1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dvd Rebuilder Log

Discussion in 'DVD / BD-Rebuilder forum' started by killalot, May 17, 2009.

  1. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    Thought I'd give this DVD rebuilder that i've heard so much about a try,does the log below look correct,ok! any advice on what i may need to do.Is there an updated guide because the 1 on here is some years old and refers to older versions,cheers for any advice.

    [15:25:05] One Click encoding activated...
    -----------------
    [15:25:05] Phase I, PREPARATION started.
    - VTS_01: 2,811,985 sectors.
    -- Scanning and writing .D2V file
    -- Processed 185,179 frames.
    -- Building .AVS and .ECL files
    - Reduction Level for DVD-5: 74.3%
    - Overall Bitrate : 3,685Kbs
    - Space for Video : 3,332,136KB
    - HIGH/LOW/AVERAGE Cell Bitrates: 4,858/600/3,685 Kbs
    [15:29:07] Phase I, PREPARATION completed in 4 minutes.
    [15:29:07] Phase II ENCODING started
    - Creating M2V for VTS_01 segment 0
    - Creating M2V for VTS_01 segment 1
    - Creating M2V for VTS_01 segment 2
    - Creating M2V for VTS_01 segment 3
    - Creating M2V for VTS_01 segment 4
    - Creating M2V for VTS_01 segment 5
    - Creating M2V for VTS_01 segment 6
    - Creating M2V for VTS_01 segment 7
    - Creating M2V for VTS_01 segment 8
    - Creating M2V for VTS_01 segment 9
    - Creating M2V for VTS_01 segment 10
    - Creating M2V for VTS_01 segment 11
    - Creating M2V for VTS_01 segment 12
    - Creating M2V for VTS_01 segment 13
    - Creating M2V for VTS_01 segment 14
    - Creating M2V for VTS_01 segment 15
    - Creating M2V for VTS_01 segment 16
    - Creating M2V for VTS_01 segment 17
    - Creating M2V for VTS_01 segment 18
    - Creating M2V for VTS_01 segment 19
    - Creating M2V for VTS_01 segment 20
    - Creating M2V for VTS_01 segment 21
    - Creating M2V for VTS_01 segment 22
    - Creating M2V for VTS_01 segment 23
    - Creating M2V for VTS_01 segment 24
    - Creating M2V for VTS_01 segment 25
    - Creating M2V for VTS_01 segment 26
    - Creating M2V for VTS_01 segment 27
    - Versions:
    -- CCE Basic Version: UNKNOWN
    -- CCE SP Version: 2.70.2.12
    -- ReJig Version: 0.5.0.5
    -- QuEnc Version: 0.7.1.0
    -- HC Encoder Version: 0.19.0.1
    -- DECODER Version: UNKNOWN
    -- AVISYNTH Version: 2.5.8.0

    - Creating M2V for VTS_01 segment 28
    - Creating M2V for VTS_01 segment 29
    - Creating M2V for VTS_01 segment 30
    - Creating M2V for VTS_01 segment 31
    - Creating M2V for VTS_01 segment 32
    - Creating M2V for VTS_01 segment 33
    - Creating M2V for VTS_01 segment 34
    - Creating M2V for VTS_01 segment 35
    - Creating M2V for VTS_01 segment 36
    - Creating M2V for VTS_01 segment 37
    [16:27:25] Phase II ENCODING completed in 58 minutes.
    [16:27:25] Phase III, REBUILD started.
    - Copying IFO, BUP, and unaltered files...
    - Processing VTS_01
    - Reading/processing TMAP table...
    - Rebuilding segment 0 VOBID: 1 CELLID: 1
    - Rebuilding segment 1 VOBID: 1 CELLID: 2
    - Rebuilding segment 2 VOBID: 1 CELLID: 3
    - Rebuilding segment 3 VOBID: 1 CELLID: 4
    - Rebuilding segment 4 VOBID: 1 CELLID: 5
    - Rebuilding segment 5 VOBID: 1 CELLID: 6
    - Rebuilding segment 6 VOBID: 1 CELLID: 7
    - Rebuilding segment 7 VOBID: 1 CELLID: 8
    - Rebuilding segment 8 VOBID: 1 CELLID: 9
    - Rebuilding segment 9 VOBID: 1 CELLID: 10
    - Rebuilding segment 10 VOBID: 1 CELLID: 11
    - Rebuilding segment 11 VOBID: 1 CELLID: 12
    - Rebuilding segment 12 VOBID: 1 CELLID: 13
    - Rebuilding segment 13 VOBID: 1 CELLID: 14
    - Rebuilding segment 14 VOBID: 1 CELLID: 15
    - Rebuilding segment 15 VOBID: 1 CELLID: 16
    - Rebuilding segment 16 VOBID: 1 CELLID: 17
    - Rebuilding segment 17 VOBID: 1 CELLID: 18
    - Rebuilding segment 18 VOBID: 1 CELLID: 19
    - Rebuilding segment 19 VOBID: 1 CELLID: 20
    - Rebuilding segment 20 VOBID: 1 CELLID: 21
    - Updating NAVPACKS for VOBID_01
    - Rebuilding segment 21 VOBID: 2 CELLID: 1
    - Rebuilding segment 22 VOBID: 2 CELLID: 2
    - Rebuilding segment 23 VOBID: 2 CELLID: 3
    - Rebuilding segment 24 VOBID: 2 CELLID: 4
    - Rebuilding segment 25 VOBID: 2 CELLID: 5
    - Rebuilding segment 26 VOBID: 2 CELLID: 6
    - Rebuilding segment 27 VOBID: 2 CELLID: 7
    - Rebuilding segment 28 VOBID: 2 CELLID: 8
    - Updating NAVPACKS for VOBID_02
    - Rebuilding segment 29 VOBID: 3 CELLID: 1
    - Rebuilding segment 30 VOBID: 3 CELLID: 2
    - Rebuilding segment 31 VOBID: 3 CELLID: 3
    - Rebuilding segment 32 VOBID: 3 CELLID: 4
    - Rebuilding segment 33 VOBID: 3 CELLID: 5
    - Rebuilding segment 34 VOBID: 3 CELLID: 6
    - Rebuilding segment 35 VOBID: 3 CELLID: 7
    - Rebuilding segment 36 VOBID: 3 CELLID: 8
    - Rebuilding segment 37 VOBID: 3 CELLID: 9
    - Updating NAVPACKS for VOBID_03
    - Updated VTS_C_ADT.
    - Updated VTS_VOBU_ADMAP.
    - Updated IFO: VTS_01_0.IFO
    - Updating TMAP table...
    Correcting VTS Sectors...
    [16:35:25] Phase III, REBUILD completed in 8 minutes.

    Done.
    [16:35:25] PREPARE/ENCODE/REBUILD completed in 70 min.
     
  2. dialysis1

    dialysis1 Regular member

    Joined:
    Mar 13, 2006
    Messages:
    4,367
    Likes Received:
    0
    Trophy Points:
    46
    I see your using the free version.
    The log doesn't tell what encoder you're using.
    If you're using HCenc, you should update it.
     
  3. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    I'm using this encoder.

    CCE SP Version: 2.70.2.12
     
  4. dialysis1

    dialysis1 Regular member

    Joined:
    Mar 13, 2006
    Messages:
    4,367
    Likes Received:
    0
    Trophy Points:
    46
    Well then you should have no problems.
     
  5. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    OK cheers,what would you say is the lowest reduction lever you should go to before the quality suffers?

    Reduction Level for DVD-5: 74.3%
     
  6. dialysis1

    dialysis1 Regular member

    Joined:
    Mar 13, 2006
    Messages:
    4,367
    Likes Received:
    0
    Trophy Points:
    46
    It all depends on the movie.
     
  7. brak

    brak Member

    Joined:
    May 12, 2009
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hey guys ... afraid I'm also a newbie and a 'green' one at that. Been following this topic 2nite (my time @ present 01:35, LONG past my bedtime)
    I've just finished downloading DVD Rebuilder (The current free version)
    ... Before I carry on ... everything I do on my laptop has been self taught ... so run now ... while you can...
    O.K ... so be kind and gentle please.
    1) Was the prog supposed to download as a Zip File ?
    2) If 'Yes' ... sheez, what do I do after that ... I'm Non-Blonde, but ... SOS. Pleeeease !
     
  8. dialysis1

    dialysis1 Regular member

    Joined:
    Mar 13, 2006
    Messages:
    4,367
    Likes Received:
    0
    Trophy Points:
    46
    Yes it's a ZIP file.
    Open the file and extract the files.
    Then double click on DVDRebuilder_v0.98.2_Free.exe to install.
     

Share This Page