just baught box need some help please to get started.all channels tuning but not coming through on telly
ok i'm not realy sure wat you mean so first of all make sure that the cable is in the (rf) input and not in the antena input on the back of the box. and then again it may need to be flashed with the latest firmware, what does it say on the screen when your on a channel? does it say (please wait code updating)?
but does (please wait code being updated cum up on the screen) if it does you need to flash in with the lastes firmware, coz thats sounds like the prob. go to the eurovox uk and ireland flashing guide and follow the instructions and make sure you do a factory reset and use the correct symbol rate and do a power scan then if your short channels just manually add tp frequencies, these are the 1's i had to use 410.000 418.000 and 426.000 on your symbol rate then just update channels,no need to do an othere power scan and i'm almost positive that will work. if it dont im puzzled
Your box has obviously not been flashed as each poster has told you, so just go to this link and follow the guide, courtesy of HiTeck okay. >>>>>>>>>>>>> http://forums.afterdawn.com/thread_view.cfm/674371 You can then identify your box and even get the correct Firmware all in one place.
