Eurovox and confused

All it says is Waiting for response from your reciever,so i just leave it at that?

 

Are you using the USB Adapter also ? And did you install the driver for it

 

I'm only using the 25 pin port at back of computer with the null modem connected to it,could'nt get usb adapter today.Would i need the usb adapter instead?

 

They will have the USB adaptor in the shop tomorrow,so i could get one then if its going to do the job.Plus it would save me the trouble of torturing you tonite.

 

You will need the USB to Serial 9 Pin Male Adaptor PLUS the NULL MODEM CABLE to use in conjunction with the USB Adatper

 

Many thanks celtic71 will get one first thing in morning.Thanks for ur help

 

Make sure you get the 9pin female to female NULL MODEM CABLE

 

have the female to female modem and just got loan of usb converter so bout to run the cd,let you know how i get on. Thanks for all your help

 

Ok be careful its not the rs232 cable as this will NOT work

 

LOL celtic71 you have the patience of a saint,i think im using the rs232 cable and thats why it says cannot detect reciever.So i shall go tomorrow morning and get the ---- Serial null modem 9pin female to 9pin female cable ---- Is that right.Look what you have to look forward to tomorrow, AGAIN! Sorry bout all this.Many Many Thanks for your time.

 

I think women have more patience than men lol

No problem , Yes that Serial NULL MODEM 9pin female to 9pin female cable is the correct one you need , also you will need the USB to Serial 9 Pin Male Adaptor as your PC has no 9 pin port

Come back tomorrow when you get these if you get stuck , good luck

 

Evening,Celtic71 went and got the null modem cable,still nothing happening.where it should say Version2.10 detected then start, all it says on mine is COM 3..., then start.says it cannot detect reciever. Any ideas? Cheers dooter.

 

when i do click OK it goes to boot mode.
Says, Reciever not detected.
If i want to download the firm ware in boot mode,Click Ok button and AC power on your reciever.
COM port setting. com 1 com 2 com 3 com 4.
Starting to think we may give up the ghost on this.LoL

 

Ok have you installed the driver for the USB Adapter first

 

yes says hardware found and ready to use

 

Celtic71,got a loan of a computer with the 9 pin port,when i click on download it says version 2.10 detected,then when i click on start it says system reset.Should i leave it at that and see what happens.

 

That should be it , The Beta 2 will auto reset it for you

http://forums.afterdawn.com/thread_view.cfm/582883

 

I have it now where i can get to menu etc etc,yet no channells,if i go to update channells it says "No Transponder to Scan".It will power scan but still no channells is there a certain frequency.Bye the way thanks for gettin me this far.

 

celtic71, you will be glad to hear i have now got channells,only 36 at moment but at least the box is working.Thanks to you.Though i dont have the standard channells like bbc1 itv 4 or 5 rte.though im sure ill get there,especially with your help, lol.I'm in Belfast are there any frequecies or codes for here that you know of. Cheers,your my HERO.

 

Now up to 56 channells still none of the ones i mentioned,i've been reading thru some of the other posts to see if i could find out how i can get them,no luck yet.I was going to power scan but afraid of loosing the ones i have at present.your help and patience was unbelievable, THANKS A MILLION!Though hope you dont mind if i call on you for further help. Cheers for everything, Dooter.