 112 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation started 8:52:49 PM #2 Phase 114 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation completed (no file modified) 8:52:49 PM #3 Text 0 File Isodoc.cpp, Line 6170 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:52:49 PM #4 Phase 111 File dlgbrnst.cpp, Line 1861 DVD-Video files sorted 8:52:49 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:52:50 PM #6 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-082 running 8:52:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:52:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:52:50 PM #9 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-at-once, using DVD media 8:52:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1113743 (247:29.68, 2175MB) 8:52:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 8:52:50 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: NU DVDRW DDW-082, Media type: DVD-RW Disc Manufacturer: RITEKW - 01 Disc Application Code: 64, Disc Physical Code: 214 8:52:50 PM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:52:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1113744 (1113744) = #1113744/247:29.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1113744 blocks [NU DVDRW DDW-082] -------------------------------------------------------------- 8:52:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2280947712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1113744 | lead-out | 1 | 0x00 | 0x41 8:52:50 PM #16 Phase 24 File dlgbrnst.cpp, Line 1861 Caching of files started 8:52:50 PM #17 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 8:52:50 PM #18 Phase 25 File dlgbrnst.cpp, Line 1861 Caching of files completed 8:52:50 PM #19 Phase 36 File dlgbrnst.cpp, Line 1861 Burn process started at 2x (2,770 KB/s) 8:52:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:52:50 PM #21 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 14:09,072 (849072ms) -> OK 8:52:50 PM #22 Text 0 File DVDR.cpp, Line 1955 Recording mode: Sequential Recording Mode 8:52:50 PM #23 Text 0 File Mmc.cpp, Line 20542 Set BUFE: Seamless Link -> ON 8:52:50 PM #24 Text 0 File DVDR.cpp, Line 2096 Start write address at LBA 0 DVD high compatibility mode: Yes 8:52:50 PM #25 Text 0 File Cdrdrv.cpp, Line 8259 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:53:09 PM #26 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-ROM, write to EEPROM Changing the book type was finished with error code: 0 9:07:00 PM #27 Text 0 File WriterStatus.cpp, Line 116 <NU DVDRW DDW-082 > start writing Lead-Out at LBA 1113744 (10FE90h), lenght 0 blocks 9:07:00 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:07:00 PM #29 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was 1113743 9:07:23 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1175 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 9:07:24 PM #31 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-RW, write to EEPROM Changing the book type was finished with error code: 0 9:07:24 PM #32 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 9:07:24 PM #33 CDR -1135 File ThreadedTransferInterface.cpp, Line 1774 Write error 9:07:24 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1774 Could not perform end of Disc-at-once 9:07:24 PM #35 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was -1 9:07:24 PM #36 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-RW, write to EEPROM Changing the book type was finished with error code: 0 9:07:24 PM #37 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 9:07:24 PM #38 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 9:07:24 PM #39 Phase 38 File dlgbrnst.cpp, Line 1861 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
_____________________________________________________ CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off ______________________________________________________ Might help if you enable DMA mode - go to your device manager to do this.
Hmm - Nero obvisouly thinks otherwise. Might be worthwhile uninstalling your drives and reboot Windows to reinstall.
Some further how to - courtesy of Nephilim Go to Device Manager > Expand the tree for DVD/CD ROM Drives > Find the drive in question, right click it and go to Properties > Under the Driver tab, select Uninstall then OK. Now reboot and Windows should detect and reinstall the drive. If this doesn't help try the same steps as above except expand the tree for IDE ATA/ATA Controllers and uninstall either the Primary or Secondary controller depending on which one the drive in question is attatched to. Nero Info Tool can tell you which chain the drive is on under the Configuration tab. http://www.afterdawn.com/software/cdr_software/cdr_tools/nero_info_tool.cfm
When i burn on my cd-rw it works fine but when i try to burn on a dvd-rw then it doesnt work. And i dont think its the discs because they are both made from memorex
i did uninstall the dvd rw drive and still didnt work. So then i uninstalled the ide ata/atapi contoller still no luck. I have no idea what to do. Please help me
So after experiencing 3-to-4-hour start-to-finish copying times, I was ecstatic when I backed up a movie in one hour. THEN, I slipped in another for backup and the entire process - encoding and burning - took 20 minutes. Huh?! Pete and BigO, Decrypter gives me information on my media - "Destination Media Type: DVD-R (Disc ID: RITEK G04)". I know that you guys stress the importance of good media, and mine is TDK, so I was wondering if the information that Decrypter gave means that I have the "good" TDK or not, or if the information doesn't mean much. Ok, here is the error message that I always get after the encoding process and when Decrypter is burning the file(s). I just click Cancel and proceed to a good finish . . . "I/O Error! Device: [1:0:0] SONY DVD-RW DRU-710A BY01 (D (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10) - Sectors: 0 - 31 Sense Area: 70 00 03 00 00 00 00 73 03 00 00 00 00 Interpretation: Power Calibration Error" Any ideas?