Eurovox flashing step by step.

If you have a PC using OS XP and the correct 9 pin port, (and the correct NULL MODEM lead) - then 2 minutes max, so suggest if it is your first time of flashing - then get to one or the loan of one.

 

Hi folks HELP!
Me again ran the ex1000sl firmware 090713 07-2009 I am using a usb - null adaptor,when I hit down load i get prompt to select port select the port then hit download keep getting waiting for response from ur receiver

 

turn power off while looking for ur box then turn it back on

 

turn it off altogether or put it on standby? Cheers for the help.

 

thanks EAMO_TOO, i did sorted out, it was my mistake, thanks for suggestion.

 

will it find receiver (box) if box is unplugged.I have unplugged box and hit download still shows waiting for the esponse of your receiver?

 

I have tried turning on/off many times after selecting com and "waiting for response" message showing ...

I have used a loolback test in hyperterminal with pins 2 and 3 ... the loopback test is not a success.

Could it be a dodgy adapter??

Seriously thinking of just chucking the damn box in the bin ... to much of a headwreck ...

Anyone any ideas?

 

Right Lads got the eurovox1000sl working
anyone know if theres a fix out for Eurovox MaxV?
Thanks for the help.

 

BTW I have the Prolific Serial to Usb drivers installed and i have reassigned com port to Comm2 ...

The selecting comm 2 in flashing software ...

But no success the box is not being recognised

 

see coule of post up

 

Hi Folks
I am having the exact same issues as jpzzz.I am torally p1ssed off with this now;I have noticed the firmware for the ex1000sl is .exeand all the others are .rar .

 

Thank Yous all the box is working great, love yiz all lol.

 

there is no fix for the older boxs

http://forums.afterdawn.com/t.cfm/f-59/only_boxs_working_in_ireland_hints_and_tips-updated-782583/

YOu need to read the thread on assigning ports and drivers, in the above link

 

EXE. is fine, Just means executioner + Firmware is built-in
When your com-port settings are right + USB driver is installed properly
you won't find an easier box to flash. When loader is looking for com-
port, you could try powering-off P.C.+ re-boot.
Other option; Use Desktop or old L/top with 9-pin port & use Null-Modem
cable only.

 

Hi all
New to here and having an issue with my 7000 hd ,
Downloaded the latest nag fix , changed the file to flash.tbn
switched box off and on but during reboot , the plug was pulled and lost power.
Now when I put the box on the front screen just says now booting...
after that goes blank , then nothing on tv screen or front of box??

Anyone any ideas what I've done here apart from being an idiot :-(

Is there any other files apart from the firmware I can download
Help....

 

THANKS EAMMO
GIVING UP FOR TODAY,USB DEVICE SETTINGS DEFO RIGHT AS I WAS IN MALPINS 2 HRS GETTING THEM TO LOAD(BLOKE WAS DEAD SOUND)HOW DO I CHECK THAT THE COM PORT SETTINGS ARE RIGHT.WHEN I DISCONNECT AND RECONNECT THE USB MESSAGE NEW DEVICE DETECTED PROPERLY INSTALLED.
CHEERS

 

hi all, just wondering what's the working boxs for ntl dublin
which of the dream boxes work if any
does the Kryptview Arnet work for ntl dublin

thanks in advance

 

Hi all .. Seriously cracking up. I have a Eurovox Max red, I have never updated anything on it and I'm now trying to upload new firmware for nagra 2 fix for n*l Ireland. I took advice and bought null modem cable + USB adaptor. I've download win rar + new firmware(red) and I then proceed to try up date and I get as far as waiting for response from receiver ..,... I'm cracking up..., can anyone help ???

 

There is no update for the eurovox max red nag 2, the fixes on page 1 are for the ex1000, ex5000 ex5100 and the ex7000hd.

 

Please say your joking.... I'm after spending €30 on cables. On the first page of this thread it has the Eurovox Max Red box ????