end of kryptview?

Had the same problem, I turned of the homeplug for 30 seconds,turned it on and it worked again. Goodluck

 

Weird im in Oldham too.

Done all the usual shit.

Bounced the router, bridge, bounced the box, factory reset, rescanned etc

Think im going to have to sniff and see if the packets are getting to the box.

Although tested the wireless bridge on the pc and could get to the net.

Cheers

Kev

 

kev2k....do a factory reset on your box m8, and scan from the main cable feed, without your LAN connected....best of luk

 

I hope their servers are not where they can be easily busted like last time.

 

i dont think it was the servers that got busted, it was the local cards & card readers...i could be wrong

 

Uranus.

 

mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.

 

don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works

 

mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.

 

I tried this out, just like a big kid who is told not to do something by his parents.....and it turns out woodee is spot on.pressing the audio button and then powering off does indeed take you to the installation page when you power back on. (I wonder how many more of you out there will try this out now just to see...lol.)

 

maybe we should run a sweepstake my moneys on 47 your guess!!!!!

 

hi guys box gone '0000' again do i have to rescan or is their any other option and do i have to do a factory default , i ll have to sort favs again again again again....

 

when you do a new scan and after you have all your channels on your box go into the system settings and turn off the power search mode and you wont have that problem .

 

i have done that e45 from your last advice does not make any difference

 

There is no other way your box can lose channels unless you have either factory defaulted it or not turned the power search off as that is the only way your box will lose channels

 

Hi.guys just woundering if RUK is comeing back on with the kv boxes cheers

 

Gents
My A750 icconector keeps droping the internet connection. All lights will go off except the power light. Is this a problem with my internet or is it a possible fault with the icconector. When this happens the box stops working for a few seconds then cmes back. Reaaly anoying me now.

 

sounds like your internet connection is being dropped and coming back on, are the lights on the router going red or blinking???

 

I have an A780 in the seating room connected to a router and it is working ok. The A750 is in a bedroom connected via a powergrid 9020 homeplug. I know the inmternet connection is being dropped. Just trying to figure out if it the icconector or my set up that is the issue.

 

I would say its your set up and not the iconnect, check your homeplugs