Eurovox 2007 Red

Thanks

 

Youre welcome.

 

hope we get this one back soon.sharing sums this site up.

 

Hi Scouser,

Just got my Jtag lead. Can you talk me through it please.


Jlewis

 

Hi

I done jtag then loaded firmware but the number 126 comes on display thats all

 

Does it have an Intel chipset or an ST one?

 

Hi Scouser,

ST.
I have jtagged twice and flashed all i get is number 126 on display.

Jlewis

 

Hi Scouser,

My head is wrecked with this IO hope that you can help.


Jlewis

 

Have you followed the instructions that came with the jtag? Are you using SkyMax or Jkeys and are you erasing and rewriting to the tsop or are you getting errors?

 

I follow this below however i get an error on whiteflash 80002000

run skymax
click on 2mb(ox7fe00000)
click start
click erase
click write(will ask you to load tsop flash file)
should take few minutes to write
switch the box off the on when writing is finished
the box will be up and running now
load any pre june update flash.

 

Are you using the 2007 tsop to write to the box?

 

it is eurovoxred tsop modified 03/07/2007

 

Post the exact message you are getting in skymax please. Post the exact logfile as appears on skymax screen.

 

Init JTAG
IDCODE : 1D405041
CPU : STi5518
Stop CPU
Clear Trap : Please Wait...
Load Trap -> Ram : Please Wait...
Load Trap : LEN Ok
Init Trap : Please Wait...
Trap_Wptr 80000534
Trap_Iptr 80000140
Start Trap : Please Wait...
Load EMI : Please Wait...
Init OK
---------------------
Init JTAG
DCU OK
Trap_Wptr : 80000534
Erase ADR[7FE00000] : Please Wait...
Fail


Init JTAG
DCU OK
Trap_Wptr : 80000534
File : D:\blue eurovox max\eurovoxred tsop.bin
Write Flash ADR[7FE00000] LEN[00200100] : Please Wait...
Error writing flash at address 80002000 ACK = 00000100
Write Flash END
---------------------

 

Are you sure it is an ST chip and not an Intel one?

 

the big chip has st and omega below

 

Strange should be fine have you tried jkeys? Is your OS xp or vista?

 

havent tried jkeys dont know what they are. xp professional

 

Try this method using the same tsop file.


Connect JTAG and Power up EuroVox

Start JKEYS

Click on "Development Panel"
Click OK to ingore the warning.

** SEE BELOW IF YOU GET AN ERROR HERE **

If all goes well you will get into the development panel.

In the user functions box:

Type in the address: 80000000
Click on "Load to . . ."

Select the file "unlock_28FxxxC3.bin"

Click "Trigger User"

Close the current window.

Click on "Flash Programming"

Choose the model number as: DXD426RD (1 Chip-GLA)


In the section on the right:

Leave the box above set to "Full"

Click "Erase"

Select YES. This will take a minute to erase.

Click on "Program"

Select YES to "Program at address 0x7FE00000, size 0x200000?"

Choose your TSOP file

Sit and wait for OK to become active, then click it.

Close JKEYS and power the box down.

Disconnect your JTAG

Power the box on. If all has gone well then it should boot up ready for you to rescan for your channels.




*** If you get an error trying to get into the devleopment windows ****

Power the box down and run SkyMax v2.2
Power the box up
Press start.

This seems to reset the box when JKEYS cannot connect (DCU errors).

Close SkyMax and start JKEYS and try again.



Personally I went with Skymax first and then jkeys as it seems to work better.



SkyMax 2

http://www.mediafire.com/?8fzumnj1k9g

Jkeys
http://www.mediafire.com/?e9dyyzgn8q3

 

HI Scouser,

Sorry I couldnt back to you I have been away just got back. Not sure I understand what you mean about jkeys.

JLewis