Okay so we've ruled out media, drive (the external works in another pc) and dvd. So try the hard drive check (another maintenance thing). It will check for errors and repair them. In my computer right click on your hard drive - usually c. Click on the properties tab than tools tab. Under error checking click check now. Then select both options. Windows will ask for a restart once you do this will run and windows will open when done. may take awhile so run it over night. Let me try and find a guide. Another thing to check is your ide cables (ribbon) make sure all drives are have secure connections. In the mean time I'm going try and think of some other solutions or causes for this error. (trying 2 avoid system restore/reformat - I may be missing something) Edit to add: found a guide: http://www.updatexp.com/windows-xp-chkdsk.html The graphical one in the middle of the page.
So I did a chkdsk, and now opened up a Video_TS in Shrink which had previously not opened (cyclic redundancy error) and now it opened and got thru it ok until the burn failed during "writing lead-in" It got my hopes up
Dang!! We're making some progress I think. Getting a litle further. Post this last log and we can go from there.
Here's the log from attempting to burn after opening files in shrink. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <TEAC DV-W28EAT> Version: 7.3B - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 1419kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TEAC DV-W28EAT atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TEAC DV-W28EAT D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (456944kB) Free physical memory: 126MB (129956kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.6.2006 NeroAPI 6:35:39 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 6:35:40 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 6:35:40 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 6:35:40 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 6:35:40 AM #5 Text 0 File Writer.cpp, Line 122 Writer TEAC DV-W28EAT running 6:35:40 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:35:40 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:35:40 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:35:40 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:35:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285839 (507:57.64, 4464MB) 6:35:41 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 6:35:41 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TEAC DV-W28EAT, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 6:35:41 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:35:41 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2285840 (2285840) = #2285840/507:57.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285840 blocks [TEAC DV-W28EAT] -------------------------------------------------------------- 6:35:41 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TEAC DV-W28EAT] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681400320, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2285840 | lead-out | 1 | 0x41 | 0x00 6:35:43 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 6:35:43 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:35:43 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 6:35:43 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 6:35:44 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:35:44 AM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 6:35:44 AM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 6:37:48 AM #23 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 6:37:48 AM #24 Text 0 File Reader.cpp, Line 385 Exception value: -1 6:37:48 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:40:15 AM #26 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 6:40:15 AM #27 Phase 129 File APIProgress.cpp, Line 276 Generating DVD borders completed successfully 6:40:15 AM #28 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 6:40:15 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 6:40:15 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So here's an interesting new development. Today I decided to try if I can burn a data cd. So I popped in a blank CD-R and then went to my computer to explore the CD Drive and it said D:// Is not accesible - incorrect function. Uh-0h...
One step forware - one step backwards! Okay I can't really find much on this drive. Looks like a newer drive. Who made the laptop? Next try uninstalling the ide channel reboot and let windows do it's thing and reinstall. If that doesn't work uninstall the drive and same deal. Here's a guide for dma but will so you what to do: http://forums.afterdawn.com/thread_view.cfm/260038 Next if you have any other burning software (not including decrypter) unisntall it like Sonic or what came with your pc - uninstall it. Write down the serial #'s. Then run the ccleaner again. There are 2 other drivers in your log that may be causing a conflict. I see no more verbs back to the Imations!
I just happened to open iTunes and got this surprising message, it may or may not be useful in figuring out what is goin on here. "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I Just tried opening some files that I decrypted, and got a new message during analysing in shrink. Failed to read file "C:/Decrypted\VTS_02_1.VOB Invalid access to memory location."
Hi kregmo73 The new error message you received normally means Shrink can't handle the copy protection. So to overcome that have AnyDVD running in the background (free 21 day trial - http://slysoft.com) while your have the original in the drive. I'm guessing you already ripped this w/ decrypter? There are some that even ripped w/ decrypter will still give shrink a problem. There is a workaround but AnyDVD is much easier. Or free would be rip with DVD Fab Decrypter (still updated) 1st then process in Shrink. http://dvdidle.com/free.htm Now the iTunes - I've seen this a couple of times when unisntlaling/installing Nero. So uninstall iTunes then reinstall and you should be good. One option I would not pick is 'launch when Windows starts' (or somthing to that effect). This option has the program running on start up. Me I'd rather pick when I want it to run it. Have you been able to succesfully burn a CD yet? Try and get some more of those verbs if you can too.
Good news! After uninstalling Sonic and all that, I just successfully burned a couple cd's and then decided to try a DVD and it worked. I'm gonna try another one in a minute and see if it works!
My next try was again successful, but was then followed up by two fails (one at 0% the other at 30ish% crap, it really got my hopes up that it was gonna start working. Here's the error report. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <TEAC DV-W28EAT> Version: 7.3B - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 1419kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TEAC DV-W28EAT atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TEAC DV-W28EAT D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (456944kB) Free physical memory: 137MB (141040kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.6.2006 NeroAPI 10:29:01 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:29:01 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:29:01 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:29:01 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:29:01 PM #5 Text 0 File Writer.cpp, Line 122 Writer TEAC DV-W28EAT running 10:29:01 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:29:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:29:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:29:02 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:32:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 10:32:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:32:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TEAC DV-W28EAT, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 10:32:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.) 10:32:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TEAC DV-W28EAT] -------------------------------------------------------------- 10:32:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TEAC DV-W28EAT] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 10:32:27 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:32:27 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:32:27 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:32:27 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:32:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:32:27 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:32:27 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:39:40 PM #23 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:39:40 PM #24 Text 0 File Reader.cpp, Line 385 Exception value: -1 10:39:41 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:40:10 PM #26 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 10:40:10 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:40:10 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Well the + side is you did get a few burns in this time deja vou - almost same error log. Same Error reading data & Exception value: -1 Hmmm still need to get rid of the discs you're using - but verbs also gave you this problem. Check and see what's running when burning In your system tray (right hand bottom corner) stop any programs there that aren't needed like iTunes (if it is). You can also look in task manager (crtl/alt/del) then processes tab and look there. See if anything stands out (leave anything w/ system under user name alone). What type of pc is this? Still under warranty? I'll have to think a bit on this one. You've done alot of cleanup/maintenance.
I got 2 successful burns today and 1 failed. I hadn't closed out my internet connection and all that good stuff during the fail, so I'm thinking I might be able to get at least spotty success right now.
Well that's at least a 66% success rate Watch those discs though cause even if they did burn you may end w/ playback problems now or in the future. Best Buy has 100 Fuji for 29.99 starting tomorrow - look for made in Japan only these usually are made by Taiyo Yuden - top notch. Or online try http://supermediastore.com Still do the system defrag, disc cleanup on a regular basis. The chkdsk is another good thing to on a somwhat regular basis. CCleaner is also good when uninstalling programs - just watch some registry cleaners can be a bit too agressive but you should be good with ccleaner. Always good to keep the pc as clean as possible to try and minimize/stop problems.
