I have had my dvd player since xmas 2004, and have yet to enjoy it since i get a lot of errors. Wondering if anyone can help me as you all seem to be very helpful! DVD Burner Model: BENQ DW 1610, 16 x R16X-R DVD +/- RW/R CR-RW / DVD-ROM / CD-ROM Disk Type: Memorex DVD-R / 4.7 GB / 4X Software Used: Nero 6 Ultra Edition Everytime I burn a DVD (with just simple date files) i get an error message. Here is the log file: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <BENQ DVD DUAL DW1610> Version: B8B9 - HA 1 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <BENQ DVD DUAL DW1610 >Version: B8B9 - HA 1 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 1 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523804kB) Free physical memory: 132MB (135236kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.7.2005 ISO compilation 1:16:36 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:16:36 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 1:16:36 AM #3 Text 0 File Writer.cpp, Line 127 Writer BENQ DVD DUAL DW1610 running 1:16:36 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 1:16:36 AM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 1:16:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2297887 (510:38.37) Last address to be written: 1842287 (409:23.62) 1:16:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 1:16:36 AM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: BENQ DVD DUAL DW1610, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 1:16:36 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1842288 (1842288) = #1842288/409:23.63 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1842288 blocks [BENQ DVD DUAL DW1610 ] -------------------------------------------------------------- 1:16:36 AM #10 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to BENQ DVD DUAL DW1610 on a DVD-R media 1:16:43 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder BENQ DVD DUAL DW1610 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -521654272 1:16:43 AM #12 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 1:16:43 AM #13 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 1:16:43 AM #14 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 4x (5,520 KB/s) 1:16:43 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 1:16:43 AM #16 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 11:30,048 (690048ms) -> OK 1:16:43 AM #17 Text 0 File DVDR.cpp, Line 1407 Recording mode: Sequential Recording Mode 1:16:43 AM #18 Text 0 File Mmc.cpp, Line 18119 Set BUFE: supported -> ON 1:16:43 AM #19 Text 0 File DVDR.cpp, Line 1522 Start write address at LBA 0 DVD high compatibility mode: Yes 1:16:43 AM #20 Text 0 File Cdrdrv.cpp, Line 7827 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:19:50 AM #21 SCSI -1135 File Cdrdrv.cpp, Line 1361 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04120000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0x97 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 1:19:50 AM #22 CDR -1135 File Writer.cpp, Line 335 Write error 1:19:50 AM #23 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 1:19:50 AM #24 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 1:19:50 AM #25 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 1:19:50 AM #26 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 1:19:50 AM #27 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Can someone tell me what is wrong? I have already thrown 25 dvd in the garbage. Any help is greatly appreciated. Thank You.
hi autotechre welcome to Afterdawn, Lets go over some of the things from your log: your firmware is a bit behind...update using the link below http://forum.rpc1.org/dl_result.php?kaj=1&isces burner doesn't like your choice of media try some verbatims datalifeplus or some taiyo yuden. very bad..rather they are not known for using reputable manufacturers and for the most part the disks are crap. your version of nero is out of date. Use nero cleantool from http://nero.com/us/Clean_Tools.html to uninstall your version, reboot and update to the latest nero or 6.6.0.14. any disk with cmc coding is bad for your burner. See the second link in my signature for blank media codes and recommended brands. Also I suggest you stay away from store brand media (i.e. compusa) Please correct some of the issues I have pointed out and report back.
thank you very much for looking into it...i will try some of these alternatives later this evening...i just have a question...what exactly is firmware?
firmware is what 'teaches' your burner about media types/speeds etc. So if your firmware is out of date, it won't be able to recognise newer media correctly/if at all.
Firmware is the software that is embedded within that particular piece of hardware. On motherboards it is called the BIOS.
@autechre - in addition to matt72's reply - *peeks over matt72's shoulders* - Nero doesn't recognise the burner correctly. This should be resolved by installing latest Nero as per matt72 - this isn't too bad, but for future burns make sure to close down more applications to free up more memory - did you intend to use multisession ? - when you install latest Nero make sure to NOT install Nero's InCD - it interferes with standard Nero Burning Rom
lol didn't have a chance to go thru the log vigorously as work is blocking and checking websites that are categorized as peer2peer so I have to backdoor the actual forums link. Those drivers look like coraldraw or some other application not in use but runs as a hidden process. As long as we get him burning that is the main goal. *grumble grumble @ creaky stealing my entrance phrase
no worries, just couldn't resist the shoulders thing i'm able to clobber quite a few posts as i'm working away all week so i'm able to spend a bit longer on each post. Oops thanks for pointing out the InCD thing - i should have said Roxio @autechre - ignore my InCD comment in previous reply. Uninstall Roxio software as that also interferes with Nero, as does InCD
@creaky, quick question..how do you put your pc specs in your signature? Need to do that while waiting for autechre to reply back if he started yet.
i am in the process of figuring things out.... 1. For the firmware, there are a few options to choose from: B8H9, B8J9...etc..which one should i choose? 2. I cleaned out NERO and installed the version you suggested, but it ended up being a demo version and I didnt have the option of burning a data disc, so i am downloading version 6.6.0.15 instead. 3. I went out and bought some SONY DVD +R 8X I am just waiting to install NERO, the download is taking a bit long; I will report back... Thanks for all the help guys!
So after taking steps 2 + 3 above, I got another error. The log file is pasted below. The burning process only went as far as 1%. Bear in mind i didnt upgrade the firmware yet. Whats the next step? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <BENQ DVD DUAL DW1610> Version: B8B9 - HA 1 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CRW-5232AS >Version: 1.0 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === ASUS CRW-5232AS D: CDRom0 BENQ DVD DUAL DW1610 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523804kB) Free physical memory: 135MB (138304kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.7.2005 ISO compilation 10:46:52 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:46:52 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:46:52 PM #3 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DUAL DW1610 running 10:46:52 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:46:52 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:46:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1842271 (409:23.46, 3598MB) 10:46:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:46:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: BENQ DVD DUAL DW1610, Media type: DVD+R 10:46:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:46:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1842272 (1842272) = #1842272/409:23.47 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1842272 blocks [BENQ DVD DUAL DW1610] -------------------------------------------------------------- 10:46:53 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [BENQ DVD DUAL DW1610] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3772973056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1842272 | lead-out | 1 | 0x41 | 0x00 10:46:53 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:46:53 PM #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 10:46:53 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:46:53 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:46:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:46:53 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x035A6600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:46:53 PM #18 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 10:47:33 PM #19 SCSI -1176 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x066E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 10:47:33 PM #20 CDR -1176 File Writer.cpp, Line 311 Session fixation error 10:47:33 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:47:34 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:47:34 PM #23 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 10:47:34 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:47:34 PM #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:47:34 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ok, i updated my firmware, changed the version of NERO, and changed my DVD, and its still not working. Actually now, it only goes up to 1% as opposed to before, it went up to 14%. Here again is the log file. Any suggestions? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <BENQ DVD DUAL DW1610> Version: B8T9 - HA 1 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CRW-5232AS >Version: 1.0 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === ASUS CRW-5232AS D: CDRom0 BENQ DVD DUAL DW1610 E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523804kB) Free physical memory: 144MB (148468kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.7.2005 ISO compilation 12:04:14 AM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:04:14 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 12:04:14 AM #3 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DUAL DW1610 running 12:04:14 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:04:14 AM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 12:04:14 AM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1842271 (409:23.46, 3598MB) 12:04:14 AM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 12:04:14 AM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: BENQ DVD DUAL DW1610, Media type: DVD+R 12:04:14 AM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:04:14 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1842272 (1842272) = #1842272/409:23.47 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1842272 blocks [BENQ DVD DUAL DW1610] -------------------------------------------------------------- 12:04:14 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [BENQ DVD DUAL DW1610] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3772973056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1842272 | lead-out | 1 | 0x41 | 0x00 12:04:14 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:04:14 AM #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 12:04:14 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:04:14 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 12:04:15 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:04:15 AM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x036A6600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 12:04:15 AM #18 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 12:04:58 AM #19 SCSI -1176 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0AD70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 12:04:58 AM #20 CDR -1176 File Writer.cpp, Line 311 Session fixation error 12:04:58 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:04:58 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:04:58 AM #23 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 12:04:58 AM #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:04:58 AM #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:04:58 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
try slowing down your burn speed to 4x even though your dvds have the capability to burn @ 8x that speed will sometimes cause skips, pixellations, green lines, etc. as stated in previous posts turn some of your background processes off. Disconnect from the internet BEFORE turning off your antivirus and firewall. you have a few options here. If you are not sure which one to choose always goto the burner manufacturer website as they usually have an explanation regarding which one you should choose. The second choice is go with the latest one as an example: B8J9 will have additional updates that B8H9 has plus some new firmware updates (reference posts in regards to firmware and what it does). until you update your firmware your burner will/ does not like the media.
Hello, I checked with the website of the manufacture of my dvd burner, and I downloaded and installed the right firmware. I aslo decreased the speed to 4X, and disabled the internet. I do not use the laptop and do not have any verbatime products enabled. Is there anything else that show up in the log below? I am sorry for driving you crazy!!... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <BENQ DVD DUAL DW1610> Version: B8T9 - HA 1 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CRW-5232AS >Version: 1.0 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === ASUS CRW-5232AS D: CDRom0 BENQ DVD DUAL DW1610 E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523804kB) Free physical memory: 116MB (119520kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.7.2005 ISO compilation 12:32:45 AM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:32:45 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 12:32:45 AM #3 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DUAL DW1610 running 12:32:45 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:32:45 AM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 12:32:46 AM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1842271 (409:23.46, 3598MB) 12:32:46 AM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 12:32:46 AM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: BENQ DVD DUAL DW1610, Media type: DVD+R 12:32:46 AM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:32:46 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1842272 (1842272) = #1842272/409:23.47 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1842272 blocks [BENQ DVD DUAL DW1610] -------------------------------------------------------------- 12:32:46 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [BENQ DVD DUAL DW1610] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3772973056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1842272 | lead-out | 1 | 0x41 | 0x00 12:32:46 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:32:46 AM #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 12:32:46 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:32:46 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:32:46 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:32:46 AM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x036A6600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 12:32:46 AM #18 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 12:33:15 AM #19 SCSI -1176 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0AD70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 12:33:15 AM #20 CDR -1176 File Writer.cpp, Line 311 Session fixation error 12:33:15 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:33:15 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:33:15 AM #23 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 12:33:15 AM #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:33:15 AM #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:33:15 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 1/2/2005 10:03:17 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
even though nero uses alot of memory your log is slowing an extremely high use. something is running in the background. you are not driving me crazy I'm trying to help you like others helped me. Veritas (not verbatime) is a backup / packet writing software (see below) above is showing you have veritas somewhere on your system active. Simply could be you used the installation cd that came with your burner or came with the actual system itself. In either event find it and delete it as the issue possibly lays therein. Are you using nero vision express because that is how you would burn a dvd for use in a standalone player. The nero vision express should be longer. I see nero vision but before you burn it needs to convert from lets say mpeg1/2 to vob files for it to be dvd compliant. seems big almost like an iso image. nero vision express would convert first then burn (which is why I say you are using nero express not nero vision express). Also if in fact you are trying to burn in data mode switch to video mode for playing in a home dvd player. *smacks myself on the forehead. Missed that until I was looking @ your first log and the intro message regarding your dvd player from xmas 2004. Use the guides section as you can reference that in regards to burning a dvd using nero vision express.
