Eurovox Max problem

Simon, Panasonic,
Let me knw what you guys think, this is the info I gathered
Model DVB-XC BOX
S/W Ver 1.0 SSC4 Feb 14 2007
H/W Ver 2.0 Feb 14 2007
Bootstrap v.001

I hope this helps, u guys are legends

 

p.s mine is a eurovox max v 2007

 

Hello, i have just updated my eurovox max 2008 with the new firmware, but when i got to scan for the channels i get nothing. Is there anything i can do ?

 

it's not meant to find the box. The box sends no auto data for the PC to recognise. I'm pretty sure that once you are connected and run the firmware flash loader then the box will be found by the UFL and give you options to flash it.

 

this is a bit of a long shot but try changing the port number in device manager to port 1.

make sure usb adaptor is plugged in, go to device manager, double click ports, right click the usb converter one and select properties, click the port settings tab then advanced and com port number will be at the bottom, change it to port 1. if there is alreday somthing assigned to port 1 then change what ever it is to port 4, just remember to change it back to port 1 when you are finished. let me know if this works.

 

grr 2008 i ment ..im haveing a bad day..and the baggies are on sentanta tomorrow..grrr lol

 

i've not read all your previous threads but i'm guessing that you've got a usb to serial converter, if so your laptop will have probably found it on com5 or 6 or even higher and i don't think that the software supports anything over com4, what you have to do is the following:
go into device manager and select portc (com & lpt),
from here select your usb port (let say it's com6), right click & select properties
from here click the port settings tab, then the advanced button
from here select the port mapping tab and map your com 6 port to com2
click ok. close everything down and try again
hope that helps

 

im pretty sure thats a red box dude, can panasonic confirm?

 

red box.

Also sorry. I'm having trouble answering questions over 2 threads as I am still under this ridiculous 3 minute post rule.

first box I flashed did this and I had to do a factory reset on full ( remember to use the correct symbolrate ) for it to find the channels. After that it was fine.
symbolrate and area provider information in this text file.
http://www.mediafire.com/?tasdvnm2alg

 

anything on these simon?

 

i know its been said a million times, i have got a null modem cable on order, to avoid dissappointment when it arrives, do i need anything else to reflash my box

 

CAN ANYONE HELP ME, IVE UPDATED MY EUROVOX 2008 WITH THE LATEST FIRMWARE, BUT WHEN I GO TO SCAN FOR THE CHANNELS I GET NOTHING. IT SAYS NO SIGNAL, IS THERE ANYTHING I CAN DO. PLEASE HELP THIS IS BECOMING VERY ANNOYING.

 

unplug and plug back in all of your leads at the back of your box

 

hello lijosony i have a 2007 box can you go trough step by step how to down load the firmware from cable to get and from saving my channels

 

Ill try that one, thanks.

 

a bit of a computer virgin here how do i get to divice manager

 

i still get no signal =[

 

right click my computer and left click on manage, device manage appears on the left

 

please can anyone answer my previous thread i`m really stuck here and the box has been off 3 days,i managed to sort my starview but this is a different story altogether,many thanx