Eurovox Max problem

Im on V and live in stoke (staffordshire) and my mrs is on my back. please can someone give me the info that i need to get my Eurovox Max V working properly. Ive tried loads of codes now and just cant get the thing to stop searching for codes. Its doing my head in. Im a complete newbie so please go easy.

 

Hi folks, Can anyone give me the codes for Vi Med in the Glasgow area for Eurovox 3 please.

 

Just tried the codes posted by DDDDano but get the same old 'please wait codes being updated' message.

Am with V***in (used to be N*L) in oxfordshire.

Anyone got codes that might work for me???

Does the area etc make any difference to the codes???

Many thanks,

Mr Benn

 

you can download the fix for it now,
you need a cable to connect your box to your pc,( should have come with your box ) the software which you can get off the BigMAQ toolbar under Updates/fixes, and the instructions to do it are here http://www.4shared.com/account/file/4135...Max_V_2008.html
Good luck

 

try the C&W codes, they have worked for other people whose provider is nthell for some reason:

5C 01

Ex C&W 11th April

00 = F1 48 4E 64 5A E1 A2 70

01 = F2 73 A9 0F 26 09 69 0A

the area doesn't make a difference as to what code, good luck

 

Thanks . I thought it was just a matter of putting in the right codes? What does this update thing do? Appreciate your help.

 

update shud auto update your box when they change codes

 

that last link shows as not valid...

which of the max-v updates do i use from bigmaq? and how do i then go about doing it...???!!!

Many thanks,

Mr Bennnn

 

can anybody give me the new codes, for euro vox, in cork ireland please.

 

we need to know ur provider etc.

 

Coool!

 

crezza 79, does the SC 01 mean 5C 01? I just tried the latter and still doesn't work!

Eurovox is startin to squeeze my brain!!!

regards,

Mr Bennnn

 

Anyone pls help. I installed a USB to serial cable and null modem cabel, downloaded update and tried to install. Kept getting message 'receiver not detected'

I then installed a coms port cable and connecter, loaded same and tried again. Same result Any ideas.

 

mrbennn that would be 5C 01

 

dsaund, sounds like u got a ev blue or red box like me cuz i get same thing.

huh wtf can't post more than 1 post every 3 mins...... that sux
how can a help if i cant reply.....

 

Yes sorry lol

 

Any1 able to help me. Got a Eurovox last week but still haven't been able to get it going. Reading all this stuff about codes. Supplier is Ch**us so have input 5E01. Have input lotsa codes for key1 and key2. I understand the symbol rate for Kildare is 6875. Done scan after scan after scan but just can't get the thing working ????

HELP !!!!

 

I copied this yesterday from one of the posters to do my own one, its pages back, hope these are still the correct instructions

Originally posted by JDevlin:
________________________________________
To tell you the truth I am lost, too much information flying about. Is there an update for the Eurovox Maxv 2008?
________________________________________

Yes,
maxv firmware here: http://www.box.net/shared/static/m5eo2cbkkg.rar

password is: techwatch

You will need:
A null modem cable (serial cable) – if you don’t have one – get one. You cant update without it.
Winrar – download here: http://www.rarlab.com/download.htm click on WinRAR 3.71 at the top

Connect your eurovox to you pc with the serial cable, put the box in stanby.
Unpack the file i posted earlier with winrar. Inside the file will be the loader utility and a notepad doc.
Open the loader utility.
You may first want to backup your chanel data so you wont have to rescan for chanels.
To do this, click on the browse tab, choose a location to save your chanel data and click UPLOAD.
Now to update your firmware, click on the download tab (note there are two download tabs, to update firmware click the highest download tab, the one on its own)
Click start when the new box appears.
Wait for update to complete.
Now you can put your chanel data back on, to do this hit the browse button, select your chanel data file and press the download tab that is next to the upload tab.
When completed hook the box back up, go to an encrypted chanel and allow about 15 mins for codes to update.

 

Download toolbar from here http://bigmaq.ourtoolbar.com/
then go to updates/fixes, Eurovox fixes, Euroxox max-vbox the fix you want is the bottom one dated 10/04/08. Instructions on how to flash your box are here http://www.4shared.com/account/file/41353408/26d4f5e5/001_How_to_flash_the_Eurovox_Max_V_2008.html

good luck

 

Hi,

Just wanted to thank Simon, Panasonic and everybody else who helped sort the recent code issues.

I had a double wammy, not only was I without Tv, but also my wireless internet went kaput. Thankfully both have now been resolved.

The new firmware which I downloded through Simon's link. had already sorted favourites into catergories. I had deleted my own ones in my own attempt to resolve the code issues, so this was a nice surprise.

Thanks again
Beaten