Eurovox flashing step by step.

try a hard boot,unplug the box then press download on the ufl,then plug the box in,it may take a few try's.

 

Thanks Karljd

that worked a treat after the third go

Regards Gary

 

nice 1 glad your sorted.

 

hello there i have a eurovox blue box and i have updated it with the ufl blue box firmware 2007 however the power scan does not detect no channels any help.

 

check your symbol rate is correct when scanning. the instructions for this is on page 1.

 

erm yeh i have checked the symbol rate for ilford which is 6.887 but it still does not pick up any channels, the signal goes from low to high when carrying out the power scan.. thanks for the help hitech

 

Check to make sure your feed is pluged in the RF in and not the ANT socket at the back if that doesn't work check your original subbed box to see if your feed is live.

 

Hello ,have a eurovox 1000 on N-L in Santry . Receiving 130 Channels but only 6 are not scrambled ! From reading Thread above does need I have to flash or is there anything else that I can do ,Thanks.

 

If it is a new box then you will only receive FTA channels, it needs to be flashed with the firmware, so go to the link Eurovox Flashing Guide under HiTeck's post and follow the guide, "On First Page Of This Thread.

 

I have just recieved my eurovox ex5000 today, after reading your helpful thread i have downloaded the firmware and will install tomorrow when I get the cable. One big problem is I cannot access the hidden menu that I have read about elsewhere. I know that this may not be needed (tried pressing menu and press yellow or go in to languages and enter 1968) but does this mean my box is faulty??? Getting a bit worried I may have bought a dodgy box but the company I bought from seem reputable. Please any help would be appriciated. Again thanks for the helpful thread........ Ken

 

Have you flashed the box? when you say downloaded firmware, do you mean that you have dowloaded it onto the PC? and that you are going to get a NULL MODEM lead tomorrow?

 

Hi again, I have not as yet flashed the box. just downloaded onto my pc until i get the cable tomorrow. Would this make a difference as to why I cant access the hidden menue??? Ken

 

Hi, forget my last post, ive been reading other threads and now know I need to flash before I do anything else. Hopefully all will go well tomorrow Ken

 

Well done for reading back.

 

Hi there,

A few boxes are down Wirral & Lpool area today. I've checked with Wirgin meedia web and only Warrington is down today.

Any ideas would be appeciated??

cheers.........nando

 

HELP!! my EV 5000 today keeps coming up with message: "Please wait: code being updated...", and stays that way. I've tried Factory reset and rescanned, but then am only picking up 1 TP, and even that is not showing, with the same message coming up. Any ideas what is wrong? Would appreciate help soon,
Thanks

 

Malci ,Thanks for that will follow the leads later,Cheers.

 

Lets hope this thread doesn't get closed down.
I think we now know the auto updates no longer work, but as asking for codes is banned then everyone will have to wait until a fix is sorted out.
Keep up the good work you guys.

 

Hi guys I live in glasgow and my eurovox max v is down saying please wait code being updated. It was last flashed inu
June or July does it need done again. Any help on this matter would be much appreciated

 

all boxes are down please be patient these guys are working to solve it asap
sue