1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dvd ripping

Discussion in 'DVDR' started by ladyred07, Feb 12, 2007.

  1. ladyred07

    ladyred07 Guest

    Hi everyone can you please tell me what "ripping" means? I really must sound ignorant huh?

    thanks
     
  2. aabbccdd

    aabbccdd Guest

    ripping is removing the protection from a store bought dvd

    rippers

    anydvd
    dvd fab decrypter
    dvd decrypter
    etc.
     
    Last edited by a moderator: Feb 12, 2007
  3. ladyred07

    ladyred07 Guest

    thanks for your reply, but does dvd encrypter work the same as
    anydvd? I use anydvd and then use clonedvd with it but can i use dvd encrypter in the same way as it seems more complicated and takes forever?



     
  4. aabbccdd

    aabbccdd Guest

    anydvd removes the protection and clonedvd 2 is the transcoder plus burns thats your best choice/combo out there being the program updates to do the newer movies plus its very easy to use for nOObs. it should take you about 20 to 35 mins. to backup your movie with this proccess. how long is it taking?

    http://webpages.charter.net/bacitup/

    heres a guide to follow to using the program

     
  5. ladyred07

    ladyred07 Guest

    thanks again, yes it only takes me 20 to 30 mins when i use anydvd but it was dvd encrypter which i mentioned is more hectic as it can take up to over an hour sometimes. With dvd encrypter when i insert
    the dvd it goes through a long process whereas with anydvd it is like instant recording whats on the disk ect.

    What i want to know, if you can help me, is if i use dvd encrypter what do i have to do next do i have to save it then i can make the cd or dvd can you please give me the process of how it is done.
    Thank you so much.
     
  6. aabbccdd

    aabbccdd Guest

    ladyred07,oh ok your talking about dvd decrypter right?

    yes to use it you go ISO read then ISO write. but remember it will not do alot of the newer movies by its self. if you want to rip the movie to the HD with the program its good for that. use this guide for the program that will help you out

    http://webpages.charter.net/bacitup/

    heres a good one too

    http://www.mrbass.org/dvdrip/

    and if your going to use anydvd with dvd decrypter do this....

    To use DVD Decrypter in conjunction with AnyDVD as stated per Olli ->OF SLYSOFT AND CLONEDVD

    Proceed to the DVD Decrypter Opening Page - Tools - Settings

    I/O Tab - Click on "Elby CDIO-Elaborate Bytes"

    General Tab - un-check "Check For Structure Protection"
     
    Last edited by a moderator: Feb 13, 2007
  7. ladyred07

    ladyred07 Guest

    you are a legend (and that i dont mean by age lol) but you have given me so much information and i will have a look at everything
    you have given me...... but but but if i still have a problem can i get back to you again?

    thanks so much
     
  8. aabbccdd

    aabbccdd Guest

    sure huh ,shoot me back with any other questions you may have, good luck
     
    Last edited by a moderator: Feb 13, 2007
  9. ladyred07

    ladyred07 Guest

    hi again,

    I clicked on ISO read and ISOwrite and i saved it to my hardrive. It states that it was successful. When it is ready to burn and i put a dvd in, i get a message that the file is too big. Also do i use the DVD or CD and does this mean i have to get a dvd with more capacity?
     
  10. aabbccdd

    aabbccdd Guest

    yes you will need a DVD , some dvds won't need to be transcoded after you use dvd decrypter. it depends on the size of the file you have. if its to big to fit on a "single layer" blank so you will have to run the flie though dvd shrink first to shrink the file down so it will fit on a "single layer" dvd(DVD-5) which is (4.7 gig) or use a "daul layer"(DVD-9) which is(8.5 gig) so use that guide i posted and run the file though dvd shrink then burn with nero or dvd decrpter. remember to burn no faster than 8x with good media Taiyo Yuden and or Verbatim would be best

    this is the guide you want

    Backup with DVDDecrypter & DVD Shrink

    from this link

    http://webpages.charter.net/bacitup/
     
    Last edited by a moderator: Feb 13, 2007
  11. ladyred07

    ladyred07 Guest

    hi again,

    I used DVD Shrink and it did everything for me i couldnt believe it so i can use the cd's that i had and didnt have to buy more with a bigger capacity. (not very good with computer words but you know what i mean), it even burnt the cd for me so i didnt need any other program. I am starting to read about
    all of this as you gave me so many things to look at so i can learn, for which i thank you, but there is so much to involved but i will get there. The copy i made was so clear.

    thanks heaps
     
  12. aabbccdd

    aabbccdd Guest

    great remember you can use dvd shrink alone without dvd decrypter as long as its not a newer release with heavy protection. that would be i less step. good luck
     
  13. ladyred07

    ladyred07 Guest

    oh, so its possible i just fluked this movie and could have probs with others. I never knew that there could be a lighter or heavier protection. So if that happens do i use dvd encrypter first and are there any settings on that to be done before i use it? and then what do i use after that can you give me in short what the full process would be when using dvd encrypter.

    thanks again
     
  14. aabbccdd

    aabbccdd Guest

    ladyred07 ok lets start from the beginning . to do the newer movies you have several options

    1. ok dvd shrink and or dvd decryter will have problems doing the newer movies by there selfs you can run anydvd behind dvd shrink but you will still have problems transcoding some of the newer movies.

    2. you can use a program called "RipIt4Me" which combines dvd shrink, dvd decrypter, FixVTS and then you burn with nero or dvd decrypter, its freeware and does a great job heres the info and guides for it

    http://www.ripit4me.org/

    http://www.ripit4me.org/guide.html

    http://forums.afterdawn.com/thread_view.cfm/360110

    3.IMO this is your best option since you already have anydvd use clonedvd 2 with it. both programs update for life ,its very easy program to use for nOOBs like you who have limited ability backing up DVDs (i don't mean this in a bad way ok lol) you can control the burn speed (8x max is what you want to burn at) and the quality is good. theres a free 21 day trial also so you can download clonedvd 2 here


    http://www.slysoft.com/en/

    and guides to use the programs

    http://club.cdfreaks.com/showthread.php?s=&threadid=72022

    http://webpages.charter.net/bacitup/ (this one i posted several times)

    read this over try a few things out and let me know how you come out.


     
  15. ladyred07

    ladyred07 Guest

    thanks for all the information again i will have a look at it all
    late tonight. This is just so interesting. And yes i was using Anydvd with Clone DVD which was so simple (perfect for us newbies)but although i own Clone DVD i only had the
    trial for anydvd and when i tried to buy it on line it asked so many
    questions about my address and many personal things, whereas i thought it would only ask for a credit card and the usual and since i am in Australia and Slysoft is overseas i was a bit dubious. Thats why i started looking for an alternative program and lucky to have you help me.

    regards,

     
  16. aabbccdd

    aabbccdd Guest

    ladyred07 , its safe to buy anydvd , theres plenty of members that have anydvd here that are from Australia.

    BTW i am a huge AC/DC (Bon Scott) fan lol
     
  17. ladyred07

    ladyred07 Guest

    im back didnt get back to you sooner as i am and still is trying dvd decrypter, ripit4me dvd shrink and havent had much time as i have been working back. Once i finish i will report back to you if thats ok.

    Even though AC DC have sold over 150 million albums world wide ( as you can see i read a lot) i never listen to their music, but i hear they are really great.

     
  18. aabbccdd

    aabbccdd Guest

    "RitIt4Me" is also a great program hope it works out, let us know
     
  19. ladyred07

    ladyred07 Guest

    hi again,

    would you please be able to tell me the difference between Anydvd and Anydvd HD. Please make it in simple words as i am not really
    computer literate much.

    regards,
    marina
     
  20. aabbccdd

    aabbccdd Guest

    anydvd is for the regular DVD format

    anydvd HD is for the new High Def. format DVD-HD
     

Share This Page