used ripit,fixvts,decryter,shrink. this was at the tail end of error message. what does it mean? be simple since i am a newbie. thanks. 2:27:11 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x024B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 2:27:11 PM #28 CDR -1114 File Writer.cpp, Line 311 Reset occurred LITE-ON DVDRW SHW-160P6S\H1 T1 2:27:11 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:27:11 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:27:11 PM #31 Text 0 File DVDR.cpp, Line 2903 EndDAO: Last written address was 31 2:27:11 PM #32 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s)
Burn @ 4-8x and make sure your firmware is up-to-date. Here is the latest firmware for your drive (that I could find a working link to anyway).. http://www.liteonit.com/DOWNLOADS/ODD/SHW-160P6S/firmware/DR16PS0B.rar Download, extract and run that. Before running, make sure you have nothing else running and no disc in the drive. POst the rest of your error log here for us to look at plz.
this is the entire message. i have since gotten the same message on another dvd. what i don't understand is why do i sometimes have this problem and at other times i don't....i updated the firmware as of three weeks ago. don't know how to change the speed but while waiting for your reply will figure it out. again, thanks. 1A20-0218-0370-2363-8674-1140* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero API version: 6.6.0.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 17c Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 1 - 6.6.0.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163D atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163D D: CDRom0 LITE-ON DVDRW SHW-160P6S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 164MB (168276kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.6.2007 NeroAPI 3:56:52 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 3:56:52 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 3:56:52 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 3:56:52 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 3:56:52 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 3:56:52 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-160P6S running 3:56:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:56:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:56:52 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 3:56:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1853167 (411:48.67, 3619MB) 3:56:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 3:56:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 3:56:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:56:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1853168 (1853168) = #1853168/411:48.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1853168 blocks [LITE-ON DVDRW SHW-160P6S] -------------------------------------------------------------- 3:56:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3795288064, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1853168 | lead-out | 1 | 0x41 | 0x00 3:56:53 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 3:56:53 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 3:56:53 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 3:56:53 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 3:56:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:56:53 PM #21 Text 0 File DVDR.cpp, Line 2505 Recording mode: Sequential Recording Mode 3:56:53 PM #22 Text 0 File Mmc.cpp, Line 21732 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 3:56:53 PM #23 Text 0 File DVDR.cpp, Line 2660 Start write address at LBA 0 DVD high compatibility mode: Yes 3:56:53 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:57:42 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 15:57:42.906 - LITE-ON DVDRW SHW-160P6S\H1 T1 : Queue again later 3:57:58 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09F70600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 3:57:58 PM #27 Text 0 File Cdrdrv.cpp, Line 1288 15:57:58.593 - LITE-ON DVDRW SHW-160P6S\H1 T1 : Queue again later 3:58:03 PM #28 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 3:58:03 PM #29 CDR -1114 File Writer.cpp, Line 311 Reset occurred LITE-ON DVDRW SHW-160P6S\H1 T1 3:58:03 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:58:03 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:58:03 PM #32 Text 0 File DVDR.cpp, Line 2903 EndDAO: Last written address was 31 3:58:03 PM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 3:58:03 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 3:58:03 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=5.10 (103), size=22713 bytes, created 11/2/2002 1:56:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 4:12:48 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
A few things.. The media (discs) you are using isn't very good. Buy some better ones such as Verbatim or Taiyo Yuden and you should be good to go. You have Roxio software installed which can, and does, conflict with Nero - it is advised that you get rid of it. Download and run this tool to do that.. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Now, if you do that and slow your burn speed to 8x then you should be good to go. However, if you STILL encounter problems, then I'll osrt you out with steps to update your version of Nero as you're running quite a old version there.
thanks for the info about roxio. will take care of that problem. hate to be a pain but how do i change the speed? im at a loss there.
Well, it's slightly dependant on what Nero App you are using, but at some point during the pre-burning/transcoding stages, there should be a tab, or menu that lets you select that burn speed. What Nero App are you using? Nero Recode, Vision Express, Burning ROM?
now i am lost. i rip and burn with this process....ripit4me-fixvts-decrypter-shrink. i know that nero is in the background but i never see it during the encoding or burn. is this a problem?
the box you just showed...i never see it. when i open with shrink i click on backup.click ok and wait for it to do it's thing. what am i missing? as i said, iam a newbie...however once shown i never do forget.
What exactly are you backing up? Which version of shrink do you have; 3.2? Also, is the box in Edit > Preferences > File I/O > "Enable Burning With Nero" ticked?
forget my stupidity. i put a dvd in so that i could get to the backup part. there are 3 backup speeds..maximum 1.0x 2.0x and 2.4x is this what needs to be changed and will i have to change it each time i burn?
Ok, well, that's not giving you a full list of burn speeds, so, what you can do, is on the first screen when you click backup, select.. "Create DVD Files: Hard Disk Folder" Then, we can come to burn those files with Nero Burning ROM (and hopefully more burn speed options) in a minute.
thanks for all the info. will try what you have suggested and let you know what is what. again, thanks. don't know what i wuld do without your help.
good news and bad news....i tried the two dvds that wouldn't rip..one ripped the other didn't. same message as before. any suggests? is it the media (tdk) or something else?
