Eurovox flashing step by step.

sorry bout dat thanks for the help anyway hi-tec. if there is anybody who knows how to re-start a eurovox max v from scratch and put the best soft ware on to it your help would be greatly apppreciated thanks ger in d 24 ireland

 

I will try again.

@gerryclar

Please answer all the questions, its easier for us to help you.

1, What does it say in your system info?- Press Menu, Config, System info and type back whats in there.

2, If you flashed your box before did you use the 8% signal fix.

3, Where abouts are you.

 

no it never came up before i selected only at the end of the power scan i sellect upgrade stations and it comes up no transponder ive done the deep scan the same thing comes up

 

put the mflmax v 51208 on to it dont know why it wont work

 

Thanks to HiTeck and all - but still no nearer to solving why a few of the boxes I flashed today still wont autoroll the codes!
Any ideas!

 

gerryclar

I am still waiting for you to read and answer the questions. Your not reading and taking notice of what I asked you!

 

If you have flashed them correctly they should autoroll, did you give them enough chance to update?

 

I weasn't present when the boxes were plugged back into the cable but I'm told that 2 of them were left for more than an hour!

 

Try again when present or tell them to change the channel then wait 5 mins then change and wait again. The new firmware is proven to autoupdate if you have flashed it correctly in Ireland.

 

Over the last hour or so I've flashed a dozen or so boxed and connected them to the cable and they rolled no bother, but to add a bit of spice to the proceedings I decided to see if there's a right way and a wrong way ( or several) to re-flash a Eurovox!

Some boxes I flashed whilst in standby - some with a channel selected

Some I powered-down the unit when "system reset" was requested - some not.

Some I put a current CDF file on (with Voxer) some I tuned manually.

But all autorolled!

 

So everything is fine then? considering they all autoroll

On my way for tonight mate, all the best.

 

Thanks for your input HiTeck - appreciated!

 

No problem goodnight

 

what should the system info say for a eurovox ex5000 with the latest firmware installed?

 

S/W Ver Oct 28th 2008.

 

Hi HiTeck,

I am in the Watford area...WD19 postcode....

 

attention HiTeck:
How are ya? hope all well....i remember u advisin me back in april....am in the 6952 mbaud area and have reflashed the box so the channels are back up thankfully....only prob is, the full power scan no longer brings up Setanta channels or anything betwen 423.000 and 435.000....its a shame, coz they are most of the sports stuff....infact, just before the new fixes came out, and when using codes, all those channels showed 'No signal'...my neighbour is experiencing the same....is there anything you can suggest that can bring back those channels? look forward to hearing from you...
thanks

 

I can no longer run the Eurovox PVR 5000 firmware. the link now brings you to a .rar file that will not open????

Vin

 

You will have to download and run WinRar software, there is a link to this software on page one of this forum by HiTeck

 

Download this Winrar and install to your PC and use that to unzip the .rar and .zip files you need to download as and when okay, it is free.

http://www.4shared.com/file/28733441/7c4273a7/wrar35.html?dirPwdVerified=fa0dfbb0